Dyno Sheet w/ Supercharger
![[maxi-overdose]'s Avatar](https://maxima.org/forums/customavatars/avatar1856_1.gif){kind=avatar}
08-12-2003, 08:13 PM
#4
Senior Member
Join Date: Sep 2000
Posts: 1,452
Re: Dyno Sheet w/ Supercharger
08-13-2003, 05:24 PM
#9
Originally posted by Ammi
So I say about 260 whp w/ only supercharger?
So I say about 260 whp w/ only supercharger?
Basically, the MEVI makes up for what I am losing with whatever phantom problem I have.
My vacuum reads low - that's theo nly symptom. 16-17 instead of 20-25.
Many many many people have looked at it, and I have reistalled all hoses and the MEVI twice.
08-13-2003, 06:48 PM
#10
Senior Member
Join Date: Sep 2000
Posts: 1,452
I was under the impression the vacuum was suppose to be 17-22hg. Mine's 17 as well and imo, making decent power.
SC paired with good mandrel bent 2.5" exhaust and a 3.33"-3.00" (3.6" is stock) pulley should put down 240-280whp, depending on the generation of max (4th or 5th), and if it has cold air intake or not.
SC paired with good mandrel bent 2.5" exhaust and a 3.33"-3.00" (3.6" is stock) pulley should put down 240-280whp, depending on the generation of max (4th or 5th), and if it has cold air intake or not.
08-13-2003, 07:41 PM
#11
Several others with 4th Gen Autos even are puling 260+ without a MEVI:
BenBlanco218
Jane97SE
And with the MEVI they are even better (over 300hp)
Stephen Max
MardisGrasMax (back before he "took the plunge"
etc....
IanS
BenBlanco218
Jane97SE
And with the MEVI they are even better (over 300hp)
Stephen Max
MardisGrasMax (back before he "took the plunge"
etc....
IanS
Thread
Thread Starter
Forum
Replies
Last Post
KabirUTA13
5th Generation Classifieds (2000-2003)
19
10-17-2015 02:15 AM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM