GI:A32 JDM Cefiro Dual Piston Caliper w/ JDM Nissan Brake Pads
#1
GI:A32 JDM Cefiro Dual Piston Caliper w/ JDM Nissan Brake Pads
A32 JDM Cefiro Dual Piston Caliper w/ JDM Nissan Brake Pads
I had sold few of these and just want to put it out there and let ya'll know.
These are used in JDM Skyline R32, Silvia S13, Laurel and Cefiro A31, A32. I do not think this applies to A33 though..
Advantage:
Better Brake Response (2 Piston JDM Cefiro Front brake Caliper)
Cheaper upgrade - Can fit in Stock 15, 16" Wheels (Cheaper; so you don't need to upgrade your wheels, cheaper tires).
If you want a BIGGER Rotor, I can source a adaptor bracket later on.
Please see the photos for your reference:
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_196_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_195_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_186_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_187_full.jpg)
I had sold few of these and just want to put it out there and let ya'll know.
These are used in JDM Skyline R32, Silvia S13, Laurel and Cefiro A31, A32. I do not think this applies to A33 though..
Advantage:
Better Brake Response (2 Piston JDM Cefiro Front brake Caliper)
Cheaper upgrade - Can fit in Stock 15, 16" Wheels (Cheaper; so you don't need to upgrade your wheels, cheaper tires).
If you want a BIGGER Rotor, I can source a adaptor bracket later on.
Please see the photos for your reference:
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_196_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_195_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_186_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_187_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_188_full.jpg)
#2
more photos:
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_189_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_190_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_191_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_192_full.jpg)
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_193_full.jpg)
Please feel free to ask me any question you might have.
Working hard for both A32 Maxima/I30
Regards,
SY
sycefiro@yahoo.com
#5
Originally Posted by gtr_rider
Hey quick question Sy, would these use the factory brake pads? Also conversion brake lines are not necessary correct?
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
Right, regular stock brake lines are okay. I'd recommand to go with Goodridge SS Brake lines.
I am working on getting these along with SS brake lines..(but JDM SS lines are very expensive). Working on 'em right now.
No, they use the JDM Nissan Brake Pads... which will be included with this Dual Piston Caliper Kit.
You can use your A32 Stock size Rotor (OEM or aftermarket).
I was told that these will EVEN work with 15" Steel Wheels (GXE wheels with wheel covers)
Like I said.. if you are going bigger Rotors, it's possible. I am working on getting the adaptor brackets right now....
But you will need BIGGER wheels to make sure you have the caliper clearance.
Originally Posted by MyownNismo
how much are they. If the price is right I might try to see if the work on a A33.
These are FRONT's only.
I was reading that A33 has thicker rotors than A32, unless you want to use A32 Rotors... this is NOT recommanded... If you are doing an upgrade for A33, you might wanna consider going 6th Front Brake conversion.. BIGGER ROTORS, and 6th Gen Calipers.. but you will of course need BIGGER wheels to accomodate these
Hope this helps!
SY
sycefiro@yahoo.com
#7
Originally Posted by gtr_rider
Are these JDM brake pads readily available, because it would be terrible to have to only go through one source to get brake pads.
![flame](https://maxima.org/forums/images/smilies/flame.gif)
i.e.
Each Set of Caliper kits sold. I will stock 1 set available..
I personally use this for the past few years (finally decided to share my secret.. j/k)... So I usually have 1-2 sets of these brake pads available
SY
sycefiro@yahoo.com
![](http://memimage.cardomain.net/member_images/4/web/700000-700999/700415_171_full.jpg)
#15
Originally Posted by krismax
these look to be cast iron but are they aluminum? and also can we get a weight of one without the pads .thanks
4.6KG = 10.12 lb
I may also be able to provide bracket/adapters (as an option) to work with the following rotors (other than stock size)
303mm rotors =11.9 inch rotors
328mm rotors =12.9 inch rotors
If you go with larger rotors, then you would require to have Bigger wheels with correct off set to clear.
Originally Posted by Zack342
Do you have any pictures of the top view of the caliper? What is the piston Diameter?
Originally Posted by Ceffy Moe
hey i was wondering what db would the brake pads for a 2.0 1 pot cefiro?
i was guessing db1232
i was guessing db1232
#16
Originally Posted by Zack342
Do you have any pictures of the top view of the caliper? What is the piston Diameter?
![](http://memimage.cardomain.net/member_images/3/web/207000-207999/207042_351_full.jpg)
![](http://memimage.cardomain.net/member_images/3/web/207000-207999/207042_352_full.jpg)
![](http://memimage.cardomain.net/member_images/3/web/207000-207999/207042_353_full.jpg)
![](http://memimage.cardomain.net/member_images/3/web/207000-207999/207042_354_full.jpg)
This is after many years of salt/winter/rust... haha.. I know it looks horrible, but the performance is still excellent!
SY
Thread
Thread Starter
Forum
Replies
Last Post
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM
RealityCheck
4th Generation Maxima (1995-1999)
2
08-05-2015 06:18 AM