7 spoke G35c rims on a 6gen.

 

Looks decent, but I think I might prefer the stock wheels on a 6 gen.

 

^ Those look infinitely better than the stock wheels, IMHO. Kinda reminds me of a G sedan... ;-)

 

Thanks, I was kinda worried but I felt the color of the rims might look good on Smoke. The G35c rims have an eye catching effect when the spin.

 

Installed my g35 rims last night...took almsot two hours.
Nothing like a little elbow-grease and selfaligning :]

 

Why? Were you mounting the tires too or something?

 

Yeah, I had to get new tires because the previous owner balded the rear tires and the two front tires weren't exactly in prestine condition.

But here's the thing.
Wheels only cost me $280 :]
www.craiglists.com

Pretty damn good deal, don't ya say?

 

looks good, though those tires look a bit on the small side...

 

Thanks. Small? They are the stock RS-A's 245/45/18.

 

I was talking to riceyasian....

 

Yeah they're regular ol' 250/50 toyo trts on 17"
Gives me better response and it's well balanced.

Any suggestions on what tires to purchase next time around? anyone?




Should have seen the **** rims I had before these.
*sigh..memories.

 

250 width? You sure about that?

 

When I go on Ebay all i find is the Chrome Replicas... I dont want those i want the alloy's. anyone know where or how i can go about buying them??

 

My bad, it's 235/50/17
Excuse me for I'm illiterate

 

Check out the first post of this thread... Local papers and Craigslist are good ideas, too.

 

alright no doubt thanks

 

Craiglists is probably your best bet.
I got mine from a seller on craigslist.

What major city is Freeport located by?

Choose the Top 3 cities that are cloest to you:

albany (17600)
binghamton (1220)
buffalo (9789)
catskills (870)
chautauqua (268)
elmira-corning (416)
hudson valley (10665)
ithaca (3670)
long island (35905)
new york city (363524)
plattsburgh-adirondacks (580)
rochester (16135)
syracuse (4501)
utica (587)
watertown

 

www.g35driver.com
www.g35frenzy.com

register, and use the classifieds sections there...

 

do you know of anyone who has a set of G35 wheels they would like to sell?

 

^ Check the classifieds on here or better yet g35driver.com.

 

I searched the whole thread and still havent found my answer so lets see if anyone can help me. What would be the correct size tire to run the 19" ray wheels on an 03 max? Also, i read they are staggered so would i run the 30mm in the front and 33mm in the back or vice versa? Thank you.

 

245/35/19

You can run whichever you feel like F/R.

 

Ok, im not sure, but will these fit perfectly fine on my 99??

http://cgi.ebay.com/ebaymotors/05-In...80737484QQrdZ1

 

Yes, but you may want to throw some spacers on there. 45mm is a high offset IMO.

 

What will happen with 45mm? What will the spacers do? Sorry i dont have good knowledge about this stuff.

 

Your wheels will be sitting deep inside the wheel wells. The spacers would bring them out more closer to being flush with the fenders, which is all the rage on here. But if you don't care about things like that, then you'll be find without the spacers I think.

 

wow jason, you got all the answers!!!!

 

I try my best, Gregg.

 

Will my speedometer and whatnot be correct? Would it cause any distruptions in the ride quality? I think it would be better to go with spacers because I wouldnt want my car looking lke its running on bicycle tires. Where would u be able to get them?

Thanks for the help

 

Wow, I am suprised that you have been on the forums for so long and you don't know the answers to these basic questions. I assume your car is stock?

With those tires in the auction, your speedo would be 4.0% too slow. Look for H&R spacers on eBay or the GD section. Check the stickies for correct tire size/offset issues.

 

Got me a set of the G35 coupe 18's a couple of weeks ago...

 

hahaha i know ive been on and off here. I do know alot of stuff but just this kinda stuff confuses me, and yeah my car is mostly stock.

Im wanna get some good rims/wheels, time for a change.

 

Looks nice. What springs and struts are you running?

 

looks like you're running stock g35 tire sizes, eh? 225/45/18 front 245/45/`8 rear....no rubbing problems?

 

Maxspeed and Illuminas


yes on both counts.. the back rubs on decent size bumps. I will change them to 235/40 when i get them replaced.

Big thanks to irish and everyone else that has contributed to this thread.. it has really helped me alot!

 

I know these aren't G35 rims...but they're their close cousin...

anyone know if these 350Z rims will fit a 5th Gen SE?



The auction states
... so if they fit a G35....does that translate into them fitting a Max?

Thanks.

------------

EDIT

a little more searching and browsing and I found the answer myself.

for anyone else interested: http://forums.maxima.org/showpost.ph...5&postcount=10

 

will they fit a 4th gen? anyone got pics?

 

how much more or less do the G35 rims weigh compared to the 03 Se rims

 

try reading the first post in this thread.....

the SE rims weigh about 24-25lbs...

 

i did, i thought u were talking about the g35 rims. not the Se rims.
thanks for clearing it up tho bro.