dantech

iTrader: (3)

Yes you did. I asked back if you knew which model Maxima you had. I can tell by the VIN if you have it handy. You can contact me at shiftparts@gmail.com. Thanks

dantech

iTrader: (3)

There is a upper body (31711-85X00) and a lower body (31713-85X00). You can do a factory number search for that here: http://www.trademotion.com/partlocat...24&catalogid=0

dantech

iTrader: (3)

Normally when your doing a clutch service, you should replace the disc, the pressure plate, and the release bearing. You can find all of those here: http://www.trademotion.com/partlocat...98&catalogid=1
Hope this helps.

Snolife

iTrader: (2)

No I thought you were gonna give me the part number? Or am I confused?

JiggsHall

I've had a power steering hose leak for a while, I had someone turning the wheel while the car was running but I can't tell directly where it is coming from, and it's not leaking directly from the resourvoir. The fluid that leaked out is mostly on the frame under the radiator. I don't believe I would need the whole hose assembly. Do you have a part number and a price for the two hoses that run in front of the radiator ?

dantech

iTrader: (3)

To add the frame to your cart, its part number "frame". Do you need the other number also?

dantech

iTrader: (3)

The picture here is showing the cooler portion of the ps hose. You can get this entire hose asm or you can get the peices that have there own number. Hope this helps.

Snolife

iTrader: (2)

Oh ok, I will do it tonight when I get home from work. Just make sure that I get the "Altima" frame. I will pm you the order number if you need it after I place my order, thanks again.

JiggsHall

Dan,

How much are 49725MC and 49725 MD ?

kevdog

hey dan i need a canister purge control valve i cant find one anywere its for a 95 maxima.

NOCturnalI30

iTrader: (1)

I mean the transmition VB for a 2000 I30 im not sure what i am seeing with those part numbers

dantech

iTrader: (3)

I get all of the internet orders and I'll make sure you get the Altima Frame. Just also mention it in the comment area of your order when you place it. Thanks.

dantech

iTrader: (3)

Those are number 49725-58U03 and 49725-58U04. You can do a factory number search for those here: http://www.trademotion.com/partlocat...24&catalogid=0

The look about $14 each.

dantech

iTrader: (3)

Is that the one located right on top of the canister? If so, you'll need to get the entire canister. You can find that here: http://www.trademotion.com/partlocat...95&catalogid=1

dantech

iTrader: (3)

Thats them. There is a upper and a lower. Heres some pics to help.

Spaniard

iTrader: (1)

Im afraid I have some potentially annoying questions.

Ive heard that the bumpers for a 95 maxima are like 25 lbs lighter, front only!!!! (vs 96)
Can you comment on this, and if true, can let me know what I would have to buy to get the benefits of the weight reduction? If its true, and I can get 50 lbs reduction I'd be into front and rear... From what Ive heard filling with foam would be lighter than buying all the bumper parts.

Sorry to be so uninformed, your help would be majorly appreciated and you would have a fan for life.

Also, I probably need some MEVI replacement parts. Is this something you can do?

aminus21

iTrader: (14)

I need the rubber thingy here




And the two hoses here.



Do you have part numbers?? Also, theses part numbers dont work on your website for the parts required to change exhaust studs.
http://www.4dsc.com/articles/drivetr...ld_studs.shtml
Do I need to call in??
thnx

NYR1199

iTrader: (4)

I'm lookin to order new pads and rotors front and back for my 95. When ordering, do I need to order 2 front brake pads or just 1? I assume the rotors come as each so I would need to order 2 fronts and 2 backs.

Army of Maxima

iTrader: (1)

dantech... it doesn't matter which model I have... I have a 2000 GLE that I am putting 2002/2003 tail lights on... the harness from the 2000 does not fit in the 2002/2003 housing, so I need the wiring harnesses (2) for a 2002/2003 Maxima (all the same)...

I've done this before, and I had two price quotes... one at $75 and one at $73... I want to see what your price is?

??

dantech

iTrader: (3)

I havent actually heard that before but it does sounds like it would work. Makes sense that if you changed the bumper from steel to styrofoam you would decrease the overall vehicle weight. Id find someone who has done that before and see whats involved.

dantech

iTrader: (3)

The part numbers for the two hoses and the bumper are 65822-01M00, 14099-85E01, and 11826-85E10. All of the numbers that you have listed on that site are available also now. You can do a factory number search for all of those here: http://www.trademotion.com/partlocat...24&catalogid=0

dantech

iTrader: (3)

The pad kit is for both fronts and you only need to order one set. The rotors are each so you'll need to order two for the front. You can find those here: http://www.trademotion.com/partlocat...95&catalogid=1

Klutch

iTrader: (5)

Remember guys, free shipping is only until the 12th..

dantech

iTrader: (3)

Okay the year thing. There is a listing in my Nissan catalogs for 06/01 to 12/02. That part number is 26551-5Y700. The next listing is 01/03 up and that number is 26551-7Y000. Here are a few pics to help you see what Im talking about.

dantech

iTrader: (3)

Spaniard

iTrader: (1)

Thanks, I would appreciate it big time!!


Also, do you sell the MEVI parts separately?


(The "arm" thing sticks- I think the rubber gasket in it is faulty (too big) and so it doesnt spring back from open, and takes too long TO open.)

dantech

iTrader: (3)

Your gonna have to help me with "MEVI". Im not familiar with that term.

airness_81

anyone near by me michigan owner of maxima 4th generation know everthings on the car.Do u know any car show or maxima near in michigan.

HNDA ETR

iTrader: (10)

Hmmm... Nissan parts guy not knowing MEVI... scary...

M iddle
E astern
V ariable
I ntake

Spaniard

iTrader: (1)

Pardon the competitor's link-

http://www.courtesyparts.com/Merchan...duct_Code=MEVI

I need the little bronze part in the upper right.

EDIT: Actually, if you hold off on it I will get the part # for you, only fair.
Still interested in the lightweight bumpers for a 95-

Snolife

iTrader: (2)

Dan, just placed my order, the order number is #12418590. Let me know if anything is wrong, thank once again.

njmodi

iTrader: (4)

Dan - never mind - the tracking number works now... I still need to talk to you ASAP - I left a message with one of the parts guys... please call me ASAP.

aminus21

iTrader: (14)

Placed order.. Order number 12447210
Thank you for the part numbers

NYR1199

iTrader: (4)

Dan, I just placed the order for brake parts.
Order ID: 12445525

The shipping was $32.37 , I assume this gets refunded?

Snolife

iTrader: (2)

I was gonna ask the same exact question.

Army of Maxima

iTrader: (1)

dantech... that top photo? From a 2004/2005 Maxima (!!!)

the bottom photo... from a 5th gen... but I can't tell which one.

how much for the wiring harness (2 total) for a 2003 Maxima?

thanks!

Klutch

iTrader: (5)

I ordered the 2 harnesses for my 02 tails and they were $14.xx per side. I went ahead and ordered the turn signal bulbs while I was at it because they were $2 I think and that'll save me a trip to Autozone. I hope I ordered the right thing because I saw your earlier post about them being $75ish!!

I ordered THIS part #8

NashMax

Dantech:
I am looking for the nuts that hold the rear stabilizer bar up. There are two per side for the bushings and one per side at the link. How can I go about getting these?

Ka$hThaRipper

iTrader: (15)

Hey Dan, I just made an order, I think i beat the deadline (it's still 6/12/05)

time now: 11:50 pm eastern

dantech

iTrader: (3)

That'd be great if you can get me a part number. I show a few different engines in my parts catalog but nothing listed as MEVI. Is that a factory option or is it an upgrade from a nother source?