300z BBK installed....can't move....
#41
Originally Posted by MaximaSE96
http://www.tirerack.com/wheels/tech/...jsp?techid=101
center of wheel to where the plate meets the face of the rotor hat
center of wheel to where the plate meets the face of the rotor hat
#43
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (54)
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by Akumachan
Next time I'm bored I'll find out what offset mine are, thanks for the info.
-matt
#44
Originally Posted by Akumachan
My rotors look exactly like the original posters, and we are both riding on 17x8 Fn01r-c's, so unless they made them in multiple offsets, which I'm not saying they didn't, then they should be the same.
FN01R-C come in at least 4 offsets in 17x8 to fit our lug pattern.
the 35mm fit just fine over my brake kits, but with the cobra rotors, they will need spacers.
#45
Originally Posted by Matt93SE
FN01R-C come in at least 4 offsets in 17x8 to fit our lug pattern.
the 35mm fit just fine over my brake kits, but with the cobra rotors, they will need spacers.
the 35mm fit just fine over my brake kits, but with the cobra rotors, they will need spacers.
#46
Originally Posted by Matt93SE
FN01R-C come in at least 4 offsets in 17x8 to fit our lug pattern.
the 35mm fit just fine over my brake kits, but with the cobra rotors, they will need spacers.
the 35mm fit just fine over my brake kits, but with the cobra rotors, they will need spacers.
The wheels I bought off an old .org member that wrecked his car for $800, and then I paid another $320 for all 4 tires and had a friend mount and ballance them for free. Getting 2 new tires today because my front are completely smooth, not even 1mm of tread left, so thats another $300 (friend cant do it for free anymore
![Tear](https://maxima.org/forums/images/smilies/tear.gif)
#51
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Ummm.....
Spacers are only needed if you don't have the right offset and spoke design on your rims.
I was well aware of the possibility before I started my project.
And who cares if the pad doesn't rub to the center of the rotor. The pad itself makes full contact and stops like mad.
Look at a Wilwood BBK - same thing.
Spacers are only needed if you don't have the right offset and spoke design on your rims.
I was well aware of the possibility before I started my project.
And who cares if the pad doesn't rub to the center of the rotor. The pad itself makes full contact and stops like mad.
Look at a Wilwood BBK - same thing.
#52
Originally Posted by iansw
Yeah - that's the idea.
I'm going to replace all the rear lug bolts with longer ones as well, even though some say you don't have to with 5mm spacers - just to be safe.
I'm going to replace all the rear lug bolts with longer ones as well, even though some say you don't have to with 5mm spacers - just to be safe.
ill prolly do that too......H&R spacers for the front....NISMO 50mm Studs for the rear with 5mm spacers...
thats what i like about Matts Kit...from pictures it looks like pads make it to center of rotor....and its only .4" diamter smaller
#54
Originally Posted by iansw
I think the H&R 5mm spacers come with new studs.
I'll find out for sure on Friday when they get here.
I'll find out for sure on Friday when they get here.
no u have to order sepately
#57
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally Posted by MaximaSE96
http://optionsauto.com/prodinfo.asp?number=HR1065662
no u have to order sepately
no u have to order sepately
I just got 2 boxes - 1 for the 15mm spacers and one for the 5mm spacers.
Both sets came with new studs. (20 total studs)
I can take pics if you need proof.
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#58
i beleive u ....it just says in the edescription u have to ordewr separately......are htey already in the spacer or do u have to put them in....or do they go in the hub itself...but i would like to see pics anyway just to see what i will be expecting
#59
Welcome to the 300ZX BBK club! I have a bit if a write up on my domain page 3 if anyones interested. I'm waiting for my second set of 15mm H&R spacers for the rear. BTW G35 18" coupe wheels don't require any spacers I tried one on at the dealer.
#60
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Just discs and seperate lug bolts.
I see now - there's several models sold.
http://www.optionimports.com/h-r-spacer.html
The DR Series does not come with bolts, the DRS (what my receipt says I bought) do.
Although that says 10-40mm, and these are 5mm....hmmmm.
I see now - there's several models sold.
http://www.optionimports.com/h-r-spacer.html
The DR Series does not come with bolts, the DRS (what my receipt says I bought) do.
Although that says 10-40mm, and these are 5mm....hmmmm.
#64
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Update:
Got them installed and WOW my braking power is so much better.
I expected it to lock up too easily and be hard to drive - but really it's not a problem once you get used to it....just brakes WAY more effectively in general....especially coming down from high speed.
One of the best mods I've done yet....
Got them installed and WOW my braking power is so much better.
I expected it to lock up too easily and be hard to drive - but really it's not a problem once you get used to it....just brakes WAY more effectively in general....especially coming down from high speed.
One of the best mods I've done yet....
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
maxfever1987
4th Generation Classifieds (1995-1999)
6
11-19-2016 08:01 PM
CHAZMAX
5th Generation Maxima (2000-2003)
33
01-29-2003 07:14 AM