99 I30 fog lights
#1
99 I30 fog lights
Does anyone have any instruction on how to change the fog light bulbs on a 99 ? Do you have to take the whole light housing out? Do the corner light housings have to come out too?
#2
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
You remove the far, corner, platic splash gaurd under the bumper, It 2 10mm bolts and one screw I believe. Then you can gain access to the rear of the housing. A small wire clamp holds the bulb in the housing. Some needle nosed plyers will work to release the clamp. Just squeese it together and it should release. It is a PITA, just work with it. The new bulb just plugs in and the clamp goes back and your done. The fog light bulbs are 55W H3 incase you needed to know.
Mike D
Mike D
#4
Originally posted by I30tMikeD
You remove the far, corner, platic splash gaurd under the bumper, It 2 10mm bolts and one screw I believe. Then you can gain access to the rear of the housing. A small wire clamp holds the bulb in the housing. Some needle nosed plyers will work to release the clamp. Just squeese it together and it should release. It is a PITA, just work with it. The new bulb just plugs in and the clamp goes back and your done. The fog light bulbs are 55W H3 incase you needed to know.
Mike D
You remove the far, corner, platic splash gaurd under the bumper, It 2 10mm bolts and one screw I believe. Then you can gain access to the rear of the housing. A small wire clamp holds the bulb in the housing. Some needle nosed plyers will work to release the clamp. Just squeese it together and it should release. It is a PITA, just work with it. The new bulb just plugs in and the clamp goes back and your done. The fog light bulbs are 55W H3 incase you needed to know.
Mike D
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
Maxima30
5th Generation Maxima (2000-2003)
2
09-07-2015 06:13 PM