bmfjeep

The bill of lading pouch should have installation instructions inside it. If not they are on our website.

If it is a gen 3 Maxima we send an extra couple of bolts and nuts in case you have to drill out the old ones in the cat.


We'll be posting sometime later today the order in which we'll be shipping the Y pipes when we get our flex sections in. First name initial and last name as well as which pipe you ordered, if you see a mistake email me: dallas@warpspeedperformance.com

The only people who will get theirs out of order are active military.

If you call to check we'll put you at the end of the list.

We have 110+ sets of tubing ready to assemble but are awaiting a delivery of flex sections, all other parts are here.

If needed we'll do another Y pipe group buy late this month. We'll be shipping 10-15 sets a day until complete when the flex sections get here.

We appreciate the popularity of our Y pipes but did not anticipate the volume, thanks again for your patience. I don't do patience well myself.

regards
Dallas

XIMA96SE

NOPE !!!!!!!!! CALL WARPSPEED. I got in after the GD was over

MaximaEvolution

iTrader: (2)

I have a 4th Gen and it came with 2 bolts....These are for the cat?

bmfjeep

I'll have a talk with my nephew Sean, he usually gets it right.

You should not need to replace any bolts when installing your Y pipe unless you break off a stud on the cat.

regards
Dallas

bmfjeep

We'll begin shipping Y pipes again on Monday at the rate of 10-15 per day, it will only take about a week to finish shipments. There are only about 6 or 7 people we need to get payment info from yet and these we will call. We'll be going pretty much by the list.

regards
Dallas

Intel

iTrader: (2)

Want to thank you again Dallas. Bought my Y-pipe for my third gen and now getting one for my 4th gen. Any chance of getting that list of who gets them first... if you aren't too busy

djPlayboy

mine finaly came in yesterday, woo hoo, time to install tommorow

Guinader

iTrader: (1)

Hey bmfJeep is this true about this new flex, if yes, do you still have any left, and can I get one? do I have to call it?

thanks
Guilherme Z A

image

iTrader: (6)

So we need to call for the new flex??? Is this a fact? Whats the number?

MaxInProgress

iTrader: (2)

OK im getting really anxious here, i sent 160$$ to bmfjeep@yahoo.com on the 20th of february, tahts 2 fridays ago, and i still have nothing, no word on anything...........i wanna know if anyone else who sent to this paypal account got their pipes? I somehow feel cheated..........god i want my y pipe...

MaxInProgress

iTrader: (2)

Ignore the post above, i am an idiot..........

jimkim2004

You know you can edit your previous post...

fearthegecko

no arguments here.................

sadice

iTrader: (1)

......

pfactor172

end of the list

aznprid972

iTrader: (26)

any word on the shipping status?? i paid for it like 2 weeks ago and the nice lady told me it'll come in early next week. well.. that week went by and still no signs of it coming in i know shipping will start monday but i thought there was a list of the order being shipped posted sometime soon. i know you guys are busy working so hard to get this order though but it'll be nice if you guys can reinsure us that things are on its way.

BlueC

iTrader: (5)

I heard that they are shipping a bunch out next week. They had to order more flex sections, and those come in monday. Don't worry, you'll get it.

krzymax

iTrader: (2)

omg. everybody just chill. you'll get it when you get it. gosh...

KEhrhardt

Crap! I always miss these things! When is the next GP going to begin? Maybe if I call WarpSpeed they could add my order to the GP... I need an O2 sensor too.

99maxx-on19's

just wait i want my pipe already but theres nothing i can do i called last week and was told i was on the list and new pipes were under construction so just wait i have to

DoGGy

i just want a track#. i dont care when they ship it out. all i wanna do is to be able to tell what day its gonna get here

image

iTrader: (6)

I kinda need a tracking #.. my parents don't know about this. I need to get to the mail before they do. If they see this big *** package at the door they will scream at me for spending all my money on my car. blah blah a tracking # would be great, or an estimated arrival. I need a heads up.

Pasty

They'll give the numbers when they ship them out.

budha56

Yeah FedEx doesn't even generate tracking numbers until they ship.

ShRapNeR

iTrader: (1)

haha... my parents are the exact same way.. they tell me not to spend any more money on my car, I never listen and they always get over it.

all i have to do is tell them a good reason it actually helps the car..

d1max2nv

iTrader: (5)

hahah i use somewhat of the same excuses, my pepz are always saying "your taking a good car and distroying it, its never going to run the same... your going to be sorry" then i say ok fine ill take it off and send it back ,and after about a week, they would forget about it.

chris'smax

iTrader: (3)

Man I thought my parents were the only ones like this. After I came home with bodykit on my car they pretty much just gave up.

image

iTrader: (6)

haha. the sad thing is i owe them $350 for a wreck and Im buying mods isntead of paying them. Maybe that's why they get so ****ed? Oh well, I will pay it in the summer.

Guinader

iTrader: (1)

Whre can we get the O2 sensor remover, (the tool) where can we buy on, or is there any type of wrench that vcan be used to remove the O2?

BTW, I own my parents $1100 from when I bought my car, and they complain all the time about it. To pay my debt, and form buying mods for my car... they complain all the time, I'm already starting to agree with them. But I will never stop modding my maxima TILL THE END!!!

Matt93SE

iTrader: (44)

on the 3rd gens, you can just use a 17mm wrench on the O2 sensor.. I've never had one stuck on me, but I've heard horror storied of others that have.

chicago max98

iTrader: (6)

where is the new list

Brudaddy

iTrader: (2)

You can just use a crescent wrench (small one) to get the O2 sensors out. I did it yesterday. Not too difficult. Just be sure to be careful and not damage the sensors....they are expensive for how small they are.

DoGGy

still waitin for track # :rolleye:

aznprid972

iTrader: (26)

as posted above... shipping started again monday so hopefully ill get mine sent soon this week; if im lucky. what could be more fun for my spring break to have the y-pipe in to enjoy.

Sniper

Women. Women could be more fun...

djPlayboy

got mine last week installed it sunday the car def pulls alot harder now, i love it

PearlWhtMaX2000

iTrader: (5)

i got my tracking # already andmin should be here tomorrow

OneToughMax

i got a call from lynn yesterday, and she told me that they were going to ship today. this morning, i got an email from dallas, with my fedex tracking number. do you know what this means?

MY Y-PIPE IS ON THE WAY!!!

chicago max98

iTrader: (6)

check cleared my bank today but still no tracking number

MaximaPower

iTrader: (3)

haven't received emial or phone call...and i paid thru paypal on the 17th

i just hope i get it by next week so i can install it during spring break