Engine misfire/intermittent misfiring
Thread Starter
Newbie - Just Registered
Joined: Jun 2010
Posts: 14
Engine misfire/intermittent misfiring
Engine misfire/intermittent misfiring
i simply must share what caused my 1993 maxima to missfire it wasn't the injectors which i replaced. it wasn't the wires, plugs, fuel filter fuel pump, airfilter or erg related stuff. it was the single wire off the distributor for the camshaft position sensor. the connector was corroded and green and crumbled when it pulled on it. i simply stripped back some clean wire and crimped a new terminal, plugged it back in and presto! everything is normal again. save yourselves some time and look for this first. the camshaft position sensor wire.
you are all welcome.
i simply must share what caused my 1993 maxima to missfire it wasn't the injectors which i replaced. it wasn't the wires, plugs, fuel filter fuel pump, airfilter or erg related stuff. it was the single wire off the distributor for the camshaft position sensor. the connector was corroded and green and crumbled when it pulled on it. i simply stripped back some clean wire and crimped a new terminal, plugged it back in and presto! everything is normal again. save yourselves some time and look for this first. the camshaft position sensor wire.
you are all welcome.
Engine misfire/intermittent misfiring
i simply must share what caused my 1993 maxima to missfire it wasn't the injectors which i replaced. it wasn't the wires, plugs, fuel filter fuel pump, airfilter or erg related stuff. it was the single wire off the distributor for the camshaft position sensor. the connector was corroded and green and crumbled when it pulled on it. i simply stripped back some clean wire and crimped a new terminal, plugged it back in and presto! everything is normal again. save yourselves some time and look for this first. the camshaft position sensor wire.
you are all welcome.
i simply must share what caused my 1993 maxima to missfire it wasn't the injectors which i replaced. it wasn't the wires, plugs, fuel filter fuel pump, airfilter or erg related stuff. it was the single wire off the distributor for the camshaft position sensor. the connector was corroded and green and crumbled when it pulled on it. i simply stripped back some clean wire and crimped a new terminal, plugged it back in and presto! everything is normal again. save yourselves some time and look for this first. the camshaft position sensor wire.
you are all welcome.
Thread
Thread Starter
Forum
Replies
Last Post
shilov
4th Generation Maxima (1995-1999)
13
Feb 19, 2024 09:40 PM
ballerchris510
5th Generation Maxima (2000-2003)
6
Sep 11, 2015 05:29 PM