4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

hesitation during acceleration

Thread Tools
 
Search this Thread
 
Old May 2, 2005 | 05:24 PM
  #1  
maximazation's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (11)
 
Joined: May 2004
Posts: 1,882
From: Sunnyvale, CA
hesitation during acceleration

everytime i accelerate from a stop, i will experience a "miss" or hesitation at around 2-3K rpm, but when going WOT throttle or just idling, i dont experience any hesitation of any kind. i am throwing no codes and all my maintenence is up to date and no other major problems besides the hesitation. any help would be great. thanks.
Old May 2, 2005 | 05:58 PM
  #2  
Loe max's Avatar
Senior Member
iTrader: (6)
 
Joined: Dec 2000
Posts: 4,269
From: sarasota FL
Check your KS and see if its cracked in half.
Old May 2, 2005 | 06:05 PM
  #3  
MidniteMaxSE's Avatar
Senior Member
iTrader: (20)
 
Joined: Oct 2004
Posts: 495
From: NYC
most likely knock sensor...i gotta change mine tooo
Old May 2, 2005 | 06:07 PM
  #4  
slammed's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2004
Posts: 760
From: Gotham City, NY
if the KS is faulty....wont the check engine light come on?

Also checked my codes 3 weeks ago......no sign of faulty KS


the car feels a little sluggish...could it be that my KS is going?
Old May 2, 2005 | 06:14 PM
  #5  
CystumMax's Avatar
Well I should wrap this up before I start to ramble.
 
Joined: Feb 2003
Posts: 1,830
Do you have a Intake in your car?
Old May 2, 2005 | 06:18 PM
  #6  
97MaximaSE's Avatar
Senior Member
 
Joined: Aug 2000
Posts: 708
i had the same problem for 2 years....turned out to be my wiring harness. i replaced every sensor under the sun and nothing helped. eventually the wiring harness got so bad that it started stalling. good luck
Old May 2, 2005 | 07:26 PM
  #7  
Loe max's Avatar
Senior Member
iTrader: (6)
 
Joined: Dec 2000
Posts: 4,269
From: sarasota FL
Originally Posted by slammed
if the KS is faulty....wont the check engine light come on?

Also checked my codes 3 weeks ago......no sign of faulty KS


the car feels a little sluggish...could it be that my KS is going?
KS is a ghost code, which is a stored code that doesn't trigger a CEL light. You can have a cracked KS and still not get an 0304 code.
Old May 2, 2005 | 11:50 PM
  #8  
maximazation's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (11)
 
Joined: May 2004
Posts: 1,882
From: Sunnyvale, CA
my knock sensor is pretty new, it has maybe 6K miles on it

yes, i do have a intake, well...a cone filter w/ stock mid-pipe
Old May 3, 2005 | 06:04 AM
  #9  
dr-rjp's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2005
Posts: 1,607
From: Tampa, FL
Originally Posted by maximazation
everytime i accelerate from a stop, i will experience a "miss" or hesitation at around 2-3K rpm, but when going WOT throttle or just idling, i dont experience any hesitation of any kind. i am throwing no codes and all my maintenence is up to date and no other major problems besides the hesitation. any help would be great. thanks.
Do you have an automatic or manual transmission?

If you have an auto, then 2-3K is the range in which it upshifts during normal (gentle) acceleration. Does that "miss" or hesitation occur during an upshift?
Old May 3, 2005 | 11:49 AM
  #10  
maximazation's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (11)
 
Joined: May 2004
Posts: 1,882
From: Sunnyvale, CA
i have a manual and the hesitation occurs when accelerating through 2-3K RPM and in most gears
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
D Mason
8th Generation Maxima (2016-)
1
Jun 21, 2016 04:43 AM
Need help
5th Generation Maxima (2000-2003)
23
Oct 2, 2015 08:56 AM
jchronis2552
4th Generation Maxima (1995-1999)
2
Sep 21, 2015 05:52 AM
jcvgn
4th Generation Maxima (1995-1999)
1
Sep 10, 2015 08:03 PM
MidnightMaxima_22
7th Generation Maxima (2009-2015)
6
Sep 6, 2015 01:18 PM




All times are GMT -7. The time now is 12:17 PM.