General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

will full metallic pads eat stock rotors?

Thread Tools
 
Search this Thread
 
Old Jan 17, 2003 | 03:59 AM
  #1  
† ErV †
Guest
 
Posts: n/a
will full metallic pads eat stock rotors?

i got some rotex gold metallic pads the other day for a friend who bought new nissan front rotors. now though he is panicking that the full metal pad will eat his new rotors away. the pads in question are not rated 'race', or 'high performance' or anything that would suggest they are overly harsh on rotors but i never had any experience with them on stocks.

i use them on my new slotted disks and have no problem but dunno about the OEM parts.
Old Jan 17, 2003 | 04:02 AM
  #2  
redmaxpa007's Avatar
i SeE what you did therE
iTrader: (21)
 
Joined: Nov 2000
Posts: 41,704
From: the DAMN south
they will work fine..



tell you friend to calm down
Old Jan 17, 2003 | 07:46 AM
  #3  
Donkey®'s Avatar
wat
iTrader: (3)
 
Joined: Apr 2002
Posts: 4,597
If you use the car a lot and drive it hard, the metal pads WILL wear the rotor down quicker. Otherwise, MAYBE, slightly higher wear may occur...but not enough to notice.
Old Jan 17, 2003 | 09:19 AM
  #4  
carnal_c30's Avatar
Former Sponsor
iTrader: (38)
 
Joined: Nov 2000
Posts: 7,799
From: Everywhere, CA
after a few track days depending on how bad the pads are you might notice

but stock rotors are cheap

next time choose a street pad if you friend is so concerned
Old Jan 17, 2003 | 09:51 AM
  #5  
† ErV †
Guest
 
Posts: n/a
well he bought them and told me to pick 'some good pads' since his local place didn't have the right size. we'll put them on and see how it goes.

thanks
Old Jan 17, 2003 | 09:54 AM
  #6  
Jeff92se's Avatar
I'm needing a caw
iTrader: (82)
 
Joined: Aug 2000
Posts: 34,127
Are you sure they aren't SEMI-metallic? I have never seen full metallic pads on something other than full race etc..

BTW. Maximas come stock w/ semi-metallic pads.
Old Jan 17, 2003 | 12:18 PM
  #7  
acuratsx's Avatar
Newbie - Just Registered
 
Joined: Jan 2003
Posts: 7
Re: will full metallic pads eat stock rotors?

Originally posted by EvilRoadsVictim
i got some rotex gold metallic pads the other day for a friend who bought new nissan front rotors. now though he is panicking that the full metal pad will eat his new rotors away. the pads in question are not rated 'race', or 'high performance' or anything that would suggest they are overly harsh on rotors but i never had any experience with them on stocks.

i use them on my new slotted disks and have no problem but dunno about the OEM parts.
not likely for nissan...
but if you have a bimmer...with m...say...performance discs...
then different story
Old Jan 17, 2003 | 02:44 PM
  #8  
SamMan23's Avatar
Senior Member
 
Joined: Apr 2002
Posts: 554
if he's worried about it, he can get organic pads. I don't think organics could be good cause they looked like pressed together old newspapers. but they are quiet and nice to rotors.
Old Jan 17, 2003 | 03:53 PM
  #9  
Mal5spdMax's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 131
nah your friend will be fine
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BkGreen97
Maximas for Sale / Wanted
2
Apr 2, 2016 05:47 AM
A32goldylocks
4th Generation Maxima (1995-1999)
8
Sep 16, 2015 01:33 PM
bbsitum
4th Generation Maxima (1995-1999)
4
Sep 11, 2015 04:55 PM
crazyespn
New Member Introductions
0
Sep 3, 2015 01:30 PM
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM




All times are GMT -7. The time now is 07:03 PM.