Group Deal: KYB AGX & GR-2 Shock Absorbers, Mounts and Boots
I picked up fronts and rears for my 2002 se and wanted to give them a real drive to make sure this was a quality deal.
Well I went on the ortega hwy in california near Lake Elisnore last weekend and -wow- my traction was spot on. A touch of braking fade (power slot front/oe blanks rear and the PBR deluxe plus all the way around) but stopping power was -wow- But I did not go all out, just a little spirted.
Everyone pick up a set from Jeff.
Well I went on the ortega hwy in california near Lake Elisnore last weekend and -wow- my traction was spot on. A touch of braking fade (power slot front/oe blanks rear and the PBR deluxe plus all the way around) but stopping power was -wow- But I did not go all out, just a little spirted.
Everyone pick up a set from Jeff.
Originally Posted by RR5
I picked up fronts and rears for my 2002 se and wanted to give them a real drive to make sure this was a quality deal.
Well I went on the ortega hwy in california near Lake Elisnore last weekend and -wow- my traction was spot on. A touch of braking fade (power slot front/oe blanks rear and the PBR deluxe plus all the way around) but stopping power was -wow- But I did not go all out, just a little spirted.
Everyone pick up a set from Jeff.
Well I went on the ortega hwy in california near Lake Elisnore last weekend and -wow- my traction was spot on. A touch of braking fade (power slot front/oe blanks rear and the PBR deluxe plus all the way around) but stopping power was -wow- But I did not go all out, just a little spirted.
Everyone pick up a set from Jeff.
Thanks again and best regards!

Jeff
Hello!
planning on purchasing, but i have a few qeustions:
Gr2 for 3rd gen max:
# 235052, 235051, 365079(x2)
i am assuming i need the mounts too??, so that would be
# SM5102(x2), SM5100, SM5099
now aobut bearings?
#SM5064(x2)
and its a thrust bearing? how do i knoe if i need 'em or not?
and bootts?
can i use any strut boots? or do they have to be yours?
cause i have acess to loads of rancho off road, and other land rover ones.
also i would like the eibach 1.2" drop springs(x4)
do i need any bumpstops or can i use tthe stock ones?
also do you have Energy Suspension bushings??
becuase i also want the parallel bushings. courtesy nissan has em for lik $40 shipped. just wondering if you had em so i could just order eveythin from you.
thats it.
i hope
so whats a quote to 01746, or 05061 which evers cheaper.
also are these shocks under warrenty. iv heard a few stories aobut KYB 'blowing' while on the lowered eibachs.
thanks a bunch Jeff!!
-andy
planning on purchasing, but i have a few qeustions:
Gr2 for 3rd gen max:
# 235052, 235051, 365079(x2)
i am assuming i need the mounts too??, so that would be
# SM5102(x2), SM5100, SM5099
now aobut bearings?
#SM5064(x2)
and its a thrust bearing? how do i knoe if i need 'em or not?
and bootts?
can i use any strut boots? or do they have to be yours?
cause i have acess to loads of rancho off road, and other land rover ones.
also i would like the eibach 1.2" drop springs(x4)
do i need any bumpstops or can i use tthe stock ones?
also do you have Energy Suspension bushings??
becuase i also want the parallel bushings. courtesy nissan has em for lik $40 shipped. just wondering if you had em so i could just order eveythin from you.
thats it.
i hope
so whats a quote to 01746, or 05061 which evers cheaper.
also are these shocks under warrenty. iv heard a few stories aobut KYB 'blowing' while on the lowered eibachs.
thanks a bunch Jeff!!
-andy
Originally Posted by andy044
Hello!
planning on purchasing, but i have a few qeustions:
Gr2 for 3rd gen max:
# 235052, 235051, 365079(x2)
i am assuming i need the mounts too??, so that would be
# SM5102(x2), SM5100, SM5099
now aobut bearings?
#SM5064(x2)
and its a thrust bearing? how do i knoe if i need 'em or not?
and bootts?
can i use any strut boots? or do they have to be yours?
cause i have acess to loads of rancho off road, and other land rover ones.
also i would like the eibach 1.2" drop springs(x4)
do i need any bumpstops or can i use tthe stock ones?
also do you have Energy Suspension bushings??
becuase i also want the parallel bushings. courtesy nissan has em for lik $40 shipped. just wondering if you had em so i could just order eveythin from you.
thats it.
i hope
so whats a quote to 01746, or 05061 which evers cheaper.
also are these shocks under warrenty. iv heard a few stories aobut KYB 'blowing' while on the lowered eibachs.
thanks a bunch Jeff!!
-andy
planning on purchasing, but i have a few qeustions:
Gr2 for 3rd gen max:
# 235052, 235051, 365079(x2)
i am assuming i need the mounts too??, so that would be
# SM5102(x2), SM5100, SM5099
now aobut bearings?
#SM5064(x2)
and its a thrust bearing? how do i knoe if i need 'em or not?
and bootts?
can i use any strut boots? or do they have to be yours?
cause i have acess to loads of rancho off road, and other land rover ones.
also i would like the eibach 1.2" drop springs(x4)
do i need any bumpstops or can i use tthe stock ones?
also do you have Energy Suspension bushings??
becuase i also want the parallel bushings. courtesy nissan has em for lik $40 shipped. just wondering if you had em so i could just order eveythin from you.
thats it.
i hope
so whats a quote to 01746, or 05061 which evers cheaper.
also are these shocks under warrenty. iv heard a few stories aobut KYB 'blowing' while on the lowered eibachs.
thanks a bunch Jeff!!
-andy
I would get the folowing parts:
# 235052, 235051, 365079(x2)
i am assuming i need the mounts too??, - Yes, get them!
# SM5102(x2), SM5100, SM5099
#SM5064(x2) - yes get the bearings your car is over 10 years old, so they probably need done.
The Eibachs would be good, and as long as you dont lower the car more than 1.5" the KYBs will still have the lifetime warranty.
The shocks and springs are sold with free shipping and I can throw all that other stuff in at no additional shipping charges.
Can you give me the part # for the energy suspension? We should be able to do that price, then you can get it all from us.
Let me know and I'l try and get you the total.
Thanks again,
Jeff
Originally Posted by andy044
#7.3117 and they call them "lateral links". that should be both sets for both sides. so a total of 16 bushings and 8 sleeves.
what about my question about the shock boots. and the bumpstops
thanks
what about my question about the shock boots. and the bumpstops
thanks
Thanks again,
Jeff
Originally Posted by andy044
thanks for looking!
screw it, if im going to do it might as well do it right!
and i dont want these shocks to pit and go bad. so yeah boots too.
so, quote?
screw it, if im going to do it might as well do it right!
and i dont want these shocks to pit and go bad. so yeah boots too.
so, quote?
Part #'s 235052, 235051, and 365079 (x2)
Maxima.org Discounted Price: $220w/ FREE shipping!!
*89-94 Maxima*
Front Mount - SM5102 - $42 each
Front Mount Bearing - SM5064 - $17 each
Right Rear Mount - SM5100 - $47 each
Left Rear Mount - SM5099 - $47 each
Front Boot - SB103 - $12 each
Rear Boot - SB101 - $12 each
Eibach Pro-Kit Springs
1989-1994 Nissan Maxima
Lowers Front: 1.2 in
Lowers Rear: 1.2 in
Part number: 6311.14
Maxima.org price: $235 w/ FREE SHIPPING!!
Even though I didnt price the mounts/boots/bearings with free shipping I'll just throw them in at no additional charge. So the grand total would be $715 for the whole ball of wax. I didnt miss anything, did I? All of this is in stock here and can be shipped, as soon as we have the money

