Sounds good to me Aaron just let us know when u need the deposit money, Keep up the good work!

 

I will definitely let everybody know as soon as humanly possible! I don't want any further delays to happen.

 

hey,
do you know how think its going to be?
i have some fitment issues right now with my intake, and was just wondering how think it would be, thanks

 

The spacers will be made out of a 1/4" thick phenolic.

Right now, the VG kit is expected to have a 1/4" Throttle Body Spacer, a 1/4" Dual Duct (Elbow) Spacer, 1/4" IACV-AAC Spacer, all the nessecary hardware with longer bolts, two coolant bypass fittings, detailed instructions with photos, and silver die cut Nissan Works window decals.

The price for this kit is expected to be cheaper than the VE kit (which is priced at $145 plus shipping).

 

Sorry guys, I waited as long as I could. I've got my engine 95% back together. Lacking only a few vacuum lines, plugs, crank pulley and belts, then finally intake plumbing. Especially since it appears it may be a few more weeks before done, just can't wait to get the car back on the road. I'll have to consider if I want to tear the manifold down again to install this spacer once they're done and the price is posted.

 

what if you dont want the TB part? just the lower intake section?

 

That's alright. This kit will be VERY easy to install. You don't even have to remove the intake manifold to install it.

I will only sell this as a complete kit after I test it.

Also, there won't be a lower intake manifold spacer or an upper intake manifold spacer in this kit. If you guys want that, the price of the kit will EASILY cost over $250 since it will be much much more complicated than the VQ35DE kit I offer. There isn't enough demand in the VG crowd to support my costs if you want LIM and UIM spacers included.

I only plan to make a kit that includes what is stated above. I will test it first to make sure I see the temp decreases I project.

 

i dont know why my name isnt on the list but in any case re add me. i am for sure getting one. thanks

 

if i sign up i need a pic or 2
i made a custom intake, so i need pics

 

Definitely in so far:
1) 92maxvg30e
2) Maximahappy22
3) GRNMAXDMON
4) CapedCadaver
5) Alex_V
6) xMaxed90x
7) maxitech
8) Black92GXE
9) fastflyingasian
10) Plaman88

decision pending:
1) Chris Gregg

 

I will post pics just as soon as I get the spacers made.

With the spacer kit installed, the dual duct tube will sit exactly a 1/2" further towards the front of the vehicle. That should give you a good idea if your custom intake will still fit or not.

 

kind of, but not all that much.
ill decide once i see pics

 

___________________

 

Update: I just wanted to give everyone an update on the development of the VG Spacer Kit.

The final cost has been set at $125 plus shipping.

The kit will include the following:
1) 1/4" Dual Duct Spacer
2) 1/4" Throttle Body Spacer
3) 1/4" IACV Spacer
4) All necessary zinc plated lengthened grade 8 bolts with washers
5) Two Coolant Bypass Fittings
6) Detailed Installation Instructions with photos and torque procedures
7) ... and die cut decals

The EXPECTED date that these kits will be ready to ship is Monday, 6/18/07. That date could change in either direction, so please check this thread for further updates. It depends heavily on how the testing goes. It's possible that the people going to Maxus can get these spacers on time. I am doing everything I can to make sure you get them before Maxus.

I will need a 50% deposit from everyone that has added their name to the list. Once I receive the majority of the deposits, the spacers will be made. Right now, the CNC Machine time is not set in stone until I receive most of the deposits.

For the people on the list, please Paypal your deposit of $62.50 to XXXadogg18@hotmail.comXXX.

Make sure you include the following with your Paypal payment:
1) Your shipping address
2) Your full name (if diff from your account)
3) Your Maxima.org name
4) And a Paypal message that this payment is a deposit for the VG Spacers.

Thank you for everyone's cooperation! Please let me know if you have any questions or concerns.

 

Can you post some pics?

 

The parts have not been made yet. They won't be ready for a couple weeks.

Here are some pics for the VQ35DE that show the quality of the spacers I make:





One more:



These pics were taking from my website.

 

I'm not worried about the quality because from following the threads for a couple of weeks I can see it's a quality product. Can you tell what material you made them from?

 

They are made from a laminate type of glass based phenolic. It's a very hard and durable material and will definitely last a lifetime.

 

So far I have not received any deposits from anybody. If I don't receive the majority of the deposits by the end of this week, then I will have to abort or postpone this project.

 

All you guys that said you were in...where you at fellas?

1) 92maxvg30e
2) Maximahappy22
3) GRNMAXDMON
4) CapedCadaver
5) Alex_V
6) xMaxed90x
7) maxitech
8) Black92GXE
9) fastflyingasian
10) Plaman88

 

still here...

