how do you take out fog lights in a 4th gen?

do you just use a flat head and pop them out and disconnect the wire? or are there screws somewhere i need to unscrew?

 

Take em out and mail them to me

 

With a hammer.

 

Should be in your owners manual. I have a 95, so my method won't work, maybe it's the same concept, but I don't know.

Pop off piece of plastic, loosen bolt, and from there on, it's up to you.

 

there should be a screw or 2 on teh inner side and then on the outterside there a pop thingy that you need a screwdriver for...and the then all you gotta do is take off the harness, its easy but that pop-out **** mite me a lil tough...

 

on the front of the fogs there is a rectangle piece taht you pry upwards on and it will come out. then there is a 10mm bolt that you take out and the fogs come right out.

 

ok its a 97.....use a phillips head and loosen the 3 screws....then pull out and proceed to do w/e u needa do.

 

the fogs are mounted differently on a 97 compared to a 95?

 

That's for a 1995, he has a 97+

 

if you just look at it and try at you will get it and you will learn more than you d by someone just telling you. Just go out and do it...i bet you have not even looked at it yet cause if you did ti wouuld be a simple task....

take some time and go find out.

 

yeah, i tried takin my 95 ones out with a philips, i stripped the screw, then i thought about drilling it out....right when i was about to do it, i had second thoughts, then i went out and bought a socket extension, and used a 11mm....(i may have used the wrong one, A32Matt said its a 10mm) but anyway...i got it out, but...this doesnt apply to a 97 and i duno why i posted this......

 

This is how a lot of us learned, takes less time and is less confusing.

 

look at it and figure it out, if u cant do that then look at your owners manual