Ultimate Headlight Quad Retrofit Build (HIDs, LEDs, oh my)
#1
Ultimate Headlight Quad Retrofit Build (HIDs, LEDs, oh my)
First let me say it's been over a year since I've logged onto this website and man it feels nice to be here. It's been about 2 years now since my 97 i30t was totaled and replaced with a 2011 Nissan Juke. And as an active contributing member to the JukeForums, let me tell you with utmost sincerity how incredibly fantastic and superior this forum website is over the total crapbucket that is autoguide forums. Loved this place and the people here... Anyways, so the reason for my return is....
I'm here to present to you my latest headlight build, a true throwback to my roots. Having had a 97 Maxima and a 97 i30t w/custom headlights, my first full custom build was for my buddy's 99 Maxima which led to many other builds which eventually spiraled out of the Maxima gang and now makes up a significant portion of my shop's business for a variety of makes/models. Fantastic stuff. I've attached some glamour pics for your enjoyment:
And here's a link to the YouTube video:
Equipment utilized in this build:
Quad Morimoto MH1 Projectors
Morimoto 35W HID System (x4)
MX5-R Switchback Shrouds
Gloss Black Painted Interior
Custom Acrylic Inserts
Profile Peak Switchback LED Bulbs
Exterior Clearcoat
I'm here to present to you my latest headlight build, a true throwback to my roots. Having had a 97 Maxima and a 97 i30t w/custom headlights, my first full custom build was for my buddy's 99 Maxima which led to many other builds which eventually spiraled out of the Maxima gang and now makes up a significant portion of my shop's business for a variety of makes/models. Fantastic stuff. I've attached some glamour pics for your enjoyment:
And here's a link to the YouTube video:
Equipment utilized in this build:
Quad Morimoto MH1 Projectors
Morimoto 35W HID System (x4)
MX5-R Switchback Shrouds
Gloss Black Painted Interior
Custom Acrylic Inserts
Profile Peak Switchback LED Bulbs
Exterior Clearcoat
#2
How do you aim the projectors? Ive got mini h1s and butyl adhesive holding the projectors into my skyline style 1 peice headlights but I haven't come up with how I'm going to aim them, if I manually aim them they sag down the butyl doesn't hold them at the angle i aim them. I love my projectors though they make the car look so much nicer imo
#5
Then there's different kinds of shroud options and halos. I think I spent ~$350 on my setup using all new stuff from TRF except eBay remote control rgb halo rings
#7
#13
lolz you guys are funny.
let's see ... uhhhh... okay, so ya'll figured out how to read the video description for pricing as well as components utilized. So that's all addressed.
I've been quite busy lately so the build log still isn't published on the website but when it is you will perhaps understand the price point. This is a deceptively simple looking build that is anything but a standard install.
Yes, you can mount a MH1 in the low beam position via the shaft mount which is a very entry-level / DIY retrofit. You will not be able to properly shaft mount any full sized projector in the high beam location due to clearance issues. You will not be able to utilize the X5R shrouds in either high or low beam location without significant clearance issues. As well as countless other challenges that make this build rather prohibitive to anything but an experienced builder. I enjoyed it thoroughly.
Headlights are adjusted utilizing the original standard adjustment screw just like normal. Butyl should not be used inside the housing for any reason.
<3
let's see ... uhhhh... okay, so ya'll figured out how to read the video description for pricing as well as components utilized. So that's all addressed.
I've been quite busy lately so the build log still isn't published on the website but when it is you will perhaps understand the price point. This is a deceptively simple looking build that is anything but a standard install.
Yes, you can mount a MH1 in the low beam position via the shaft mount which is a very entry-level / DIY retrofit. You will not be able to properly shaft mount any full sized projector in the high beam location due to clearance issues. You will not be able to utilize the X5R shrouds in either high or low beam location without significant clearance issues. As well as countless other challenges that make this build rather prohibitive to anything but an experienced builder. I enjoyed it thoroughly.
Headlights are adjusted utilizing the original standard adjustment screw just like normal. Butyl should not be used inside the housing for any reason.
<3
Thread
Thread Starter
Forum
Replies
Last Post
yellow_cake
4th Generation Maxima (1995-1999)
30
05-14-2015 08:03 PM
Genes1s
5th Generation Classifieds (2000-2003)
6
10-12-2014 08:33 AM
Genes1s
5th Generation Classifieds (2000-2003)
50
09-21-2014 08:05 PM
L_U_D_I_AMaxima
5th Generation Classifieds (2000-2003)
7
03-21-2012 11:25 AM