4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Stumped... car won't start

Thread Tools
 
Search this Thread
 
Old Jun 7, 2005 | 05:33 PM
  #1  
lilgrebbie's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2003
Posts: 172
Stumped... car won't start

I drove my car to work today and it drove fine. I drove it home and it was fine again. twenty minets after I got home I got in my car and it wouldn't start. It wouldn't even make a noise. nothhing. It was like my clutch wasn't pushed in. I checked to make sure that the button that the clutch pushes in was in, and even held it by hand. same thing. i took out my starter and had it checked and it was good.
I replaced the started for the second time about 2 weeks ago. the plug in on the starter wouldn't go in right. i got it to go eventially, but I thought that it might have been the problem. I put a wire inbetween the two ends of the plugs and say if anything would happen, and I got nothing.
I have no Idea what else it might be. If you have any ideas plaese help me.
Old Jun 7, 2005 | 05:35 PM
  #2  
texasluva's Avatar
Senior Member
 
Joined: May 2004
Posts: 128
Check the Battery?
Old Jun 7, 2005 | 05:50 PM
  #3  
i30ds's Avatar
Armed and Dangerous
iTrader: (8)
 
Joined: Mar 2004
Posts: 4,412
From: Denver, CO
Ignition switch needs to be replaced... $20 part, 2 screws and and electrical connector and you are done.
Old Jun 7, 2005 | 06:19 PM
  #4  
lilgrebbie's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2003
Posts: 172
I checked the battery, put a charger on it it was fine I will check in to the igniton switch... thanks.
any other ideas in case that doesnt work?
Old Jun 7, 2005 | 06:56 PM
  #5  
killcrap's Avatar
I'm actually quite pleasant until I'm awake
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,672
No Start No Crank Condition.
1)check ignition switch
2)p/n safety switch
3)relay to starter
4)starter ground
Old Jun 7, 2005 | 07:23 PM
  #6  
dukelubas's Avatar
Org Lurker
iTrader: (10)
 
Joined: Nov 2004
Posts: 403
From: Philly
Whenever I've had this problem its been a poor connection at the battery terminal. Clean the connections and make sure they're tight.
Old Jun 8, 2005 | 05:45 PM
  #7  
lilgrebbie's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2003
Posts: 172
alright, I got home from work today and push started my car. I got it running fine but when I shut it off it had the same problem. I called around and found a ignition switch for $26. Put it in and things got even worst. it seemed to fit fine exept the connection was hard to get together for some reason. This is the same problem I had with my starter. Could it be just bad knockoff parts? anyway, I tried to start it and it wouldn't work. Even wost is that now my car won't even switch to "on". The key will turn but the dash lights like the check engine battery etc. won't turn on.
could this be some kind of security system thing?
I tried to put the old one back in and the same thing happened.
also the radio wouldn't work(Bose) it would eject the CD but wouldnt turn on.
any thoughts?!?!
really starting to get mad at my car.
any help greatly apreciated.
Old Jun 8, 2005 | 05:47 PM
  #8  
Frank Fontaine's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 3,879
Friend had a similar problem on a 2k1 Sentra. Finally gave up trying to figure it out and towed it to the dealership. $400 later he has a new wiring harness and the car has run like a top ever since.
Old Jun 8, 2005 | 05:58 PM
  #9  
lilgrebbie's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2003
Posts: 172
wow depressing.. but thanks
anyone else?
Old Jun 9, 2005 | 03:51 AM
  #10  
killcrap's Avatar
I'm actually quite pleasant until I'm awake
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,672
check battery ground, and also check fuses.
Old Jun 9, 2005 | 05:29 AM
  #11  
maxgtr2000's Avatar
KH3 by popular demand
iTrader: (29)
 
Joined: Sep 2004
Posts: 3,102
From: Detroit, MI
with your driver door open , manually "unlock" it with the key and then try to start it. I had a similar problem because I have dynamat on my doors, sometimes the latch won't "unlock" all the way. I get dash lights but it won't crank/start even with the clutch pushed in, it's a security thing I guess. I'm not even using the factory alarm but I think Nissan has something with the door lock that inhibits the starter if the door lock/latch is not in the fully unlocked position. It's worth a shot before you go wire harness shopping.
Old Jun 10, 2005 | 12:56 PM
  #12  
lilgrebbie's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2003
Posts: 172
Well I figured it out. When I was putting in the ignition switch I blew a buss fuse. $10 later I had it running. thanks for the help
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
Nov 24, 2018 06:09 AM
Btheman80
7th Generation Maxima (2009-2015)
8
May 1, 2018 04:03 PM
MAXSE5SPD
Other For Sale/Wanted
2
Aug 23, 2015 12:06 PM
BobMax
4th Generation Maxima (1995-1999)
1
Aug 15, 2015 12:35 PM




All times are GMT -7. The time now is 04:34 PM.