NextGear Thermoshiled Intake Manifold Gaskets
#161
Originally Posted by mforrest100
My man... I hit you up about this so long ago and I never heard back from you. I am in BK like every weekend. If you really want to move this, you should hit me up and let me know something. I'll be a test subject by like the middle of next month if you want. I also have 5 3.5's in my group that will buy in a heartbeat. Hit me up. Next time we have a meet, you should come thru.
Mike
Mike
Keep this speak in another thread. This is the second time I have had to tell people to keep it seperate. Next time I will be lobbying for bans.
This isn't rocket sciene, everyone knows what is going on, just keep the topics seperate. I will see you all in the other thread.
Jeez...this all sound familiar, like I have had to coach these children before....
#162
Wow, who was this guy that said all this?
Originally Posted by sleeperI35
... I will shut up unless asked a direct question about my product. You are right Epacy, and whoever just said that I should have kept quiet until the spacer was ready is completely right. No more going back and forth on this and no more fighting about it. .... I apologize especially to Don Napier because I do not know him personally. I will not speak on another product from here on in. .... I didn't come to argue. ....My apologies once again.
#165
Originally Posted by steven88
Nope...i went to the dyno day today...for sure nobody did any test & tune of some sort...I was the only vq35 there really...there was anothe guy, but he was pretty much stock auto....so no testing at the west coast meet
#172
Originally Posted by fishpony
id be interested in these, popped my hood after a little driving and my IM was scorchin hot. If these really make your IM cool to the touch i believe there would be gains. probably little but still gain.
my IM is blazing hot after a quick drive around town...you couldn't possibly touch it without the need to say "ahhh"
#177
Originally Posted by steven88
epacy probably fell off...just like how he did a few months ago...LOL, when he got pwnt by the moderators...
Steven is just full of facts.....
I haven't been able to get Don to respond to my emails and haven't heard from Elon in a bit.
I have been in Denver and now in Chicago, so once I get back home I will try to hit up Elon.
#184
Guest
Posts: n/a
gone for a week and still nothing on this, its sad how things just come and go even when they have interest
#189
Originally Posted by kcowden
No, it's not just you, it says that it's "unavailable at this time" Mmmmm.... how curious...
#191
Originally Posted by UMD_MaxSE
in befo da lock?
is there any reason to still keep this open? Let me know, or it gets locked.
is there any reason to still keep this open? Let me know, or it gets locked.
#192
www.nextgearinc.com
I'm sending an e-mail to them now. Redline is installing my new engine this week along with headers and an UDP. Once in, I will have the following:
Hotshot headers
UDP
Injen intake
Cattman Racing Cat
17 degree timing.
If i can get the gaskets in time, i plan on hitting the dyno before the gaskets are installed and then after. I'll post the results. If the maker of the gaskets sees this post, please help me to make this happen by getting back to me ASAP. I'm sending you a e-mail via your site.
George Bauer
I'm sending an e-mail to them now. Redline is installing my new engine this week along with headers and an UDP. Once in, I will have the following:
Hotshot headers
UDP
Injen intake
Cattman Racing Cat
17 degree timing.
If i can get the gaskets in time, i plan on hitting the dyno before the gaskets are installed and then after. I'll post the results. If the maker of the gaskets sees this post, please help me to make this happen by getting back to me ASAP. I'm sending you a e-mail via your site.
George Bauer
#193
Originally Posted by GBAUER
www.nextgearinc.com
I'm sending an e-mail to them now. Redline is installing my new engine this week along with headers and an UDP. Once in, I will have the following:
Hotshot headers
UDP
Injen intake
Cattman Racing Cat
17 degree timing.
If i can get the gaskets in time, i plan on hitting the dyno before the gaskets are installed and then after. I'll post the results. If the maker of the gaskets sees this post, please help me to make this happen by getting back to me ASAP. I'm sending you a e-mail via your site.
George Bauer
I'm sending an e-mail to them now. Redline is installing my new engine this week along with headers and an UDP. Once in, I will have the following:
Hotshot headers
UDP
Injen intake
Cattman Racing Cat
17 degree timing.
If i can get the gaskets in time, i plan on hitting the dyno before the gaskets are installed and then after. I'll post the results. If the maker of the gaskets sees this post, please help me to make this happen by getting back to me ASAP. I'm sending you a e-mail via your site.
George Bauer
#196
Nix above e-mail. didn't make it. regardless: just spoke with the owner of Nextgear. I might have the gaskets for the dyno this weekend if they are in stock. i'll let you guys know.
#198
We do not have the gaskets in stock but we are cutting more right now. We want to get it dynoed for the Maximas ASAP.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
#199
Originally Posted by NextGear Don
We do not have the gaskets in stock but we are cutting more right now. We want to get it dynoed for the Maximas ASAP.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
#200
Originally Posted by NextGear Don
We do not have the gaskets in stock but we are cutting more right now. We want to get it dynoed for the Maximas ASAP.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
A lot of our time has been focused on our prototype coilover suspension for almost every import car application. The remainder of our time has been given to the meet we are throwing on July 30th in Nashville TN at the Tennessee Titans stadium(LP Field).
We appoligize for the delay.
Also, we were told before they were going to be dyno'ed and never heard anything. What is the situation this time?