side exhaust project is under way finally
#1
side exhaust project is under way finally
Hey everyone, some of you may remember but I have finally gotten the chance to begin my side exhaust project for the maxima...needed time and some extra parts to come in. Here is how the set up will work. I have a budget b pipe w/ res. and the b pipe is in 3 parts (it bolts together in the middle) I need to remove the muffler and the part of the b pipe which connects to the muffler. I have a flowmaster muffler w/ single inlet on one end and dual outlet on the other. I purchased some mandrel bent piping from a shop around here and 2 sets of dual tips. The stock b pipe had to be cut apart for flanges, I cut the flange off the front of the stock b pipe that attaches to the cat and put that on the muffler so it will now be bolted up to the buget b pipe. The piping then obviously comes out of each outlet port and runs over the the side of the car and the tips are at the edge of the body right before the rear wheels. There will be a hanger attached to the underside to support each of the tips. Now for the muffler, if you look under your car you will notice there is a bar running under the b pipe infront of the gas tank. Mine kind of broke off due to problems I had, and The muffler is going to be supported right there with a new bar that sits lower to accomodate the size of the muffler. I will have some pics soon of everything! It's going to be very unique! I'll keep you guys posted with how it all goes. And yes I know its illegal to have this side exhaust becuase there are 4 doors blah blah.... Thanks!
Justin
Justin
#5
Originally posted by mzmtg
newmann, that would help a lot let me know when you get the mig in and I'll get the rest of my stuff together
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
7
05-16-2021 11:18 AM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM