5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Keyless entry doesn't work

Thread Tools
 
Search this Thread
 
Old Dec 10, 2012 | 10:13 PM
  #1  
mrnando's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Dec 2012
Posts: 4
Keyless entry doesn't work

I'm having a problem with my 2001 Nissan Maxima. My remote, interior lights, truck release don't work when the car isn't on. I have a manual, but I can't locate the circuit breaker between the fuse link and the smart entrance control unit. Any help would be appreciated.
Old Dec 10, 2012 | 11:13 PM
  #2  
dfj240's Avatar
Senior Member
iTrader: (1)
 
Joined: Apr 2012
Posts: 676
From: TX/LA
Hmmm... Does the remote work at all when the car is on? If not, it may just be your remote.

As far as the circuit breaker location, go to www.nicoclub.com/fsm/maxima/2001/el.pdf and check out page el-354. At the bottom of the page it shows it behind the fuse box near the combination flasher unit. I'd imagine it's probably pretty tough to locate in the car itself, but that will give you a good guideline for where to look.

Anyways, hope that helps, beyond that I will yield to the expertise of others on here. Lol.

-Nathan
Old Dec 11, 2012 | 09:12 AM
  #3  
mrnando's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Dec 2012
Posts: 4
Yes, the door locks, trunk release and remote work when the car is on. That's why I'm thinking some is wrong with either the fuse link or circuit breaker. Could the Smart Entrance control Unit be bad too if works when the car is on?
Old Dec 11, 2012 | 12:39 PM
  #4  
DennisMik's Avatar
Senior Member
iTrader: (2)
 
Joined: Apr 2004
Posts: 10,644
From: Plano, TX
Since the items work with the car is on, then the fuse/circuit breaker is good. A fuse/circuit breaker cannot be bad when the car is off and fix itself while the car is on.

I'm not sure what the problem is but try unplugging the connectors on the SECU and then plugging them back in. I might help.
Old Dec 12, 2012 | 09:59 AM
  #5  
dfj240's Avatar
Senior Member
iTrader: (1)
 
Joined: Apr 2012
Posts: 676
From: TX/LA
Yea, he's spot on, if it was the circuit breaker or a fuse it wouldn't work at all, car on or not. It honestly, could just be the remote battery, or the remote itself, but unplugging the SECU, cleaning the contacts, and plugging it back in could sort it out.

-Nathan
Old Dec 18, 2012 | 01:12 PM
  #6  
mrnando's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Dec 2012
Posts: 4
Could the SECU be bad? the interior lights don't work at all, door open or on.
Old Dec 18, 2012 | 03:49 PM
  #7  
DjHackStyle's Avatar
Senior Member
 
Joined: Feb 2012
Posts: 972
From: Bronx, NY
Originally Posted by mrnando
Could the SECU be bad? the interior lights don't work at all, door open or on.
Checked the bulbs and fuse?
Old Dec 18, 2012 | 04:05 PM
  #8  
mrnando's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Dec 2012
Posts: 4
Yes, I replaced the fuse and bulbs are fine.
Old Dec 19, 2012 | 08:01 AM
  #9  
Aviation005's Avatar
Member
 
Joined: May 2011
Posts: 211
Originally Posted by mrnando
Yes, I replaced the fuse and bulbs are fine.

bad ground

check your battery and cables for corrosion
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ah2002
5th Generation Maxima (2000-2003)
13
Mar 9, 2016 01:42 PM
dr3am
5th Generation Maxima (2000-2003)
25
Oct 22, 2015 08:53 PM
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
Aug 27, 2015 08:27 PM
cstrasz
8th Generation Maxima (2016-)
3
Aug 27, 2015 08:07 AM
Flores94
General Maxima Discussion
1
Aug 13, 2015 01:17 PM




All times are GMT -7. The time now is 08:34 AM.