J2songz

For a few days my car has be stalling out and I didn't know the cause of it, lucky I keep my scanner on me because going 80mph and stalling out is not to fun with cars behind you.

So once it stalls its hard to get is started or if it did start it will stall again so I had to keep reseting the ECU to get the car home. I figured the issue was a broking MAFS because I broke something on it awhile back. After checking everything out I decided to replace the filter which was dirty, cleaned the MAFS and cleaned the TB. I had some oily like crap in my intake tube. I put it all back together and started right up, also had some power gain returned and better TB response, it hasn't stalled so far.
But I do need to replace my MAFS soon
Hope this helps some1 with the same issue

clive

Stalling at 80 mph is not likely to be the MAF. Just possibly, if the MAF plug/socket connector is going intermittent, but no, more likely a crank position sensor, that's a prime cause of suddenly conking out. Same problem on Altimas. Replace both.

J2songz

I scanned it for the code and it was just the P0100, my intake wasnt getting the proper air flow. It had the same affect as if 1 of my vac lines was being clogged but i fixed it and its running strong now with no issues