krismax

iTrader: (15)

Well with 6 months of research and work and sitting and working 40-45 hours with 98seblackmax (wiring genius) its on and kicking .
The hood clears and everything else also clears. Peak power appears to be around 7000-7300rpm but power is everywhere . Theres either equel power down low compared to US manifold or a little more . Engine is also very smooth ,powerband is 100% different.
Well people with pics video or other info please chim in.

nismology

iTrader: (8)

I have the privelege and honor of being the 1st to reply to this thread. Congratulations man. You truly are a pioneer for the 4th gen community.

optimus310

iTrader: (1)

wow...... I must see this

Kevlo911

iTrader: (36)

I had hte privlage to see hte pics b4 this thread



How'd the EVAP and vaccum lines go? What lower manifold did you use? WHat feul injectors/rails did you use.

krismax

iTrader: (15)

Lower 2000 manifold rails and injectors joe wired those up. 290cc's

98SEBlackMax

iTrader: (9)

hehehe

The cat is out of the bag.

Yeah that was one hell of a weekend but we got it working and its a monster. You guys gotta hear this thing at 8000 rpms. Video might be up shortly stay tuned.

and here are some pics I took on cardomain

Kevlo911

iTrader: (36)

Oh yeah, All hte Haters and peeps that say it can't be done can Shut the F up now

maximase86

iTrader: (24)

DYNO! DYNO! DYNO!

Either way, awesome work guys, glad to see you got this working.

S

nismology

iTrader: (8)

Amen brotha!!

|Bijan|

iTrader: (12)

Awesome! But why'd you choose that over a MEVI?

IceY2K1

iTrader: (3)

GOSH DANG IT~!

Now you 4th gens. are going to really be kicking our overweight 5th gens. azz.

J/K...gotta love the PIONEERING effort. Now someone needs to package this into a kit or find a way to mass produce the custom pieces.

Can't wait for that dyno.

Kevlo911

iTrader: (36)

MEVI is not a TRUE varible intake. The 2000 manifold would only give us gains unlike MEVI(lose lots of low end and midrange)

IceY2K1

iTrader: (3)

Guessing until we see a dyno, but no low RPM torque loss *maybe* even a gain, better top end then a MEVI, fuel upgrade for more room, and last a lot cheaper.

You can find a complete VQ-K in the junkyard for dirt cheap.

It's just the custom pieces that are going to make or break it.

meccanoble

iTrader: (22)

ahh, i was wondering how long i could keep the secret in .

I hope you guys come to the June 5th meet, this is going to be awesome man. I got the video on my computer if anyone wants it . Sounds like a beast online, imagine it up front.

Kolyan

yeah what's the difference?

DAVE Sz

iTrader: (2)

Look up, it was already explained. With the MEVI you lose 7-10 hp in low and mid range power and you need the JWT to get it back.

gtr_rider

iTrader: (50)

send video mecca

KsuMax

awesome, Now we need a video to hear this bad boy.

98SEBlackMax

iTrader: (9)

Ok I PMed Endus about the video and his server is up to the task to provide it.

This video was taken at the meet Sunday, keep in mind we got this whole thing running with the Summit switch a few hours before this was taken. Endus took numerous vids and made this short clip. Enjoy

Right click and Save

Max4Speed

iTrader: (20)

This is nice! Great work guys. Lets see some dyno #s.

nismology

iTrader: (8)

Time for a lightened flywheel??

Seems like it takes forever for it to rev up and down.

krismax

iTrader: (15)

Its time for 2000 tranny and JWT cams next

krismax

iTrader: (15)

Im not flooring it, I did it multiple times so I took it slow.

BEJAY1

iTrader: (19)

Nice work. Details on the power curve and instructions whenever time permits please. Low end power loss is why I never went MEVI. Now if I can make this thing look and sound stock

98SEBlackMax

iTrader: (9)

it can be quicker...

Just look when the tach reaches 5K then it gets faster all the way to redline (or is that just my eyes ?). And he was taking it easy on the gas.

aznsap

iTrader: (29)

wow you guys are pioneers. HOW TO?

Terran

iTrader: (6)

So, you want to do it to mine now? Good job though, seems like people have been arguing about this forever.

DAVE Sz

iTrader: (2)

Why a 5th gen tranny? Unless you're just going for the LSD from the 2k1.

nismology

iTrader: (8)

Much stronger 3rd gear and no wheel bearing issues to boot.


FYI, only the 2001 AE came with LSD. Good luck finding one of those tranny's.

krismax

iTrader: (15)

2nd and 5th gears is stronger and nochyness is reduced.

Tatanko

iTrader: (34)

Great work guys

Now, could you go about writing instructions and making a kit of all the extra stuff for the rest of us?

Oh, quick question for those of you discussing the 5th gen trannies: is there any difference in the 5th gen auto tranny at all? I'm just curious...'cause I never knew there was any difference in the manual either.

DAVE Sz

iTrader: (2)

What did I say? I said unless he wants LSD that came with the 2k1.

|Bijan|

iTrader: (12)

How much did you get the manifold for? Damn1, reving to almost 8k!

98SEBlackMax

iTrader: (9)

I wonder where Deezo is, he took a ton of good pics at the meet. Hell there's more stuff done to that engine, those cardomain pics alone don't do this thing justice.

NiNe7-Gxe

i envy you, i guess i can scratch the mevi off my to do list

endus

iTrader: (1)

Here's a RealMedia link if anyone is having trouble. ***PLEASE*** right click and save as...I'll have to take it down if I have too many downloads. I have a few gigs a month so I should be fine though.

Real Media Link

These were the best clips out of all the ones I took. Don't forget...the AC is on for the in-car...I think the shot from outside was after he turned it off though.

phatmax95

iTrader: (29)

Why can you rev so high, no rev limiter? What other mods do you have?

Tatanko

iTrader: (34)

He's got an 8000 RPM rev limiter.

I30tMikeD

iTrader: (8)

Good work Chris!! Thanks for all your help with my TB project. I just finished it a few minutes ago.

Can't wait to see some track or dyno results.

deezo

iTrader: (3)

Sorry guys. Here are the pics....