Price is on first post... full kit is 75 bucks shipped, partial (no trunk or license plate LEDs) is 60 shipped in the lower 48

 

Hahah actually what caused it to short was me messing with the prong on right side map light. It wasnt keeping the connector firm, which had juuuust enough play to wiggle and loose connection. I used my finger to push the prong so it rested closer to where the connector goes and *click* everything went dark.

Not going to lie, i was prodding around with a tiny screwdriver but that isnt what caused it lol.

 

Yeah, the map light socket prongs are basically always on, so shorting those two prongs together will do it




You too can have beautiful brilliant white or blue light adorn your vehicle...PM or post here! I have many kits still available!

 

Who wants blue?? I got blue in stock! White too...and yes you can do a mix of the two colors!

 

It up

 

is it possible to have my reverse light to be different then Wight? do you have anything for that?

 

You can have it be any color you want but legally it has to be white. I don't sell reverse LEDs sorry

 

do you have a link where I could get some? is your door and reading lights direct fits? and ya I know its not legal but im willing to take the ticket, pluse how often does a cop see me reverse. HAHA

 

Ebay.com

 

 

 

All PMs replied to

 

All PMs replied to

Also, I have been asked about RED. I HAVE LISTENED! I ordered a few sets of red from my supplier and they should be ready to ship out by Mid-May!

 

Happy Monday! Who wants to look good?

 

I've got RED available for your Door / Dome / and Map lights!!!

Remember, I can do any combo of cool white / blue / and red you'd like......what's more 'murican than that?

 

Still alive, just FYI

 

do you still have any of those blue kits left?

 

I don't know if it has been suggested, Amerikaner83, but you should look into offering an LED kit to replace the LEDs in the OEM rear spoiler. I think that would be a big hit

 

That spoiler light isn't all that easy to remove, many people wouldn't even have the tools to do it..

 

agreed! total PITA!

 

I replaced mine.
Took the spoiler off to do it.
PITA is right.

 

I do understand the frustration......I tried to do mine as well. Getting it off the car was easy enough without removing the entire spoiler. I had a right angle philips head screw driver to remove the LED light only. 5 to 8 of my LEDs were bad, out of the total 48 if I remember correctly. 4 screws and it came right off. I proceeded to do a very botched up soldering job and ruined the whole unit.

Paid $144 for new OEM.

Still, I think it's a big opportunity for Americaner83. With these newer and greater assortment of LEDs, you can make a brighter LED taillight, multi-color (but mostly red hopefully) etc.

 

hey bud just curious how much for just the maplight in white? i only have one map light. everything else in my car is white led and thats the only one i dont have

 

Spoiler would be nice to do, and I have thought about it...but like mentioned it's a royal PITA to do. And since I'm not an electronics / manufacturing company (only work for one LOL) I won't have what I need to in order to make replacements cost effective.

Re: map lights...only one? PM me, 15 bucks shipped ConUS.

 

 

That'd be me


New year? How about a new set of lights for your car? COOL WHITE SETS ARE IN STOCK !!! Same with BLUE!!!

 

I have to say im super impressed. I ordered a cool white kit after talking with Amerikaner about what he could do and what i needed. Sent payment on 3-14 and they travelled from WA to FL and showed up in my mailbox today, 3-16. Got some fancy-pants LED's and even threw in some extra pieces for the install just in case.

I will do my part and throw up some pics of before and after install. I cant recommend this seller enough, buy some freakin LEDs dudes (and dudettes), this man is doing the lords work.

C

 

You got them already? Wow. I wasn't expecting them to get there until tomorrow, though I told you Wednesday just to be safe. Hows the shade of white? Not too blue, I hope?

Glad you like 'em

 

I just installed the map light (thanks for the extra connectors, i needed it) in the parking lot before work this morning. Just a slight blue tint, perfect. Stupid bright even with just the map installed, cant wait to do the rest tonight. Thanks again for all of your help, A++

 

Happy to help!


I've got tons and tons of BLUE in stock and ready! Gotta replenish my stock of white though...

 

Any install pics of the blue and red?

 

In the first few posts in the thread I should have install pics of blue and white, but you can see some of my custom stuff here


I do not have a red kit picture. I haven't done much with red.

 

If I'm reading correctly the kit is all white and if I wanted blue it would be the doors only?

 

Nah, I got an entire blue kit if you like