Maxima Forums

General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Is there an aftermarket front anti-sway bar for the 4th Gen Maxima?

Thread Tools
 
Search this Thread
 
Old 09-03-2002, 09:33 AM
  #1  
Donating Maxima.org Member
Thread Starter
iTrader: (1)
 
Blade_99SE's Avatar
 
Join Date: Aug 2000
Posts: 189
Is there an aftermarket front anti-sway bar for the 4th Gen Maxima?
If so, who and where can I get one? I believe this would be a cheap way to cut down on the body roll.

Thanks

Blade
Blade_99SE is offline  
Reply
Old 09-03-2002, 09:36 AM
  #2  
Supporting Maxima.org Member
 
clee130's Avatar
 
Join Date: Oct 2000
Posts: 9,159
Don't believe so.

There are the Sub-Frame Connectors from WarpSpeed though.

Do a search for SFC.
clee130 is offline  
Reply
Old 09-03-2002, 09:49 AM
  #3  
Donating Maxima.org Member
Thread Starter
iTrader: (1)
 
Blade_99SE's Avatar
 
Join Date: Aug 2000
Posts: 189
Originally posted by clee130
Don't believe so.

There are the Sub-Frame Connectors from WarpSpeed though.

Do a search for SFC.
I'd love to get subframe connectors but in the SCCA Solo II world that would bump me from STS to a Preparded class. That's not the best place to be.
Blade_99SE is offline  
Reply
Old 09-03-2002, 10:18 AM
  #4  
Minister of Silly Walks
iTrader: (11)
 
mzmtg's Avatar
 
Join Date: Oct 2000
Posts: 13,786
While a stiffer front anti-roll bar would cut body roll, it would also increase understeer. This would not be a good trade off considering we have too much understeer to begin with.
mzmtg is offline  
Reply
Old 09-03-2002, 10:39 AM
  #5  
Senior Member
 
sinewave's Avatar
 
Join Date: Jan 2001
Posts: 1,277
Originally posted by mzmtg
While a stiffer front anti-roll bar would cut body roll, it would also increase understeer. This would not be a good trade off considering we have too much understeer to begin with.
I agree. What I would love to find are adjustable end links so that I could loosen the stock FSB.
sinewave is offline  
Reply
Old 09-03-2002, 10:49 AM
  #6  
Minister of Silly Walks
iTrader: (11)
 
mzmtg's Avatar
 
Join Date: Oct 2000
Posts: 13,786
Originally posted by sinewave

I agree. What I would love to find are adjustable end links so that I could loosen the stock FSB.
How would adjustable links loosen the bar? Wouldnt they just move both ends up and down together?

I dont see how this would change the stiffness of the bar/system...
mzmtg is offline  
Reply
Old 09-03-2002, 11:02 AM
  #7  
RIceD OuT moDErAtor
iTrader: (1)
 
Chebosto's Avatar
 
Join Date: Aug 2000
Posts: 3,146
did you get the energy suspensions front sway bar bushings? there's like two kits out. one kit is just for the front sway bar. and the other kit is a full set for all the bushings in the front suspension...


courtesy nissan has em.
Chebosto is offline  
Reply
Old 09-03-2002, 11:13 AM
  #8  
Senior Member
 
sinewave's Avatar
 
Join Date: Jan 2001
Posts: 1,277
I have seen adjustable end links (for other applications) that have a spring in line with bushings. You can adjust the spring pre-load, which effects how soon the body sway is transferred to the sway bar.
sinewave is offline  
Reply
Old 09-10-2002, 05:35 AM
  #9  
Conecarver
iTrader: (19)
 
BEJAY1's Avatar
 
Join Date: Sep 2000
Location: NW Chicago burbs
Posts: 3,855
Originally posted by Chebosto
did you get the energy suspensions front sway bar bushings? there's like two kits out. one kit is just for the front sway bar. and the other kit is a full set for all the bushings in the front suspension...

Courtesy nissan has em.
An ES full set for the Maxima? I'll call right now. I'm sick of trying to piece it all together?
BEJAY1 is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2006 Nissan Maxima 3.5 SE Transmission problems
Lakersallday24
6th Generation Maxima (2004-2008)
13
03-20-2024 11:22 AM
Maxima Lower radiator Support
CRizz
5th Generation Maxima (2000-2003)
41
06-07-2021 05:42 AM
CA Eibach Lowering Springs... BRAND NEW $220
morteljc
7th Generation Classifieds (2009-2015)
15
10-19-2015 10:47 AM
UT WTB: Headers for a 2006
PhalC1
6th Generation Classifieds (2004-2008)
1
08-05-2015 02:36 PM
Back to Subforum
General Maxima Discussion
View Next Unread
2002 Maxima needed for NPM




Advanced Search
Quick Reply: Is there an aftermarket front anti-sway bar for the 4th Gen Maxima?


Reply Closed Thread Share

All times are GMT -7. The time now is 08:53 AM.