1st & 2nd Generation Maxima (1981-1984 and 1985-1988) Learn more and share information about the 1st and 2nd Generation Maximas.

Fuel regulator temp sensor

Thread Tools
 
Search this Thread
 
Old 02-03-2019, 11:45 AM
  #1  
Senior Member
Thread Starter
 
FanaticMadMax's Avatar
 
Join Date: Jun 2003
Location: NM
Posts: 2,145
Fuel regulator temp sensor

I’ve been wondering if a broken fuel pressure regulator temp sensor cause cold start stalling or hard starts? I saw a temp sensor spade connector broken off and the wire was laying over the timing cover.
FanaticMadMax is offline  
Old 02-03-2019, 10:42 PM
  #2  
Senior Member
iTrader: (1)
 
chrome91's Avatar
 
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 7,538
https://www.zcar.com/forum/11-84-89-...mp-sensor.html

Also, the Fuel Temp Sensor which is screwed into the FPR and has the contact that you are talking about is not the problem. It is there to tell the computer when the fuel temp is high so that the computer can compensate for high fuel temp by raising the pressure a negligible amount. In reality it is Nissan over engineering and you can drive with it disconnected with no adverse effect.
from a Z31 site so still the same VG30E, i'd almost check fuel pressure and change the fuel filter first
chrome91 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lowered_a33
5th Generation Maxima (2000-2003)
1
12-07-2015 11:36 AM
jeffrohotrod
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
16
06-16-2015 05:26 PM
ACruzer
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
4
06-09-2013 12:31 PM
ti2tmax
4th Generation Maxima (1995-1999)
1
07-21-2006 06:57 AM
cardana24
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
19
04-08-2005 05:15 AM



Quick Reply: Fuel regulator temp sensor



All times are GMT -7. The time now is 08:48 PM.