General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

G-Force ecu or VB mod???

Old Feb 27, 2002 | 05:33 AM
  #1  
BLacKMax69's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2000
Posts: 330
G-Force ecu or VB mod???

whats better for the money(hp and times off 1\4) and well-being of my 95 maxima... this ecu upgrade...or vb mod
....????
Old Feb 27, 2002 | 05:40 AM
  #2  
Sprint's Avatar
Administrator
iTrader: (10)
 
Joined: Feb 2001
Posts: 26,943
tranny swap
Old Feb 27, 2002 | 05:45 AM
  #3  
Craig Mack's Avatar
All YOUR grammer belong to me
 
Joined: Jul 2001
Posts: 7,400
Originally posted by SprintMax
tranny swap
Even though that wasn't his question, I have to agree. 5-speed Maxima's are in a whole different ballpark than auto's.

Many people didn't see any time taken off their 1/4th with the VB mod. The ECU will give nice gains but is way too $$ for them IMHO. I know it is more than a superchip but they give the same/more gains. too bad we don't have a simple chip like that for the Maxima..
Old Feb 27, 2002 | 06:02 AM
  #4  
BLacKMax69's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2000
Posts: 330
the g-force is going for 460-500 depemding if there are anymore people...the vb is 450 but i will suffer downtime...with the ecu upgrade i will not because i have an extra ecu...but i want to know which one is better for the car with the most +'s.??? need some opinons?
Old Feb 27, 2002 | 06:13 AM
  #5  
Sprint's Avatar
Administrator
iTrader: (10)
 
Joined: Feb 2001
Posts: 26,943
they are both relative.. they both will give varying results.. the VB has taken of .4 for some and .1 for others.. its all relative.. personally i would buy the VB Mod .. why? because its the only one out there and i am not going to buy a product where their is a better one out there
Old Feb 27, 2002 | 07:09 AM
  #6  
mattattax's Avatar
Senior Member
 
Joined: Sep 2001
Posts: 1,575
I'm gonna assume you bought an auto for an amalgam of reasons and just say go with the vb mod. If you realize you don't know why you bought an auto, go with a tranny swap, depending on the price. But don't go into getting a vb mod thinking it will give you a "manual tranny experience" b/c it won't (I can't stand it when people get the mod just b/c they think that). It is however well worth the $$ and increases the life of the tranny. If you HAFTA have an auto like me, go with the vb mod.
Old Feb 27, 2002 | 07:14 AM
  #7  
global_threat's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2000
Posts: 1,740
From: Taylor County, Texas
Originally posted by mattattax
go with the vb mod.
Old Feb 27, 2002 | 08:06 AM
  #8  
Kashoggio's Avatar
Senior Member
iTrader: (11)
 
Joined: Nov 2000
Posts: 4,049
Originally posted by SprintMax
tranny swap
Old Feb 27, 2002 | 08:23 AM
  #9  
BlkCat
Guest
 
Posts: n/a
Go for the VB mod.
Old Feb 27, 2002 | 11:28 AM
  #10  
Chebosto's Avatar
RIceD OuT moDErAtor
iTrader: (1)
 
Joined: Aug 2000
Posts: 3,146
ECU: Gains fuel efficeincy, Gains Torque AND HP throughout the midrange, the MAX hp gain is like 5hp, but the most hp gained is in the midrange after 3500 rpms... works with ALL cars, modded or non modded. works even BETTER with higher octane/octane booster Cost is $450-500, depending on the amount of people that will buy it...
Trust me. this thing is by far the easiest mod ever. you dont have to do anything. just send in your ecu. it gets chipped. it gets sent back. the gains will actually get better as the ecu relearns your mods on the car.


VB: prolongs the life of your Auto. if your tranny is already toast. this wont help a bit. good for people who drive their autos as if it was a stick. Its a little pricey for just getting rid of the luxury pause when shifting. But again. it will help you prolong the life of the tranny. it might not make you any faster persay, compared to a torque converter, but.. hey. you autos need all the help you can get.. this is a long process. around 3-4 hours and its hella messy. i've installed about 5 vb's and everyone of them i got my clothes a little stained with tranny fluid and i got my driveway coated too. just besure you know what you're doing. there's 13 screws on the VB, and around 28 on the tranny pan. your arm will hurt. guaranteed


--Cheston
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gigabyte
8th Generation Maxima (2016-)
8
Jan 6, 2017 06:05 PM
BLACKKILA.GTR
5th Generation Classifieds (2000-2003)
1
Sep 29, 2015 11:23 AM
REDinLV
New Member Introductions
1
Sep 28, 2015 12:31 AM
hez8813
5th Generation Maxima (2000-2003)
0
Sep 27, 2015 08:37 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:34 AM.