2k2 hid install w/ pictures and write up
#41
so i wanna know who on here is running hid's w/o a retro fit????????? and nismo how'd you make that harness pm me. i love the new light out put of my hid's and have seen stock hid's that are brighter then the new setup
#43
Originally Posted by azmaxipad
so i wanna know who on here is running hid's w/o a retro fit????????? and nismo how'd you make that harness pm me. i love the new light out put of my hid's and have seen stock hid's that are brighter then the new setup
#45
yes it seems like alot of time but it really isn't i had a free day and i wanted it to be done right the first time. I took my time aligned everything removed the housing to mount the ballasts. of course there was rtv drying time and drive time to get the new halogens after i broke one of the bases. but just like retro fits i know that will take me a good portion of a day due to the fact that i won't be happy til it looks like it came on the car
#46
I was running 6000K hid's without a retro since 2001.
No problem.
When you hit the switch igniter gives out 23,000 volt to ignite the bulb.
That 23,000 volts is accumulated bit-by-bit from the battery before the ignition.
When it's ignited, HI voltage is going OFF and LOW voltage from the battery is still ON
During all those steps it's not exceeding 35W, so it's not going to MELT wires.
No problem.
When you hit the switch igniter gives out 23,000 volt to ignite the bulb.
That 23,000 volts is accumulated bit-by-bit from the battery before the ignition.
When it's ignited, HI voltage is going OFF and LOW voltage from the battery is still ON
During all those steps it's not exceeding 35W, so it's not going to MELT wires.
#47
^^Wrong.
There is no way the igniters can accumulate the voltage "bit by bit", because the hid's have no source of power other than the stock harness. And when the headlights off, there is no power going to the hid's at all.
There is no way the igniters can accumulate the voltage "bit by bit", because the hid's have no source of power other than the stock harness. And when the headlights off, there is no power going to the hid's at all.
#48
Originally Posted by Nismo3112
I was running hid's without a retro, but now I am in the process of retrofitting some projectors. Can't wait till its done!
same here i have E46 (or E55 i can't remember) projectors, BMW ballasts new headlamps and new 4100k burners. i just need help making them. i don't wanna n00b my way thru it and ruin these expensive parts.
i'm still runnin my HIDs w/o a retro.
#49
Originally Posted by 98i30
I was running 6000K hid's without a retro since 2001.
No problem.
When you hit the switch igniter gives out 23,000 volt to ignite the bulb.
That 23,000 volts is accumulated bit-by-bit from the battery before the ignition.
When it's ignited, HI voltage is going OFF and LOW voltage from the battery is still ON
During all those steps it's not exceeding 35W, so it's not going to MELT wires.
No problem.
When you hit the switch igniter gives out 23,000 volt to ignite the bulb.
That 23,000 volts is accumulated bit-by-bit from the battery before the ignition.
When it's ignited, HI voltage is going OFF and LOW voltage from the battery is still ON
During all those steps it's not exceeding 35W, so it's not going to MELT wires.
#50
Originally Posted by queenambeach
People like you make me laugh. Just because your harness hasn't given out yet doesn't mean it won't. Dude check this out. It's simple laws of phsyics. You're running more current and heat through a wire than it's rated for. What do you think will happen over time? If you don't believe me, call Nissan!! I can't wait till your harness melts, then tell me if it's BS!
EDIT.
i've had HIDS w/the same stock harness for 3 years without any problems at all. I'm not completely sure about the whole process, but since HID bulbs draw out less current than stock halogen bulbs (55w vs 35w...which makes HID bulbs cooler than halogen bulbs) wouldn't the current going through the harness be less?
#52
HID's powered off the stock wiring will melt your wires. Just because it hasn't happened yet doesn't mean it will never happen. The sudden amp surge slowly degrades the entire headlight harness. It's just like runnung 87 octane, sure you can do it but over time it kills the engine. I'm a DC Power Technician we see this stuff everyday. Hopefully the graph will help.
#53
Member who somehow became The President of The SE-L Club
iTrader: (19)
Join Date: Jun 2001
Posts: 16,033
Originally Posted by queenambeach
What are you talking about?? How can 12 volt battery accumulate 23,000 volts? You are getting power from your stock harness. And the current overload an heat will eventually melt your harness!
HID's draw much less current then halogen bulbs do. The initial fire to ignite them is only a fraction of a second, then it's a 35W 12 volt system at work. Your electrical system does not need to work as hard to power HID's as it does to power filament bubls of the same wattage.
Converting your halogen lighting system to High Intensity Discharge, which is a more efficient lighting system, uses less power to produce more lumens of light.
That, queenambeach is a fact, please do some research before you post.
#54
Originally Posted by bravehart
HID's powered off the stock wiring will melt your wires. Just because it hasn't happened yet doesn't mean it will never happen. The sudden amp surge slowly degrades the entire headlight harness. It's just like runnung 87 octane, sure you can do it but over time it kills the engine. I'm a DC Power Technician we see this stuff everyday. Hopefully the graph will help.
#55
Originally Posted by njmaxseltd
It's called a coil, same way your spark plugs fire at 30,000 volts.
HID's draw much less current then halogen bulbs do. The initial fire to ignite them is only a fraction of a second, then it's a 35W 12 volt system at work. Your electrical system does not need to work as hard to power HID's as it does to power filament bubls of the same wattage.
Converting your halogen lighting system to High Intensity Discharge, which is a more efficient lighting system, uses less power to produce more lumens of light.
That, queenambeach is a fact, please do some research before you post.
HID's draw much less current then halogen bulbs do. The initial fire to ignite them is only a fraction of a second, then it's a 35W 12 volt system at work. Your electrical system does not need to work as hard to power HID's as it does to power filament bubls of the same wattage.
Converting your halogen lighting system to High Intensity Discharge, which is a more efficient lighting system, uses less power to produce more lumens of light.
That, queenambeach is a fact, please do some research before you post.
Thread
Thread Starter
Forum
Replies
Last Post
dank4us
7th Generation Maxima (2009-2015)
34
06-10-2024 03:45 AM