2004 brakes on 2000-2003 ???
#42
#43
Originally Posted by 03blk6mt
So here's another question on this subject with a twist: Since the new Alty SE-R has 12.6 inch rotors as well (and cooler looking calipers than the 6th gen Max), does the same philosophy hold true??
is there any difference in brake pad size on the Alti SE-R or the 04 Max? the last time i went to the dealer i didnt have a chance to look at both side by side.
#44
Originally Posted by DAREN
is there any difference in brake pad size on the Alti SE-R or the 04 Max? the last time i went to the dealer i didnt have a chance to look at both side by side.
I just emailed Dave B on rough prices for the SE-R calipers and rotors.
#45
Originally Posted by 03blk6mt
I don't think there would be that much of a difference in pad surface area between the SE-R and the new Max. But there is no doubt that Nissan WANTS their "sporty sedan" to be the Alty!
I just emailed Dave B on rough prices for the SE-R calipers and rotors.
I just emailed Dave B on rough prices for the SE-R calipers and rotors.
#49
UPDATE: Dave B replied on the prices for the SE-R calipers and rotors and here it is:
Chris-
I can get the calipers for $108.20 per side, the front rotors are $83.70 each. I know the rotorswill fit thehubs, but I'm unsure on the calipers. You can give me a call @ 888-254-6060.
Thanks!
David Burnette, South Point Nissan
Now if we can just get one to do a side by side with an 04-05 Max caliper to see if the mounting holes are the same.
A lot less than $790 that's listed on the Mossy Performance site.
Chris-
I can get the calipers for $108.20 per side, the front rotors are $83.70 each. I know the rotorswill fit thehubs, but I'm unsure on the calipers. You can give me a call @ 888-254-6060.
Thanks!
David Burnette, South Point Nissan
Now if we can just get one to do a side by side with an 04-05 Max caliper to see if the mounting holes are the same.
A lot less than $790 that's listed on the Mossy Performance site.
#51
Originally Posted by 03blk6mt
UPDATE: Dave B replied on the prices for the SE-R calipers and rotors and here it is:
Chris-
I can get the calipers for $108.20 per side, the front rotors are $83.70 each. I know the rotorswill fit thehubs, but I'm unsure on the calipers. You can give me a call @ 888-254-6060.
Thanks!
David Burnette, South Point Nissan
Now if we can just get one to do a side by side with an 04-05 Max caliper to see if the mounting holes are the same.
A lot less than $790 that's listed on the Mossy Performance site.
Chris-
I can get the calipers for $108.20 per side, the front rotors are $83.70 each. I know the rotorswill fit thehubs, but I'm unsure on the calipers. You can give me a call @ 888-254-6060.
Thanks!
David Burnette, South Point Nissan
Now if we can just get one to do a side by side with an 04-05 Max caliper to see if the mounting holes are the same.
A lot less than $790 that's listed on the Mossy Performance site.
#53
Originally Posted by irish44j
need to make sure that 108.20 is the caliper ASSEMBLY, not just the caliper itself. Remember, it's a 2-piece assembly!!
#58
They're silver with the SE-R stamped on them. I think they're a little ricey, but to each his own. Personally, the silver doesn't go with the color of my car, so I'm willing to go with 2k4 calipers (assuming that they are the same as the SE-Rs and will fit) and paint them black.
#60
Originally Posted by irish44j
yeah....having SE-R stamped on them is a major minus.....plus, if they're only single-piston calipers, I can't see how they are any better than the 6th gen max calipers anyhow....
just my .02
#64
I know what it looks like, I just figured you guys who are talking about it might want to post a pic....
But, since everyone else is too lazy, here it is:
(I personally think they are quite cheesy-looking and not an improvement over the 6th gen maxima arotors..)
But, since everyone else is too lazy, here it is:
(I personally think they are quite cheesy-looking and not an improvement over the 6th gen maxima arotors..)
#66
Originally Posted by Tek-Niq
I found these but dunno if you would like them: ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
Originally Posted by Maxima Dan
I saw those, but it makes me real suspicious that Brembo doesn't list them on their site. Has anyone tried them yet?
I have the same set for my 2000
#70
Link to Brembo Catalog
http://www.brembo.com/NR/rdonlyres/6...og20032004.pdf
here is the PDF Catalog for Brembo. Page 88 for Maxima specs.
Warnign large PDF file not for 56k.
here is the PDF Catalog for Brembo. Page 88 for Maxima specs.
Warnign large PDF file not for 56k.
#71
Originally Posted by dhanna_01
http://www.brembo.com/NR/rdonlyres/6...og20032004.pdf
here is the PDF Catalog for Brembo. Page 88 for Maxima specs.
Warnign large PDF file not for 56k.
here is the PDF Catalog for Brembo. Page 88 for Maxima specs.
Warnign large PDF file not for 56k.
#72
so anyone got 6th gen rotors and SE-R calipers installed? For 2k1 max, a spacer is needed to fit stock wheels on. Is this the same for the SE-R calipers? maybe they can fit without spacers since they have a flat front and thats what rubs without spacer when it comes to 6th gen calipers.
#73
Junkyard search for parts... How?
What's the best way to search junkyards for caliper assemblies (or any other part)?
Originally Posted by irish44j
on a side note....doing a junkyard search, one can EASILY find 2004-5 maxima calipers at junkyards for under $65 each (trust me, I just did the search)....
#74
Any definitive answer for 6th gen rears bolting on?
Any answer for putting 6th gen rears on as well? Parking brake still intact?
Originally Posted by DJSCIASCIA
So its safe to say that the 6th Gen and SE-R calipers fit the 5th Gens with no problems???
Also are the rears the same or are they different??
Also are the rears the same or are they different??
#75
Originally Posted by philpoe
What's the best way to search junkyards for caliper assemblies (or any other part)?
#76
Ok I saw a 6th gen that was from New Orleans in a junkyard a few days ago. Is it worth checking out? Im asking because of the fact that it probably set underwater for a few weeks, and there are alot of hurricane damage vehilces being brought into my area.
#78
Guest
Posts: n/a
Originally Posted by Maxima Dan
Are you guys saying that the 2K4 rotors AND calipers directly bolt on to the 2003s without any modification or relocation brackets? Has anyone tried this on a 2000 or 01? If this is true, I know what I'm doing this spring.
#79
don't buy from a junk yard go to the dealership my calipers only cost me $75 a piece
got rotors all around on the org for $220(120 shipped for the front only) slotted then buy whatever pads u want and ur good to gou could actually do the whole upgrade for under $350 not bad for a BBK
got rotors all around on the org for $220(120 shipped for the front only) slotted then buy whatever pads u want and ur good to gou could actually do the whole upgrade for under $350 not bad for a BBK
#80
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
hayne
6th Generation Maxima (2004-2008)
2
10-05-2015 11:53 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM