Qs about Stillen Front lip....
#1
Qs about Stillen Front lip....
How much of the stock bumper does the lip cover? I am curious because I have a pretty mean scrape at the very bottom of my front bumper on the pass. side. I was thinking maybe a stillen lip would cover it.
Ted
Ted
#2
Guest
Posts: n/a
The lip covers the whole bottom part of the lower valance. If you look below the bumper you see the lower intake. The spoiler sits on top of the lower part, covering it and it wraps around as well, hiding the stock chin.
The spoiler is held on by double sided tape and rivets. If your car is already lowered then you'll have to adapt to a different way of driving in and out of parking lot ramps as well as the odd speed bump.
The spoiler is held on by double sided tape and rivets. If your car is already lowered then you'll have to adapt to a different way of driving in and out of parking lot ramps as well as the odd speed bump.
#4
Guest
Posts: n/a
Here's a so-so frontal shot of my Max with the lip:
http://imagem.webphotos.iwon.com/100...M0.1616785.jpg
http://imagem.webphotos.iwon.com/100...M0.1616785.jpg
#5
Originally posted by BlkCat
Here's a so-so frontal shot of my Max with the lip:
http://imagem.webphotos.iwon.com/100...M0.1616785.jpg
Here's a so-so frontal shot of my Max with the lip:
http://imagem.webphotos.iwon.com/100...M0.1616785.jpg
#10
Originally posted by justmax
I see one of you guys has a 95-96 and one has a 97-99 front fascia... was there any modification needed to make the lip fit on either car?
Thanks,
Justin
I see one of you guys has a 95-96 and one has a 97-99 front fascia... was there any modification needed to make the lip fit on either car?
Thanks,
Justin
#11
Guest
Posts: n/a
Originally posted by MAXTOUT
Thanks BlkCat, that pic has answered my question.
I agree with JDM, your grill looks nice. If you don't mind, how did you do it? Is it gutter mesh from HD?
Ted
Thanks BlkCat, that pic has answered my question.
I agree with JDM, your grill looks nice. If you don't mind, how did you do it? Is it gutter mesh from HD?
Ted
#12
Originally posted by WizzaMax
Also interested in the response to this one...I cannot figure where the measurements are off and require a diff style front spoiler.
Also interested in the response to this one...I cannot figure where the measurements are off and require a diff style front spoiler.
FYI
#13
hey blkcat , anyone with the lip on. i have a question about the top of the ends of the lip, on the car the fender flares a bit around the wheel well, does the lip fit tight over this? im tryin to test fit and i jus noticed this
#14
I know they are different parts and all but not sure what characteristics on the actual bumpers are different that REQUIRE a different part...are they longer on one model than the other...? ... is one shaped that much different?
#15
Guest
Posts: n/a
Originally posted by sil SE
hey blkcat , anyone with the lip on. i have a question about the top of the ends of the lip, on the car the fender flares a bit around the wheel well, does the lip fit tight over this? im tryin to test fit and i jus noticed this
hey blkcat , anyone with the lip on. i have a question about the top of the ends of the lip, on the car the fender flares a bit around the wheel well, does the lip fit tight over this? im tryin to test fit and i jus noticed this
#16
thanks. its jus that the groove around the wheel well on the fender kinda pops out the lip but i think itll be ok. the test fitting is SUCKing and i guess i need heat or something to form fit it but im going to leave it to my body/paint guy to do it ..25-30 bucks sound not too bad? i wanted to do it but oh well its a hassle
Thread
Thread Starter
Forum
Replies
Last Post