KNOCK Sensor Changed~!
KNOCK Sensor Changed~!
I just would like to thank www.skippynet.com for The guidance, and what tools to use. I tried myself before looking at any directions and WOW, i had no luck. I'm a 6'6'' dude, and i Have HUUUGE hands. I got me a 14'' extension and a swivel socket, and within half an hour, and one tiny cut on my hand, I had Succeeded! upon checkin the ecu? 0505! 
Thank you skippynet and maxima.org...I CANT WAIT TO TEST DRIVE!

Thank you skippynet and maxima.org...I CANT WAIT TO TEST DRIVE!
Originally Posted by vsamoylov
no, i didn/t mean that the car blew up. i meant di the engine detonate, misfire,. My engines detonates on low gas like 87 here in ca, but runs perfect on 91. on 87, the valves hit the top of the piston and that is detonation.

uhmmm, NO dude.....
You wouldn t want your piston to hit the valves, cause you d call www.car-parts.com and look for a new engine . Sometimes , silence is golden 
Is always good to use the best octane if available. If you use 87 ,you ve got the answer to your problem ...

Is always good to use the best octane if available. If you use 87 ,you ve got the answer to your problem ...
Originally Posted by spanishrice
I thought we could onyl use 92 and above?
when i used to do that with the bad knock sensor, the car would hardly chirp its tires!gas milage has improved as well.. With a fair amount of hard driving, I am down to about 3/4 of a tank, with 110miles on the trip odo...
Originally Posted by vsamoylov
no, i didn/t mean that the car blew up. i meant di the engine detonate, misfire,. My engines detonates on low gas like 87 here in ca, but runs perfect on 91. on 87, the valves hit the top of the piston and that is detonation.
Guest
Posts: n/a
yeah, i know that iti s bad. And the only things that come to my mind to I can stop that is use higher gas, which works but expensive in ca, replace knock sensor, I haven't tried that yet, and go to Nissan and ask then if the can decrease timing about 2 degrees, haven't tried that yet either.
Just replaced my knock sensor with new one, but cannot get resistance reedings from the other end of the harness, it shows nothing.
It looks like the wire in harness is ripped at some point, or what could it be????
I heard harnesses are quite expensive, up to 90 bucks, is that true???
Opinions Welcomed!!!
It looks like the wire in harness is ripped at some point, or what could it be????
I heard harnesses are quite expensive, up to 90 bucks, is that true???
Opinions Welcomed!!!
Originally Posted by kevlo911
VLad i can't read mine either but i don't have a ghost code stored in the ECU anymore so check ur codes. i felt a increase in power and i noticed more MPG
Thread
Thread Starter
Forum
Replies
Last Post
sdotcarter
6th Generation Maxima (2004-2008)
2
Sep 2, 2015 09:53 PM




