Plug and Play LED's 98-99 gauge cluster
08-23-2011, 10:58 AM
#121
well i finally got home last night and found out my leds had come in, i got the wled5s from superbrightleds.com heres the link..
http://www.superbrightleds.com/cgi-b...%2FWLED-x5.htm
i only see a few little hot spots but its not noticable sitting in the car, i only ordered 4 bc i didnt look at the back of my cluster before i ordered them.
i sent some back to them that werent the right type and once those go through ill get my last bulb for my fuel gauge.
what do yall think?
plus i didnt have to do anything to the needles for them to be seen VERY well.
http://www.superbrightleds.com/cgi-b...%2FWLED-x5.htm
i only see a few little hot spots but its not noticable sitting in the car, i only ordered 4 bc i didnt look at the back of my cluster before i ordered them.
i sent some back to them that werent the right type and once those go through ill get my last bulb for my fuel gauge.
what do yall think?
plus i didnt have to do anything to the needles for them to be seen VERY well.
Last edited by beatdown97; 08-23-2011 at 11:01 AM.
08-23-2011, 11:29 AM
#122
nycmaximas member
Join Date: May 2003
Location: Brooklyn, NY
Posts: 644
I havent done it but... I heard that If you get sand paper and sand the back of the needles the orange paint comes off leaving the needles clear. This makes them visible like the 95-97 Gauge needles...
08-23-2011, 02:09 PM
#123
i have the needles that are clear with the black sides.. i also have a set of red needles that are extra from another cluster that i cleared.
i didnt use sandpaper i used nail polish remover and mine came out clear as day but i still have the clear/black needles in there
i didnt use sandpaper i used nail polish remover and mine came out clear as day but i still have the clear/black needles in there
08-25-2011, 01:02 PM
#124
kinda like that? i have a full set of them that i was going to use until i lit up my cluster and my needles worked great. if anyone is looking for the needles im selling mine .. just make me an offer
08-25-2011, 09:43 PM
#126
Junior Member
Join Date: Jan 2011
Location: West Chicago, Illinois
Posts: 26
So I've searched & searched & I cant find anywhere, where they mention the bulb size for the turn signal,check engine light etc..etc..for the guage cluster. Does anyone one kno what they would be?
[/SIZE]
08-26-2011, 08:50 AM
#130
Seriously? Did you even look IN THIS THREAD? Also, his car has digital gauges and the lights wont fit in yours, you would also have known that just by reading the info in this thread
08-26-2011, 02:48 PM
#131
See my sig? Has a mod list... Click it.... All mysteries shall be answereeeeddddd~~~
Last edited by aackshun; 08-26-2011 at 03:05 PM.
08-28-2011, 08:31 PM
#133
Junior Member
Join Date: Aug 2011
Posts: 65
soo my neo5's came in .........they dont fit my cluster lol so i used them on my blinkers and high beam lites in the cluster and went to pep boys and got some leds from there completely diferent bulbs of course they only had 4 bulbs at pep boys so i need to wait till thursday to finish ill post a pic when its done 95 max with 96 gauges
95-97 just use a 194 bulb in the clusters guys no specific bulb you can get them at autozone bright white led or if you want red/green you have to stick with standard bulbs instead of led i have it done with mine but no way to put up pics currently.
08-28-2011, 09:03 PM
#134
08-29-2011, 09:17 AM
#135
the bulbs that i used for my cluster(97) was the wledx5 in blue i dont think i even needed the hp leds in mine.. it looks great IMO
10-26-2011, 05:32 PM
#136
ok i jus put in my blue led cluster lights and now that it is dark out i've notice i cant see my gauge needles because the blue is to bright....is there anyway i can make the needles stand out ???
11-25-2011, 07:51 AM
#137
97 mechanical gauge cluster
Questions:
Will WLED-x5 work plug 'n play in a '97 gauge cluster?
How many bulbs do I need for the entire gauge cluster?
Are all bulbs in the '97 gauge cluster the same part number?
Is the "LOW FUEL" bulb the same WLED-x5?
Will the dimming feature work with LED's?
Thanks
Will WLED-x5 work plug 'n play in a '97 gauge cluster?
How many bulbs do I need for the entire gauge cluster?
Are all bulbs in the '97 gauge cluster the same part number?
Is the "LOW FUEL" bulb the same WLED-x5?
Will the dimming feature work with LED's?
Thanks
06-07-2012, 10:46 PM
#139
buy 5 of each, you'll find out
OR, you can go to the FIRST POST of this thread, and look down until the FIRST thing you see that is UNDERLINED, that gives you your answer!
06-07-2012, 11:25 PM
#140
It sucks a 98 digital cluster can't take the 194 LED as I think they offer it in a brighter white (3500K). I have the cool white in my 98 digital gauges and it's not superbright and has a blueish hue to it. I wanted a solid bright pure white.
They need to make the these in warm white!
http://www.superbrightleds.com/cgi-b...pecs%2FNEO.htm
They need to make the these in warm white!
http://www.superbrightleds.com/cgi-b...pecs%2FNEO.htm
Last edited by VisciousMo; 06-07-2012 at 11:27 PM.
06-08-2012, 07:44 AM
#141
It sucks a 98 digital cluster can't take the 194 LED as I think they offer it in a brighter white (3500K). I have the cool white in my 98 digital gauges and it's not superbright and has a blueish hue to it. I wanted a solid bright pure white.
They need to make the these in warm white!
http://www.superbrightleds.com/cgi-b...pecs%2FNEO.htm
They need to make the these in warm white!
http://www.superbrightleds.com/cgi-b...pecs%2FNEO.htm
07-09-2015, 05:11 AM
#142
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
CAN-Toronto 97 SE BLACK w/ BLACK. PART OUT.
worldwiderecognized
4th Generation Classifieds (1995-1999)
2
09-24-2015 06:56 PM