2 years of work... some pics
#42
Thread Starter
Supporting Maxima.org Member
iTrader: (30)
Joined: Apr 2002
Posts: 40,647
From: 127.0.0.1
Originally Posted by Jeff92se
I would have sold the Jimmy and kept one of the maximas but too late now. hehe
cleared the tie rod unlike the maxima wheels, although I was owned by the upper control arm
http://digitalbeta.net/images/Cobra%20Mustang/2.jpg
I suppose that means its time to order the wilwood kit and maybe a .5-.75" spacer
oh and I found what was causing all the free play... probably best to order a new control valve, or a rack and pinion . There was about 1/4" of play back and forth
#46
Thread Starter
Supporting Maxima.org Member
iTrader: (30)
Joined: Apr 2002
Posts: 40,647
From: 127.0.0.1
Originally Posted by subs1000w
those rims would look good
I dont even have anywhere to put them so I'm just leaving them in the jimmy until I can get the garage picked up alittle bit.
I'm going to need 1" to 1.25" spacers as it is right now with drums, the Wilwood kit widens the track width about .5" on each side, not quite enough to make it perfect but it helps.
Originally Posted by vansskaterfreek
they look like mustang cobra wheels. am i right??
#47
Originally Posted by MrGone
not only that, but I can edit your posts for your crap
Mustang > Camero
Might be picking up a set of wheels today
Your really going to have a fit when I post pics
Mustang > Camero
Might be picking up a set of wheels today
Your really going to have a fit when I post pics
2. I've already got wheels that are for a BBK upgrade from the factory
my camaro > your Rustang.
and I don't have or need a silly ricer tach on my hood.
#51
Thread Starter
Supporting Maxima.org Member
iTrader: (30)
Joined: Apr 2002
Posts: 40,647
From: 127.0.0.1
Originally Posted by awsm66
cartruck
haha just messing with ya...the front looks good at least : wall:
haha just messing with ya...the front looks good at least : wall:
I had just about convinced myself to buy the Total Control Products manual steering rack ($1300) but I want to use a hydrobooster (~$550) and that requires powersteering, the TCP rack is $2000 (+ $500ish for the KRC adjustable pump) which is just too much right now. Wilwoods are going to be ~$1600 all said and done and haven't even gotten to suspension yet
Can't really afford to do it all at once, but rolling on the gas from idle and lighting them up already makes it worth it (even though I could do that in the max )
Thread
Thread Starter
Forum
Replies
Last Post
JoshG
4th Generation Maxima (1995-1999)
15
09-16-2015 09:56 PM