Doing timing belt, what parts do I need?
#41
Originally Posted by ArcticDC5
So, back on course...Does anyone know where I can get torque specs at for the timing belt job?
look up man.
#42
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,614
Originally Posted by Matt93SE
Open your handy FSM. look on page EM-32. align the marks on the distributor as shown in the pictures, then install it. If you are standing in front of the car facing the back, it should be pointing at around 7-8 o'clock position, toward the front right corner of the car.
It SHOULD NOT be pointing at the 11 o'clock position as shown in the FSM.
As long as you align the marks according to the picture above it, then it will go into the right place. if it doesn't fire, pull it out, turn the engine a full turn, then do it again.
It SHOULD NOT be pointing at the 11 o'clock position as shown in the FSM.
As long as you align the marks according to the picture above it, then it will go into the right place. if it doesn't fire, pull it out, turn the engine a full turn, then do it again.
and piston #1 should be at TDC when i do this correct??? if so then i was right in the first place and i don't have an FSM at all but i do have a Haynes but i just wanted to ask here just to make sure.
Thanks Matt.
#43
Originally Posted by maxima94ever
i have a 94 se it has 146,000 miles and i believe the timing chain has never been changed since i had the car from 49,000miles, can smebdy explain it to me if it has to be changed at 60,000. thank you
Thread
Thread Starter
Forum
Replies
Last Post
Ray229Harris
3rd Generation Maxima (1989-1994)
10
09-16-2015 08:16 PM
max_speed97
5th Generation Classifieds (2000-2003)
2
08-26-2015 07:46 PM
Maxima2010 Prem
7th Generation Maxima (2009-2015)
4
08-13-2015 11:34 AM