Automatic Window Problem

Reply Subscribe

Thread Tools

Search this Thread

May 5, 2014 | 07:12 PM

#81

Les7311

Senior Member

Joined: Mar 2008

Posts: 780

From: maryland

False alarm. .. my 05 doesn't have the nipple reset button. .. Pull door panel off and still no luck. ..

Anymore suggestions?

May 6, 2014 | 08:06 AM

#82

Montego Murph

Senior Member

iTrader: (1)

Joined: Feb 2010

Posts: 466

From: Central IL

You mentioned you have a 2005... a quick googly search showed me this:

http://nissanhelp.com/diy/maxima/pro..._procedure.php

May 6, 2014 | 12:53 PM

#83

Les7311

Senior Member

Joined: Mar 2008

Posts: 780

From: maryland

I must have the "other version" of a maxima door.

that same location has a "strong-adhesive tape" over a hole the size of 2 quarters, and nothing there. Even had help looking for nipple - nada, nein, nothing!!

Will check again. Great find though.

Quote:

Originally Posted by Montego Murph

You mentioned you have a 2005... a quick googly search showed me this:

http://nissanhelp.com/diy/maxima/pro..._procedure.php

Jul 20, 2021 | 08:45 AM

#84

rakebquraishi

Newbie - Just Registered

Joined: Jul 2021

Posts: 1

Quote:

Originally Posted by MaxDom03

Hey guys, I've been having some issues with my passenger side automatic window control. When I hit auto and let it go up it reaches the top, then goes back down 1/4 of the way. It doesnt fall, but rather the motor(?) brings it down. If I hold the button up while closing it, it stays up.

Has anyone had this problem before? Do I need a new reglulator/motor?

I have had the same issue. It is just the power window motor in your door that needs to be reset. The reason the window goes up and then down is because it is a safety feature in case someone has their hand in the way. The safety boundaries are not set so its malfunctioning. A reset of the motor is all that is required. The guys at the workshop just push a button on the motor for a few seconds and release it along with a small procedure. The motor can be accessed by opening up the interior door panel. My guy charges me around $50 for the job. Hope this helps.