How to reprogram a new fob?
12-24-2007, 11:32 AM
#1
How to reprogram a new fob?
I just got a new fob, and i'd like to reprogram my keyless entry to work with the new remote. I remeber seeing the procedure in the sticky's somewhere, but now i can't find it 
.
I found something on nicoclub:
1.Get in & lock the doors
2.Insert the key into the ignition 6 times within 15 seconds
3.Hazard lights should flash
4.Put key back into the ignition & turn to Accessory
5.Press the master door lock (on drivers door arm rest) unlock/lock
6.Hit the lock button on the remote
7.Hazards should flash
8.Pull key out and open the drivers door and then close it
9.It should be set
Is this the right procedure?
.I found something on nicoclub:
1.Get in & lock the doors
2.Insert the key into the ignition 6 times within 15 seconds
3.Hazard lights should flash
4.Put key back into the ignition & turn to Accessory
5.Press the master door lock (on drivers door arm rest) unlock/lock
6.Hit the lock button on the remote
7.Hazards should flash
8.Pull key out and open the drivers door and then close it
9.It should be set
Is this the right procedure?
Last edited by heynow; 12-24-2007 at 11:36 AM.
. . . . . .
Thread
Thread Starter
Forum
Replies
Last Post
Omar Abdurrahman Siddiqi
5th Generation Maxima (2000-2003)
33
08-26-2016 05:18 PM