 

I have still not received a single deposit from anybody on this list. I am VERY sorry, but I will have to postpone production on these VG spacers until I receive the majority of deposits.

Once I receive enough deposits, I will schedule a CNC session and have these made, which takes at least 2 weeks. I went ahead and scheduled everything thinking I would receive these deposits quickly. I wanted to have these made before Maxus, but it might not be possible.

I really want to get these made for the VG crowd. But I can't afford to pay all the setup costs involved. I hope everybody understands.

Thank you for your cooperation.

Again, is what I need from everybody:

I will need a 50% deposit from everyone that has added their name to the list. Once I receive the majority of the deposits, the spacers will be made. Right now, the CNC machine time is not set in stone until I receive most of the deposits.

For the people on the list, please Paypal your deposit of $62.50 to XXXadogg18@hotmail.comXXX.

Make sure you include the following with your Paypal payment:
1) Your shipping address
2) Your full name (if diff from your account)
3) Your Maxima.org name
4) And a Paypal message that this payment is a deposit for the VG Spacers.

 

I will paypal you the deposit on the 15th.... sorry - but haven't been on the .org since the max went to the body shop (still there!!) a couple months ago...

I'm still in and will send you the deposit! Come on guys! He wouldn't have taken the time to do this if we hadn't shown interest!! Just give me till next payday and I'll give you my deposit

 

The product looks fantastic. Look at it! Even the instructions are amazing. Even though my sorry *** can't scrounge up the cash at the moment I would still like to say that this is a mod. that is worth it. I was even going to make these myself. The VG is a sleeper. Good luck to you all, don't let this fall through.

 

Had no idea you were taking deposits yet.. Maybe pm-ing people would be more effective since some of us aren't on here everyday.

I'll send deposit now.

 

Ok, I figured everybody has subcribed to this thread so they would see when I posted updates.

I will send out PMs to everybody on the list to make sure they know, but I notice that some have limited Maxima.org activity according to the stats on their profile.

Thank you for your deposit.

 

Yeah... PM me so we can talk about what's going on with the test/prototype stuff.

 

Aaron i will send you the deposit tomorrow night cuz i get paid tomorrow. i also wanted to know about the EGR part that i might need cuz i have the EGR unit in mine.

 

What EGR part are you referring to? My spacers will not effect the EGR system in any way.

 

I'll get mine to you hopefully tonight...right now I'm frantically packing for a road trip over the weekend.

 

Aaron...don't forget to update the list on who paid.

 

OK, what's with the three X's before and after your name? Are any (and how many) of them part of your e-mail...I'm having difficulties sending you a Paypal.

 

i believe it's this.... adogg18 AT hotmail.com

 

Payment sent...Add me to the list so we can get these things produced!

 

I can't update the list since I did not start this thread. So far, we have two payments.

Note to everyone on the list:

Please make sure you follow the 4 steps when you make your payment.

I received one payment that did not include the necessary information and I have no idea who made the payment.

For the people on the list, please Paypal your deposit of $62.50 to adogg18 AT hotmail dot com.

Make sure you include the following with your Paypal payment:
1) Your shipping address
2) Your full name (if diff from your account)
3) Your Maxima.org name
4) And a Paypal message that this payment is a deposit for the VG Spacers.

Also, you do not add the XXXs with the email address. My Paypal address is XXXadogg18@hotmail.comXXX without ANY X's. The XXXs are just to prevent spam.

Thank you.

 

Copy and paste the list into a post...you then mark who paid and update the list as you're getting payment.

C'mon man!!

 

There are 7 pages in this thread. If I post a list and keep updating that specific list, nobody will know what page it will be on since new pages are constantly being added to this thread.

It appears that a lot of people missed my initial post about the deposits.

I will just keep making new posts everytime I receive a new deposit just so people know how much progress we are making.

 

Here is the final list of people showing who has made their deposit:

1) Alex_V
2) maxitech
3) Jbr8k DEPOSIT RECEIVED
4) Maximahappy22
5) ColombianMax
6) Dhunterx
7) nForce
8) xMaxed90x
9) GRNMAXDMON
10) nubiannupe
11) mrkanda
12) 92maxvg30e
13) Dillbag
14) capedcadaver
15) Black92GXE
16) fastflyingasian
17) Plaman88
18) jonmandude
19) exub

I received a deposit from one person that did not include the proper information with their payment. I sent an email to confirm this information. Please reply to that email. Thank you.

Once again, please make sure you include the following with your deposit. It's very important that you include this information so you have reserved your spot to get a kit.

1) Your shipping address
2) Your full name (if diff from your account)
3) Your Maxima.org name
4) And a Paypal message that this payment is a deposit for the VG Spacers.

Thank you.

 

Your deposit is due!!

http://forums.maxima.org/showthread....63#post5751763