General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Spoiler Light - Model PUT-SB-001, 4 screws... approx 20"

Old Jul 22, 2008 | 10:33 AM
  #1  
foreknowapparelworldwide
Guest
 
Posts: n/a
Spoiler Light - Model PUT-SB-001, 4 screws... approx 20"

Anyone have one they're selling or can sell? I can't find it anywhere. Not on SpoilerLights.com or Ebay or anything.
I really don't want to have to go buy a new spoiler as my car is a custom color :/ and that would just be ridiculous in cost to get done all in all

Spoiler Light - it says PUT-SB-001 on it, 4 screws... approx 20"
It's 19.9 inches.. so 20 inches i guess
its got 4 screws in it

i have a 95 max.
Old Jul 22, 2008 | 10:47 AM
  #2  
Torgus's Avatar
Banned
iTrader: (10)
 
Joined: Dec 2002
Posts: 4,202
From: Boston Baby!
ummm goto a yard...maximas are common enough...
Old Jul 22, 2008 | 06:08 PM
  #3  
Frank Fontaine's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 3,879
Are you looking for the OEM? I just had to get it to pass inspection. Listed for like $176 and I paid $121. All you have to do is go to your favorite Nissan dealer's website (that uses trademotion), click rear lamps, high mounted stop lamp, high mount lamp, and then the description is High mount lamp - Spoiler - Spoiler. I had an appt. and I had to pass the inspection so I did not do it myself, there were 3 screws and no clearance. I think they must have used a right angle allen key or something to get the old one out. New one looks good, all the leds are bright and uniform now. Don't bother with used, the lamps will be dim and some may have an appearance like they're burning out.
Old Jul 22, 2008 | 08:32 PM
  #4  
foreknowapparelworldwide
Guest
 
Posts: n/a
I think I found what you have
im seeing it listed for $143.88
so, what are the dimensions of your light? like mine has 4 screws and this has 3 so.. not sure
Old Jul 22, 2008 | 08:43 PM
  #5  
nafddur's Avatar
Member
 
Joined: Oct 2007
Posts: 292
The spoiler light assembly on my 95 SE also has 3 screws - and it's about 16 inches wide. I used a Chapman, Ratchet Offset Kit (#1316) to get the 3 screws out to repair my light assembly.

I (carefully) pried it apart, soldered in a new $.50 resistor from Radio Shack, glued the 2 light assembly halves back together, and was back in business.
Old Jul 24, 2008 | 09:38 AM
  #6  
Frank Fontaine's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 3,879
Since I wanted the inspection sticker, I paid 1 hour labor to have it installed....I just (can't believe it) found the tool I would have needed to remove it myself--it's a little ratchet with a screw bit, phillips one side, flat the other. Would be able to easily fit under the spoiler and above the trunk. It's in a tool kit at work. DOH!! To the OP I paid $120 free ship no tax OEM. 175.95 list
Old Jul 24, 2008 | 10:06 AM
  #7  
foreknowapparelworldwide
Guest
 
Posts: n/a
Yeah, It's looking like I may try this. Take it apart and have a look. Because I can't find this Spoiler Light anywhere at all. Seems all too rare. Pisses me off lol why can't I just have one thats the same as just about everyone else's. It's making me what to buy a whole new spoiler but then I'd have to get it painted to match my maxima which all in all will cost probably $270-$350 which isn't worth it to me. I may just leave it how it is if I can't figure out how to fix it myself or find another replacement light.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
doctorpullit
8th Generation Maxima (2016-)
37
Apr 5, 2017 12:59 PM
4doorGTR
7th Generation Maxima (2009-2015)
13
Sep 11, 2015 04:09 PM
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM
umnitza
Group Deals / Sponsors Forum
0
Sep 1, 2015 01:03 PM
cstrasz
8th Generation Maxima (2016-)
3
Aug 27, 2015 08:07 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:52 AM.