bendy

Why is my Maxima flooding after installing new injectors.

NmexMAX

iTrader: (22)

They probably aren't set right, you may need to go back and recheck all the o-rings/gaskets and see what kind of seal you're getting.

How do you know it's "flooding"?

How many did you change?

Jeff92se

iTrader: (82)

Thread title says "after replacing all 6 injectors".

PTownMax

iTrader: (5)

got a fuel pressure regulator to go with the injectors?
what kind and size are they?

NmexMAX

iTrader: (22)

I don't read titles
Why did you change all 6 ...

Jeff92se

iTrader: (82)

Who knows. But carefull about replying. If you don't hand this guy answers on a platter, he hits up your rep as negative.

bendy

I replaced all six just to make sure they were all working the same. I used rebuilt pythons, wich were supposed to be the same as the factoryn ones. I've never checked the fuel pressure regulator.

bendy

I got only 45 miles out of half a tank. the exaust blows lots of white smoke which smells like gas. The car runs like it's misfiring real bad at all speeds.

matty

iTrader: (54)

either take it back apart and check that all the O-Rings are seated properly..its sounds to me like the O-rings on the injectors arent seated properly or missing

If you dont want to take it all back apart, bring it to a macanic or nissan and have them look at it..

-matt

NmexMAX

iTrader: (22)

Any codes to go with this ...

Jeff92se

iTrader: (82)

I'll be nice. I can guarantee you didn't install the 0-rings correctly. Or used the old ones. You got gas flowing around the injectors and into the engine.

http://www1.autozone.com/servlet/UiB...3d801f5140.jsp

bendy

multiple misfire at first, I cleared it and haven't seen it again

bendy

when i changed the plugs, 1 &3 were soaked with gas

matty

iTrader: (54)

Start taking it all back apart...order Nissan O-rings...Make sure you put some oil on the O-rings before you push the injectors back into the fuel rail

-matt