Supercharged/Turbocharged The increase in air/fuel pressure above atmospheric pressure in the intake system caused by the action of a supercharger or turbocharger attached to an engine.

FS: *NEW* V1 S/C Plate Kits...

Thread Tools
 
Search this Thread
 
Old 08-27-2009, 09:04 PM
  #441  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by 01AZI30t
Matty I'm interested in the Vortech starter kit and was hoping you could answer a few quesitons.
Originally Posted by 01AZI30t
Will this kit work on a 2001 Infiniti I30t??
Yes it will work on a 2001 Infiniti I30t. (T is actually better for traction issues with the increased power)

Originally Posted by 01AZI30t
Does this kit require dyno tuning or a chip?
You can dynotune or go with a ECU Upgrade from JWT, but either are NOT necassary a standard Kit. If you want to go bigger and more power, then you go down that road. Nothing to really worry about when you are starting out

Originally Posted by 01AZI30t
What can I expect to make for power on an amount of boost that is safe for the stock motor?
Best answer for this is to search cause its kind of a loaded question. Alot of guys on here see about 100hp with a stock Vortech kit. Can go up and up depending on what pulley you decide to use.

Originally Posted by 01AZI30t
Also how much are the kits going for right now and do you still have any in stock? Thanks!
PM me for details. I have (2) Full Kits in stock.

-Matt
matty is offline  
Old 08-28-2009, 11:11 PM
  #442  
Senior Member
 
scmaxima's Avatar
 
Join Date: Aug 2009
Location: NY, New york
Posts: 202
sorry to jack up the thread but i got a question for anyone here.
if the v1 s-trim was first introduced in like 2002?, the t-trim was then released in 2006 which is 4 years later, so now if im going to buy a new blower, should i just wait a couple of month till 2010 cause they may get a new trim or do you think that theres still some time for a new one?
scmaxima is offline  
Old 09-02-2009, 07:28 PM
  #443  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Thats really up to you.
matty is offline  
Old 10-05-2009, 05:32 PM
  #444  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump to the top
matty is offline  
Old 10-21-2009, 08:48 AM
  #445  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
bump it to the top, in stock
matty is offline  
Old 12-15-2009, 04:32 PM
  #446  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
To the top

2 in stock
matty is offline  
Old 12-31-2009, 04:54 AM
  #447  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Holiday bump
matty is offline  
Old 01-01-2010, 03:07 AM
  #448  
Supporting Maxima.org Member
 
jordandalley's Avatar
 
Join Date: Sep 2004
Location: Townsville, Australia
Posts: 538
If it means anything, I've had my "Matty's V1 Plate" for over a year now and it's absolutely the best thing I've bought for my car since the supercharger kit itself. I haven't chewed a belt since and the plate is very strong and is a quality build. I hope people continue to support his production. Thanks Matty!

Last edited by jordandalley; 01-01-2010 at 03:10 AM.
jordandalley is offline  
Old 01-26-2010, 08:32 PM
  #449  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump it up...

2 Kits Available
matty is offline  
Old 02-15-2010, 12:05 PM
  #450  
Junior Member
 
Casanova's Avatar
 
Join Date: Feb 2010
Posts: 54
thats gonna look like fun
Casanova is offline  
Old 02-26-2010, 07:13 AM
  #451  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Snow Day bump
2 available

-matt
matty is offline  
Old 03-27-2010, 09:54 AM
  #452  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
to the top
matty is offline  
Old 04-30-2010, 02:52 PM
  #453  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
ONE V1 Plate Kit Available
matty is offline  
Old 07-07-2010, 09:14 PM
  #454  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump to the top...one in stock
matty is offline  
Old 07-26-2010, 06:12 AM
  #455  
Senior Member
iTrader: (7)
 
doublea's Avatar
 
Join Date: Oct 2000
Location: Montreal - Qc
Posts: 4,553
Hey Matty, I was wondering how people deal the extended coolant adapter and the fact the the Alternator can no longer bolt to it's original place. Do most people fabricate a bracket wich I can do but is there an off the shelf solution ? I'm trying to save a bit of time.
doublea is offline  
Old 07-26-2010, 07:22 AM
  #456  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by doublea
Hey Matty, I was wondering how people deal the extended coolant adapter and the fact the the Alternator can no longer bolt to it's original place. Do most people fabricate a bracket wich I can do but is there an off the shelf solution ? I'm trying to save a bit of time.
Are you talking if the blower comes off, and you run stock ? Or your wondering where the alternator bolts to once the blower is mounted to the motor ??

