Power loss after Cai install
#1
Power loss after Cai install
2000 i30
I installed an Injen air intake and am having serious power loss issues. I'm not sure what it could be. I am getting code p0171 and it idles poorly. Bogs down during acceleration also. I'm not sure if there could be a vacuum leak, tho I don't hear any hissing. The fit wasn't great for this setup and I cut the pipe shorter.
I unplugged the maf while idling and it died, I thought it was supposed to stay running. When stopped it idles better in neutral then in drive holding the brake pedal. I reset the code and it didn't come back yet. But drivability is ****.
Not sure if matters but I had to buy the hoses from Napa. The 16mm long hose is heater hose because no one has a vacuum hose that big.
I installed an Injen air intake and am having serious power loss issues. I'm not sure what it could be. I am getting code p0171 and it idles poorly. Bogs down during acceleration also. I'm not sure if there could be a vacuum leak, tho I don't hear any hissing. The fit wasn't great for this setup and I cut the pipe shorter.
I unplugged the maf while idling and it died, I thought it was supposed to stay running. When stopped it idles better in neutral then in drive holding the brake pedal. I reset the code and it didn't come back yet. But drivability is ****.
Not sure if matters but I had to buy the hoses from Napa. The 16mm long hose is heater hose because no one has a vacuum hose that big.
Last edited by tonymcclellan; 07-25-2018 at 10:57 PM.
#2
have you tried re installing the OEM airbox? if it still does it with the OEM airbox you forgot a hose or the MAF is having issues, if its fixed then theres something with the CAI install. Nissan MAF are very sensitive
Thread
Thread Starter
Forum
Replies
Last Post
herash1910
4th Generation Maxima (1995-1999)
29
05-02-2015 11:17 AM
hott_nikkelzz
4th Generation Maxima (1995-1999)
5
05-14-2004 08:33 AM
97MaxGurl
4th Generation Maxima (1995-1999)
23
08-03-2002 09:24 PM