ve vq swap out
#163
That's what I would think. Dandymax made 270whp NA on a vq30. I don't understand why I wouldn't be able to get close to that with my ve, an 00VI, headers, cams, and a good tune. My engine has already put down 205 whp...
Last edited by 505max94se; 07-01-2008 at 12:16 AM.
#164
according to wikipedia, the 240sx, axxess, and pintura/ford corsair all in 89.
otherwise, I don't know.
otherwise, I don't know.
On the other side of the argument, why does it matter if it's a truck engine or not? An engine is an engine, some are better for specific reasons, but almost any engine can be reworked for more power. Power is power, right?
#165
The KA was designed as a long-stroke motor for good low end torque and midrange response. It's also not balanced very well (has a half-counterweight crank) and simply doesn't rev. peak torque is in the 3500-4500rpm range, not 5000-6000 as usually seen in higher revving engines like the SR and the newer VQ-HR and the VR engines.
They're great for driving around town, but not for high-revving performance. my KA will stay running at 20mph in 5th gear... it dosn't have any pull of course, but it still runs. Try doing that with an SR..
The good thing about the KA is torque, and lots of it. you can make upwards of 700hp on it, but it involves some veyr major block and head work to make the head stay on it. (above 500whp, they have a tendency to lift the head and blow gaskets) making 300-400hp reliably is no problem- you just have to build it right.
Doing the same with a VG, VE, VQ, or SR is same deal. they can all support 300hp on the stock engine for a little while (some longer than others), but all have been known to hold over 1000hp in race applications. all depends on how deep your pockets are and what your goals are at the end of the day.
They're great for driving around town, but not for high-revving performance. my KA will stay running at 20mph in 5th gear... it dosn't have any pull of course, but it still runs. Try doing that with an SR..
The good thing about the KA is torque, and lots of it. you can make upwards of 700hp on it, but it involves some veyr major block and head work to make the head stay on it. (above 500whp, they have a tendency to lift the head and blow gaskets) making 300-400hp reliably is no problem- you just have to build it right.
Doing the same with a VG, VE, VQ, or SR is same deal. they can all support 300hp on the stock engine for a little while (some longer than others), but all have been known to hold over 1000hp in race applications. all depends on how deep your pockets are and what your goals are at the end of the day.
Last edited by Matt93SE; 06-30-2008 at 09:09 PM.
#166
The KA was designed as a long-stroke motor for good low end torque and midrange response. It's also not balanced very well (has a half-counterweight crank) and simply doesn't rev. peak torque is in the 3500-4500rpm range, not 5000-6000 as usually seen in higher revving engines like the SR and the newer VQ-HR and the VR engines.
They're great for driving around town, but not for high-revving performance. my KA will stay running at 20mph in 5th gear... it dosn't have any pull of course, but it still runs. Try doing that with an SR..
The good thing about the KA is torque, and lots of it. you can make upwards of 700hp on it, but it involves some veyr major block and head work to make the head stay on it. (above 500whp, they have a tendency to lift the head and blow gaskets) making 300-400hp reliably is no problem- you just have to build it right.
Doing the same with a VG, VE, VQ, or SR is same deal. they can all support 300hp on the stock engine for a little while (some longer than others), but all have been known to hold over 1000hp in race applications. all depends on how deep your pockets are and what your goals are at the end of the day.
They're great for driving around town, but not for high-revving performance. my KA will stay running at 20mph in 5th gear... it dosn't have any pull of course, but it still runs. Try doing that with an SR..
The good thing about the KA is torque, and lots of it. you can make upwards of 700hp on it, but it involves some veyr major block and head work to make the head stay on it. (above 500whp, they have a tendency to lift the head and blow gaskets) making 300-400hp reliably is no problem- you just have to build it right.
Doing the same with a VG, VE, VQ, or SR is same deal. they can all support 300hp on the stock engine for a little while (some longer than others), but all have been known to hold over 1000hp in race applications. all depends on how deep your pockets are and what your goals are at the end of the day.
#168
Taking my Maxima to the Max!
iTrader: (3)
Join Date: Dec 2003
Location: Alachua, FL 32615
Posts: 1,096
"Not yet, I'm waiting for some parts im building my motor because i'm going boost."
So, we shall see if the best of both worlds (VQ and Turbo) will be able to successfully meet up inside the bay of a 3rd gen Max! Can't wait
#169
it depends where you want your powerband to be. do you want power up front and shift at lower rpms? do you want a to sacrifice lowend but get killer top end? do you want a fairly similar level of power throughout the rev range with neither a spectacular low end nor top end?
pick your poison.
pick your poison.
#171
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
TallTom
5th Generation Maxima (2000-2003)
50
07-08-2022 09:54 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM