4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

people with KYB strut mounts... need your opinion....

Thread Tools
 
Search this Thread
 
Old May 14, 2004 | 01:08 PM
  #1  
happyricefob's Avatar
Thread Starter
V^___^V
iTrader: (7)
 
Joined: Aug 2002
Posts: 6,400
From: Fremont, CA
people with KYB strut mounts... need your opinion....

so my rear tokico HP shocks blew out. i picked up some rear kyb agx + kyb strut mounts.

okie basically this is not really a big issue, i'm just curious why maxmod says kyb strut mounts aren't good replacement. i need some personal opinion on that.
Old May 14, 2004 | 01:31 PM
  #2  
happyricefob's Avatar
Thread Starter
V^___^V
iTrader: (7)
 
Joined: Aug 2002
Posts: 6,400
From: Fremont, CA
bump...no one can help me?
Old May 14, 2004 | 02:29 PM
  #3  
drewm's Avatar
Senior Member
 
Joined: Oct 2000
Posts: 1,390
I never knew KYB made rear strut mounts, only front ones. I hear the front ones basically act like broken stock ones, from every single person who owned them.

Then again, why get new rear ones? they shouldn't wear out, they are just a big hunk of metal with a little rubber ring. You sure you aren't referring to the KYB dust boots?
Old May 14, 2004 | 02:32 PM
  #4  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Ya, no need to change the rear OEM mount unless you replace it with a Motivational Mount style mount(1in more travel space).
Old May 14, 2004 | 05:15 PM
  #5  
UTIMaxima's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2002
Posts: 659
I've had no problems with mine. Just use a small amount of grease so they don't make noise. But you probably are fine staying with the oem ones.
Old May 14, 2004 | 05:40 PM
  #6  
maximus_pr's Avatar
Senior Member
iTrader: (3)
 
Joined: Sep 2003
Posts: 1,065
From: Florida
some people have issues with noise in front using kyb mounts only thing i may think is rubber in mount being softer than oems as for rears if you buy the kyb rear mounts you only get the bushings that goes on shaft of strut thats the only thing that wears out



another thing unless your front mounts are very very bad like rubber broken or anything like that just buy the oem strut bearing
Old May 14, 2004 | 05:59 PM
  #7  
VQuick's Avatar
Chassis Freak
iTrader: (17)
 
Joined: Apr 2002
Posts: 4,581
From: Portland, Ore.
Tangential question:

The Motivational mounts seem like a must for anyone who's lowering. 1" more travel, great. But does that mean the entire car can dip 1" lower? Would that mean you're more likely to scrape going over a big bump?
Old May 14, 2004 | 06:33 PM
  #8  
maximus_pr's Avatar
Senior Member
iTrader: (3)
 
Joined: Sep 2003
Posts: 1,065
From: Florida
no the Motivational mounts dont drop your car 1" more it gives you 1" more travel thats means your shock wont bottom out or bottom out less
Old May 14, 2004 | 06:46 PM
  #9  
VQuick's Avatar
Chassis Freak
iTrader: (17)
 
Joined: Apr 2002
Posts: 4,581
From: Portland, Ore.
I know it doesn't drop it 1", my question is, is the additional inch of travel at the bottom, meaning the car can go 1" lower even though it sits at the same height?
Old May 14, 2004 | 07:05 PM
  #10  
maximus_pr's Avatar
Senior Member
iTrader: (3)
 
Joined: Sep 2003
Posts: 1,065
From: Florida
yeap !!!!!
Old May 14, 2004 | 10:15 PM
  #11  
Oblongshapes's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 989
Originally Posted by UTIMaxima
I've had no problems with mine. Just use a small amount of grease so they don't make noise. But you probably are fine staying with the oem ones.
Is that the noise i got with my KYB AGX's i just installed, like little birdies singing their hearts out in the rear of your car?
Grease them eh? Does this mean i have to take the strut off again after i just got aligned :*(...

firestone will hate the day they gave me a lifetime alignment..

on a side note... i bought Eibach camber bolts when i redid my suspension, and the camber rating is the same before the alignment as it was after. I told them they were on there, but they didnt touch them. The left read -1.6 and the right -.02. Im going to go make them fix it !
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MaxLvr21
5th Generation Maxima (2000-2003)
14
Oct 17, 2015 12:11 PM
maxima-junky
4th Generation Classifieds (1995-1999)
1
Oct 7, 2015 06:13 PM
BobTX10
8th Generation Maxima (2016-)
14
Oct 7, 2015 08:43 AM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM




All times are GMT -7. The time now is 10:41 AM.