i have a 2k2 non-bose maxima and im installing 6.5" components. i need to install the crossovers too. does my non-bose maxima have crossovers and if it does where are they? if not, how would i wire the crossovers to the speakers?

 

You connect the wires from the deck to the crossover box, then you connect the tweeter and 6 1/2 to the croosover box. i intalled my front croossover boxes in the kick panel.

ohh yea i dont think a non bose comes stock with crossovers.

 

can i install them in the doorpanel? and which wires from the aftermarket h/u im gonna install?

 

it depends how big your crooss over box is. I installed my infinity x-over for the rear speakers inside the door with double sided tape.




+/- wire for the speaker

 

so do i have to have my h/u installed 1st or can i install the speakers 1st?

 

if you are using your stock wires it doesnt matter. if you going to amp your speakers with a separate amp, its better to install your head unit first.

 

where do i find the wires for the tweeters and 6.5's? because i do not see any wires from the tweeters or the speakers?

 

1. Take your door apart.
2. take out the speaker
3. cut the wire going into the speaker
4. connect x over to that wire
5. connect the speaker/ tweeter to the x-over

 

im going to do this right now. so just to make sure.. i put the wires from the woofers into the xover, then i take the wire from the tweeter and put it in the xover also. but how does that all connect to the radio?

 

Slick, don't forget to take some pics for the rest of us

I'm waiting for my amp & PAC AOEM-NIS2 Bose line converter...

G