bimmer lights... oh shiet
#1
bimmer lights... oh shiet
they look hot. did not take a pic yet but i took my time and have one in right now. everything fits flush but does anyone know if the GTO likes will fit over the lights so i can make a brow for themthey dont stick out this just when you look right on top of them you can see the hood stick out just a little more. that is the only thing i can see wrong with them. but they are a he11 of a lot brighter than stock. i had the one stock and one bimmer light and i drove down the street and it did not seem like i had the stock light on. i would psot pics but you all are probably sick of seeing them. . next is 18" five star rims.
#4
Originally posted by whitymax
Chris do you know if they are the Maxima GTO's covers or did he get he BMW brow's? thanks for your help
Chris do you know if they are the Maxima GTO's covers or did he get he BMW brow's? thanks for your help
you can use either GTOs or the BMW brows, BMW brows need painting though.
here's mine
#5
Originally posted by ngthing
hey, what lights did you use, the ZKYs? if so, take some fitment pics from inside the hood too, I'd like too see.
you can use either GTOs or the BMW brows, BMW brows need painting though.
here's mine
hey, what lights did you use, the ZKYs? if so, take some fitment pics from inside the hood too, I'd like too see.
you can use either GTOs or the BMW brows, BMW brows need painting though.
here's mine
#7
i used the lights from a 325 '95 made from hella. the ones that i think everyone has. i ordered them from thepartsbin.com. i got them to fit in really well. there is no unsual gap between the hood and the light. there is a 1 cm. over hang of the hood. as for the bottom of the light. i glued the black strip to the contour of the light. and today i am going to tint the side markers so they look like they go together. i am going to try to make a brow from the CLEAR maxima brow. tell you how it goes. i dont have a digi camara so pics may take a week
Patrick
Patrick
#8
Originally posted by ngthing
hey, what lights did you use, the ZKYs? if so, take some fitment pics from inside the hood too, I'd like too see.
you can use either GTOs or the BMW brows, BMW brows need painting though.
here's mine
hey, what lights did you use, the ZKYs? if so, take some fitment pics from inside the hood too, I'd like too see.
you can use either GTOs or the BMW brows, BMW brows need painting though.
here's mine
#9
agreed
Originally posted by Chris91SE
you really need to do something about that grille...chrome with the bimmer lights and the black isn't cutting it
you really need to do something about that grille...chrome with the bimmer lights and the black isn't cutting it
just a thought (actually Chris' thought )
#11
Originally posted by JDwyer2821
Yeah did you use the ZKW euro BMW lights? I would like to know how you fit the huge rear in if you used the ZKW,s. Maybe have someone warn me on what not to do
Yeah did you use the ZKW euro BMW lights? I would like to know how you fit the huge rear in if you used the ZKW,s. Maybe have someone warn me on what not to do
http://www.angelfire.com/clone/wokfu...oid/Bosch3.jpg
My ellipsoids are on their way, I should have them in anytime now
#12
Originally posted by ngthing
I've checked out pictures of both the ellipsoid and the parabolic ZKW and Boschs. The rears look about the same size, so they should fit...how much work is required...is another thing I know that the ellipsoids have been fit successfully in the past.
http://www.angelfire.com/clone/wokfu...oid/Bosch3.jpg
My ellipsoids are on their way, I should have them in anytime now
I've checked out pictures of both the ellipsoid and the parabolic ZKW and Boschs. The rears look about the same size, so they should fit...how much work is required...is another thing I know that the ellipsoids have been fit successfully in the past.
http://www.angelfire.com/clone/wokfu...oid/Bosch3.jpg
My ellipsoids are on their way, I should have them in anytime now
#13
Originally posted by maxima_dumby
i was told that the ZKW is at least an inche to an inche and a half deeper then the ellipsoids, but i think it should be that much of a problem. So ngthing what are you gonna to do with the set of e36 lights that you already have on
i was told that the ZKW is at least an inche to an inche and a half deeper then the ellipsoids, but i think it should be that much of a problem. So ngthing what are you gonna to do with the set of e36 lights that you already have on
If you look at the picture I linked, you'll see what is "extra" on the ellipsoids. My e36 lights /w projectors and HIDs are for sale, $550 for the full set.
#15
Originally posted by maxima_dumby
well i got myself a set of ZKW right now
and i am seriously gonna try to install them tomorrow. So i'll post something up for those who cares and tell ya'll how it went for me.
well i got myself a set of ZKW right now
and i am seriously gonna try to install them tomorrow. So i'll post something up for those who cares and tell ya'll how it went for me.
if you're interested, I've got a set of JP demon eyes, the same set I'm sticking in my car (basically, the top of the line) angel eyes fit for the ZKs, $210 shipped ($350 + ship, retail), I'd be wiling to cut you a deal/trade, email me, jng@annulardesign.com, or IM me.
#16
Originally posted by maxima_dumby
i was told that the ZKW is at least an inche to an inche and a half deeper then the ellipsoids, but i think it shouldn't be that much of a problem. So ngthing what are you gonna to do with the set of e36 lights that you already have on
i was told that the ZKW is at least an inche to an inche and a half deeper then the ellipsoids, but i think it shouldn't be that much of a problem. So ngthing what are you gonna to do with the set of e36 lights that you already have on
#18
The box is 18X12X12 Also You can notice that this has to be installed as a whole unit! http://images.cardomain.com/installs...63_22_full.jpg
#22
this might help
try painting the rubber above your headlights. thats what i did when i got my car repainted. i will get some pics of it today if i can. my car looks so sweet. all i have left to do is sand and buff the paint. then add the side marker lights, hyper white fogs, and washer lights back on when the paint has cured. then repaint the trim, and repaint the calipers later. Wait till i get my grill done. It will look so much better.I dont think anyones max can touch mine after i get done. as far as looks! but thats my opinion.
#24
Originally posted by cbrflyer919
Ngthing, Give me some info on the HID's on the lights, 9005,9006? age, brand, etc... also are you selling the lights with the max's brackets? I'm especially interested if so.
Ngthing, Give me some info on the HID's on the lights, 9005,9006? age, brand, etc... also are you selling the lights with the max's brackets? I'm especially interested if so.
#27
Originally posted by skatanic28
so some of you guys are using the ellipsoids?
those look so damn good
i saw a m3 in montreal yesterday with em and i could definately go for that
there probably a ton of cash though right>?
so some of you guys are using the ellipsoids?
those look so damn good
i saw a m3 in montreal yesterday with em and i could definately go for that
there probably a ton of cash though right>?
Thread
Thread Starter
Forum
Replies
Last Post
rocketshipon19"
5th Generation Maxima (2000-2003)
28
05-12-2001 08:14 PM
compu_squid
5th Generation Maxima (2000-2003)
24
12-21-2000 09:24 AM