Thanks again!
-Jeff
Originally Posted by 69CHARGER_RT
Great stuff Jeff
Thanks again.....will be ordering some rotors & pads in the near future as well!
Thanks again.....will be ordering some rotors & pads in the near future as well!
Thanks again,
Jeff
Originally Posted by andy044
included in that 715$ quote you gave me earlier?
im trying to get the money all gattherd up. so i should order by end of this week.
thanks bro
im trying to get the money all gattherd up. so i should order by end of this week.
thanks bro

Thanks again,
Jeff
Originally Posted by Dasyce
I'll take a set of 2 front (SB103) & 2 rear (SB108) KYB boots for my 97. PM me shipped price to 11004 please, and I will send a paypal payment.
Thanks again,
Jeff
Originally Posted by rypace
Great price, they shipped fast, but the boot(SB103) doesn't seem to fit my 95 max.
Thanks,
Jeff
Originally Posted by andy044
receieved struts/bearings/boots/mounts today!!! 
springs came last week!
jeff i think i love you!!!
but i didnt get any horsepower boosting KYB stickers
-andy

springs came last week!
jeff i think i love you!!!
but i didnt get any horsepower boosting KYB stickers

-andy
I'll see if I can get KYB to send 2 of the 5 HP gaining stickers and 2 of the 10 HP gaining stickers. Let me know how that sounds

Thanks man,
Jeff
Originally Posted by importrp
Bump for a great deal thats still going on!
set of shocks/springs on the way... need all the mounting hardware as I know my stuff is shot (front shock tower top is squeaking over bumps/turns). 1997 Maxima SE. Thanks!
Kaz
Originally Posted by KaZ
Could I get a full mount/boot quote F&R? I've got a set of lightly abused, I mean used
set of shocks/springs on the way... need all the mounting hardware as I know my stuff is shot (front shock tower top is squeaking over bumps/turns). 1997 Maxima SE.
Thanks!
Kaz
set of shocks/springs on the way... need all the mounting hardware as I know my stuff is shot (front shock tower top is squeaking over bumps/turns). 1997 Maxima SE. Thanks!
Kaz
Front Mount - SM5324 - $28 each
Front Mount Bearing - SM5323 - $12 each
Rear Mount Kit - SM5123 - $5 each
Front Boot - SB103 - $12 each
Rear Boot - SB108 - $12 each
+ $9 shipping
So the total would be 147 shipped!
Thanks,
Jeff
Originally Posted by importrp
*95-99 Maxima*
Front Mount - SM5324 - $28 each
Front Mount Bearing - SM5323 - $12 each
Rear Mount Kit - SM5123 - $5 each
Front Boot - SB103 - $12 each
Rear Boot - SB108 - $12 each
+ $9 shipping
So the total would be 147 shipped!
Thanks,
Jeff
Front Mount - SM5324 - $28 each
Front Mount Bearing - SM5323 - $12 each
Rear Mount Kit - SM5123 - $5 each
Front Boot - SB103 - $12 each
Rear Boot - SB108 - $12 each
+ $9 shipping
So the total would be 147 shipped!
Thanks,
Jeff
Originally Posted by BlackMaxima21
do you have the agx modified struts for 2000 maxima like the ones on cattman?
Thanks for checking,
Jeff
Originally Posted by importrp
NP, shipped last Friday!
Best Regards,
Jeff
Best Regards,
Jeff
Thanks Jeff



