**Gauging Interest: V1 Supercharger Starter Kit for 3.5 Ltr. Motor**
04-05-2008, 08:09 PM
#201
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Not a big fan of that kit. The reason is, is you loose a significant amount of power through that drive shaft and what brand blower is that ?? Who would service the blower if anything went wrong ?? Its also pretty weird that the housing is RIGHT against the MAF ??
ALSO: If you look at that picture, that front valve cover is seeing pressurized air. That is a HUGE nono. That motor would last a day.
ALSO: If you look at that picture, that front valve cover is seeing pressurized air. That is a HUGE nono. That motor would last a day.
08-13-2008, 06:10 PM
#210
aka The Doom Ship
Join Date: May 2004
Location: DFW, TX
Posts: 1,788
R.I.P.
I thought you weren't going FI.....via your cam selection a while back?
08-25-2008, 07:01 AM
#221
Matty how close are you there is a guy with Altima thats running a S/C..
Man this thind sounds sick and 12.8 in the 1/4 at 4 PSI..
http://www.nissanclub.com/forums/eng...-complete.html
Man this thind sounds sick and 12.8 in the 1/4 at 4 PSI..
http://www.nissanclub.com/forums/eng...-complete.html
Last edited by anm6; 08-25-2008 at 08:12 AM.
08-25-2008, 06:16 PM
#222
aka The Doom Ship
Join Date: May 2004
Location: DFW, TX
Posts: 1,788
Nice find! Amazing...
Matty how close are you there is a guy with Altima thats running a S/C..
Man this thind sounds sick and 12.8 in the 1/4 at 4 PSI..
http://www.nissanclub.com/forums/eng...-complete.html
Man this thind sounds sick and 12.8 in the 1/4 at 4 PSI..
http://www.nissanclub.com/forums/eng...-complete.html
08-27-2008, 11:39 AM
#224
Newbie - Just Registered
Join Date: Feb 2007
Posts: 10
Yeah, he did all the custom work himself except for the pulley.
That thing sounds amazing!!!
That thing sounds amazing!!!
11-20-2008, 07:09 PM
#226
Senior Member
Join Date: Aug 2007
Location: Philadelphia
Posts: 603
will we ever see a supercharger for 5.5 or 6th gen....
12-04-2008, 02:39 PM
#228
Junior Member
Join Date: Oct 2008
Location: Miami,Fl
Posts: 21
i am in.... i live in miami
12-04-2008, 02:45 PM
#229
you are in what?
these will NEVER be made.
if it was easily doable, or in fact doable and he would make a profit, he(or any aftermarket company who wanted to be the sole provider of FI for a 5.5 gen, and make a boat load of profit) would have done it long ago. sorry i don't care what anyone says. matty could make a good chunk of change if it was possible to make a plate to attacked the blower onto. i wish it was already made/possible i'd have one. shelling out 6k for a bolt on turbo kit sucks. then again a RMT is cheap as hell...2.5k...
edit: go buy the one, one page back install it, and let us know how it goes. matty said it's to close to the maf and this is arguable. you could always put the maf right before the tb, or run an intercooler and the maf issue would cease to be a problem. and if you're really serious wouldn't you use a pressure sensor with stand alone? the altima guy pulled amazing times with a similiar set up on only 4lbs of boost.
these will NEVER be made.
if it was easily doable, or in fact doable and he would make a profit, he(or any aftermarket company who wanted to be the sole provider of FI for a 5.5 gen, and make a boat load of profit) would have done it long ago. sorry i don't care what anyone says. matty could make a good chunk of change if it was possible to make a plate to attacked the blower onto. i wish it was already made/possible i'd have one. shelling out 6k for a bolt on turbo kit sucks. then again a RMT is cheap as hell...2.5k...
edit: go buy the one, one page back install it, and let us know how it goes. matty said it's to close to the maf and this is arguable. you could always put the maf right before the tb, or run an intercooler and the maf issue would cease to be a problem. and if you're really serious wouldn't you use a pressure sensor with stand alone? the altima guy pulled amazing times with a similiar set up on only 4lbs of boost.
Last edited by Torgus; 12-04-2008 at 02:53 PM.