-matt
matty is offline  
Old 08-31-2010, 08:09 PM
  #457  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump it up...one left
matty is offline  
Old 10-28-2010, 08:25 PM
  #458  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
To the top

matt
matty is offline  
Old 11-11-2010, 05:47 PM
  #459  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
All Supercharger Kits are SOLD OUT

PM me if youll be interested in a kit for the future and I can start another list for another run...










.

Last edited by matty; 11-11-2010 at 05:49 PM.
matty is offline  
Old 12-28-2010, 05:10 AM
  #460  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
To the top

Taking orders

-matt
matty is offline  
Old 01-01-2011, 06:58 AM
  #461  
Senior Member
iTrader: (7)
 
doublea's Avatar
 
Join Date: Oct 2000
Location: Montreal - Qc
Posts: 4,553
Originally Posted by matty
Are you talking if the blower comes off, and you run stock ? Or your wondering where the alternator bolts to once the blower is mounted to the motor ??

-matt
Hi Matty, I just found that I never replied to you. I actually fabricated an aluminum bracket and the alt is solidly fixed. Sorry to not have respond faster, I must have forgot about this.

I'm going to do everything to have the car ready for spring 2011, even if the car is not running yet I'm very happy of this kit, the quality is awesome and I'm grateful that Matty's has put this kit together, it really worth every penny.

Happy new year and wish you the best.

AA
doublea is offline  
Old 01-12-2011, 08:03 AM
  #462  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Taking orders for Supercharger Kits
matty is offline  
Old 02-17-2011, 03:12 PM
  #463  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
to the top
matty is offline  
Old 02-18-2011, 09:15 PM
  #464  
Junior Member
 
Mr.Nismo_215's Avatar
 
Join Date: Nov 2010
Location: philly
Posts: 44
can you use the stock belt adjuster with this kit
Mr.Nismo_215 is offline  
Old 02-19-2011, 08:59 AM
  #465  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Yes. The stock tentioner is used with this kit, unlike the V2 kit

I currently have one in stock with Nickel Coating

Matt
matty is offline  
Old 02-19-2011, 01:50 PM
  #466  
Junior Member
 
Mr.Nismo_215's Avatar
 
Join Date: Nov 2010
Location: philly
Posts: 44
so you cant use the stock belt adjuster on the v2 , but you can use it on the v1 and your kit?
Mr.Nismo_215 is offline  
Old 02-19-2011, 04:28 PM
  #467  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by Mr.Nismo_215
so you cant use the stock belt adjuster on the v2 , but you can use it on the v1 and your kit?
Yes. They V1 uses the stock tentioner along with an idler pulley, which comes with the kit

-matt
matty is offline  
Old 04-08-2011, 06:12 AM
  #468  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump...(1) in stock

-matt
matty is offline  
Old 04-30-2011, 10:10 AM
  #469  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
One in stock ladies and Gents...

Bump to the top

-matt
matty is offline  
Old 05-18-2011, 06:37 PM
  #470  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump it up
matty is offline  
Old 06-09-2011, 08:17 PM
  #471  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
bump it up

-matt
matty is offline  
Old 06-09-2011, 08:24 PM
  #472  
Senior Member
iTrader: (22)
 
mista0406's Avatar
 
Join Date: Oct 2007
Location: New Orleans,La.
Posts: 1,394
great kit matt, really glad I got this kit, made it hella easy to make my S/C setup my own
mista0406 is offline  
Old 07-01-2011, 07:19 PM
  #473  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Back up to the top

thanks guys
matty is offline  
Old 07-21-2011, 07:47 PM
  #474  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Last kit was sold. None in stock at this time.
matty is offline  
Old 09-16-2011, 09:55 AM
  #475  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump to the top

-matt
matty is offline  
Old 10-27-2011, 05:51 PM
  #476  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
To the top

-matt
matty is offline  
Old 11-08-2011, 04:48 AM
  #477  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
ONE Full kit in stock

-matt











.
matty is offline  
Old 12-12-2011, 07:42 PM
  #478  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
bump it up

one in stock
matty is offline  
Old 03-19-2012, 11:20 PM
  #479  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump it up

one in stock
matty is offline  
Old 04-21-2012, 11:09 PM
  #480  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Bump it up
matty is offline  


Quick Reply: FS: *NEW* V1 S/C Plate Kits...



All times are GMT -7. The time now is 01:11 AM.