arthur glazier

When I start the sometimes the auto ( for the trans) light on the dash flashes 10x. I have gotten error codes for hard shift but I am able to clear them. So my question is: is this some kinda code or something?

03VQMAX

iTrader: (46)

Check your fluid level...

arthur glazier

Is that what it means? or are you guessing

03VQMAX

iTrader: (46)

Did you check your fluid level?

arthur glazier

yes I checked the level, and it seems fine.

Amerikaner83

iTrader: (17)

seems fine...what's the color? What's the level? How did it smell? Look under the car for any leaks.


yes it is some kind of code. I am not sure how to pull the transmission condes, if they can be done off the standard OBD-II or not...

do you notice it shifting weird? Usually you won't get any flashes of the tranny code unless it's super bad...

Shift_Max

iTrader: (18)

Did you check the fluid level with the car running?

Xpcgamer

iTrader: (5)

+1!

02pearlmax

iTrader: (8)

Are all the flashes the same length? If one flash is longer than the others, take a look at FSM page AT-54 to see which code the tranny is trying to represent for you.

arthur glazier

I am getting DTC P0745 LINE PRESSURE SOLENOID VALVE error code, for hard shifts some times. So I did a drain and fill, for the trans about 1 month ago and was going to do another 1 soon. The drain and fill did not really helpl the problom, but it cant hurt. I am able to clear the code but after about a week it comes back. So I have not noticed the flashing (auto) light and thought it was new. I looked in the owners manuel and reads that if it flashes for for 8 sec. that thier's a problom with the trans. I have checked the level and no burt smell. I also checked the resister by the drivers strut and it was fine. All the flashes are the some length

Amerikaner83

iTrader: (17)

when you did the drain and fill, what SPECIFIC trans fluid did you use?