04-05-2009, 08:09 AM
#232
Supporting Maxima.org Member
iTrader: (29)
Join Date: Oct 2005
Location: Middleboro/Carver, Ma
Posts: 4,572
I really really hate to be the one to bump this, but when I was working on my car recently I got an idea. What about fabbing up a bracket that located a clockwise blower in place of the a/c compressor? There is plenty of room and it would allow one kit to cover 4th 5th and 5.5 gens, aside from chargepipe location.
04-05-2009, 08:17 AM
#233
I really really hate to be the one to bump this, but when I was working on my car recently I got an idea. What about fabbing up a bracket that located a clockwise blower in place of the a/c compressor? There is plenty of room and it would allow one kit to cover 4th 5th and 5.5 gens, aside from chargepipe location.
How is your supercharge Max running?
I need to get a ride soon to see how it pulls.
I need to figure out what i want to do next on my max to stay even with you...
04-05-2009, 11:04 AM
#234
aka The Doom Ship
Join Date: May 2004
Location: DFW, TX
Posts: 1,788
Noooooooo, not this thread again!!!!!....... 
Talk about leading on more than a stripper that promises to go home with you after she gets off work.
Talk about leading on more than a stripper that promises to go home with you after she gets off work.
Last edited by AllBlackMax; 04-05-2009 at 11:12 AM.
04-05-2009, 08:33 PM
#235
Member
Join Date: Dec 2008
Posts: 90
wow
i cant belive this is 2 yrs in the makeing well lemme just say ill give a deposit to see this happen i know people have offered there cars but heres one more 6th gen offer goodluck on your project i hope to see this dream become a reality
Last edited by 6spBaDAsS6ThGeN; 04-05-2009 at 09:01 PM.
04-24-2009, 01:51 AM
#236
Senior Member
Join Date: Mar 2002
Posts: 374
I was hoping it would happen, so I can do a cheaper F.I mod on my Altima with just a few tweaks
05-02-2009, 08:12 PM
#237
There are two shops that I know for a fact can fab up a turbo kit for my 5th gen: SFR and FAT (forcedairtech.com). I am very tempted to fork over 4-5k for a kit, however, there are too many out there...
...I wan't more whining and less sneezing.
And HATE vanity plates, but would LOVE to own a VQ35DESC plate ANYDAY. Matt. Give me a reason to buy a vanity.
1. kamilkluczewski
2. bigirish (Altima)
3. KUBLKMAX
4. Jay.Are (Possible Doner)
5. kobalt
6. DRod
7. AllBlackMax
8. 02altimaSEny (Altima)
9. roro (Possible Doner) (Altima)
10. !PrjctMax!
11. Merlyn
12. PRO - 1
13. RideTuner
14. UnMaTcHeD
15. digitalbow (Altima)
16. oabtopgun (Altima)
17. MaximaGT-R
18. maxspeed96CT
19. sparks03max (3/3/08) Possible Doner
20. ME
21.
Even starting the kit at 3k...that list is sitting at $60k assuming all are still interested. Sweet eh?
...I wan't more whining and less sneezing.
And HATE vanity plates, but would LOVE to own a VQ35DESC plate ANYDAY. Matt. Give me a reason to buy a vanity.
1. kamilkluczewski
2. bigirish (Altima)
3. KUBLKMAX
4. Jay.Are (Possible Doner)
5. kobalt
6. DRod
7. AllBlackMax
8. 02altimaSEny (Altima)
9. roro (Possible Doner) (Altima)
10. !PrjctMax!
11. Merlyn
12. PRO - 1
13. RideTuner
14. UnMaTcHeD
15. digitalbow (Altima)
16. oabtopgun (Altima)
17. MaximaGT-R
18. maxspeed96CT
19. sparks03max (3/3/08) Possible Doner
20. ME
21.
Even starting the kit at 3k...that list is sitting at $60k assuming all are still interested. Sweet eh?
Last edited by MIK3; 05-02-2009 at 08:16 PM.
09-03-2010, 11:05 AM
#238
Senior Member
Join Date: Jul 2009
Posts: 424
v1 or v2 plate can fitting on 6th gen maxima?