When ever i go over 30-40mph i get a humming kinda noise from my wheels
#2
sounds like a bad bearing. Have a shop check it out or try to wiggle the wheel with the car jacked up and see if there's any play. Maximas are infamous for wheel bearings going bad. I replaced one of them a couple months ago.
#7
at frist it only came from the back but now i think its comign from the front n i also notices my suspension sucks when i hit pot holes i hear and feel them more.....No performace tires just the stock tires for the 17" rims
#8
I agree with Irish, but it could be the tires. I am having the same issue, but I havent had a chance to check it out. Wheel Bearing are odd , noises could come and go but once the start to go they should be replaced. If the car is on a lift, to check the bearing, grab the tire at 12 and 6 o'clock and shake back and forth, if there is play it is the bearing. Otherwise rebalance the tires. if the tires are old another possiblity is tread wear.
#11
I have the same problem with my HTR+'s. I've checked my wheel bearings and that doesn't seem to be the problem. I'm gonna get an alignment and get the wheels balanced to see if that fixes anything.
#12
Originally Posted by PaulyPoTz
Everytime i go over liek 30mph i get a humming noise from my wheels. Is that normal?
i had exactly the same issue as you ...went through all the things i could think about .. re balanced the wheels, thought it was the tires.. i waited till i changed them the noise was still there.
went to teh shop ....it was bad wheel bearing in my front right side and back right side.
before you go crazy ... just change the wheel bearings
WHY DOES NISSAN MAKE SUCH CRAPPY PART?
#13
the front can be a little more costly. I would not simply get new wheel bearings as a matter of deduction. Do what the other guys said and shale the tire. I just replaced a bad one but the noise and vibration is still there. Sounds like rubbing metal and it sounds like it is coming from the front. I am frustrated also because I just channged a bad one out and I may have to do another one!. The rears are a DIYer but I believe the fronts you need to press in with a hydrolic press
Mark
Mark
#16
Recently I've noticed progressivly sloppy handling, but no vibration. Initially I thought it was from the 4 blizzaks I put on. While changing my oil filter I realized the the right front wheel would freely move back and forth up and down. I thought I had bad bearings. Took the wheel off and the freakn axle nut was almost all the way unthreaded to the cotter pin. (why doesnt Nissan use castle nuts!) Any way I torque the nut and now I have the same humming noise. only 30k
Thread
Thread Starter
Forum
Replies
Last Post
ballerchris510
5th Generation Maxima (2000-2003)
6
09-11-2015 05:29 PM