Xtec foglight 6000K HIDs installed! *PICS*
#122
dude... each to his own. The fact remains though, that by the physical properties of light transmittance and the way the human eye works, yellow light will "see" through fog better.....I didn't say everyone should get them, I'm just saying that there are KNOWN scientific ways that this has/can be proven...I would think as a person who sells lighting you would know that.....but people gotta do what they want to do...most people aren't worried about fog. But obviously I can understand you're trying to sell HID fogs, so you're not going to say that yellow are better.....
#124
Hey you bought the plug and play kit where you just simply cut and rewired the stock harness to the male end of the connector right?
Now I read a couple posts on HIDPLANET and they say it should be used with a relay and run the power straight to the battery to ensure the wire from melting.
Is this what you have to do?
If not how has it been holding up anyone with this please reply, thanks!
By the way I ordered a test KIT in H3 and is test installing it on my fogs because I am saving the headlight for a retrofit w/ projectors. Anyone who has been waiting on the answer about my little group deal wait a bit longer. I want to assure that the supplier I am getting this from supplies quality products, so I am testing this before I am selling this to you. I will post pics with results within this week. Thanks for waiting.
Now I read a couple posts on HIDPLANET and they say it should be used with a relay and run the power straight to the battery to ensure the wire from melting.
Is this what you have to do?
If not how has it been holding up anyone with this please reply, thanks!
By the way I ordered a test KIT in H3 and is test installing it on my fogs because I am saving the headlight for a retrofit w/ projectors. Anyone who has been waiting on the answer about my little group deal wait a bit longer. I want to assure that the supplier I am getting this from supplies quality products, so I am testing this before I am selling this to you. I will post pics with results within this week. Thanks for waiting.
#125
Have you gotten any glare of blinding the cars in front of you?
Also how does the fog look on the side, did any light leak out of the housing?
I am getting one installed and I would like to know, did you also use relay to drive the power or did you just tapped into factory harness.?
Also how does the fog look on the side, did any light leak out of the housing?
I am getting one installed and I would like to know, did you also use relay to drive the power or did you just tapped into factory harness.?
#129
Originally Posted by maximillien
Have you gotten any glare of blinding the cars in front of you?
Also how does the fog look on the side, did any light leak out of the housing?
I am getting one installed and I would like to know, did you also use relay to drive the power or did you just tapped into factory harness.?
Also how does the fog look on the side, did any light leak out of the housing?
I am getting one installed and I would like to know, did you also use relay to drive the power or did you just tapped into factory harness.?
don't waste your time trying to contact umnitza. they used to sell xtec but they don't support them anymore.
#132
can someone send me a pm so I can hook up my max please!!! I want the hid fogs and and it just happens that i need new xenon bulbs for my max, one is going bad. Also will the fogs be a problem if one the the glasses is cracked? thanks
#134
Originally Posted by djbonsu
Needless to say but, the fogs are sick!!!.... ....
how would you rate the install??.....difficutly??....time??
how would you rate the install??.....difficutly??....time??
#136
Here is my fogs in 6000k but not by xtec.
Install was not bad, but I found out you would need to run 2 grounds for my 01 from the inside of the cap to the other ground supplied with the oem harness. H
Hardest part was mounting the ballast upside. I HATE DOUBLE SIDED TAPE. ANyone with side skirts feel my pain.
Install was not bad, but I found out you would need to run 2 grounds for my 01 from the inside of the cap to the other ground supplied with the oem harness. H
Hardest part was mounting the ballast upside. I HATE DOUBLE SIDED TAPE. ANyone with side skirts feel my pain.
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM