CT Block off plates and more....
04-30-2011, 06:28 PM
#42
updated first post with pictures of my installed plate on my car.
i did notice a short loss of torque from 0-20 but above that mph the car really moves and the rmp's jump way faster. this mod really gets its credit when on the freeway or above 40mph. i regret not doing this mod sooner
my opinion is the loss is the same minimal efftect as with a cold air intake
thanks to all
i did notice a short loss of torque from 0-20 but above that mph the car really moves and the rmp's jump way faster. this mod really gets its credit when on the freeway or above 40mph. i regret not doing this mod sooner
my opinion is the loss is the same minimal efftect as with a cold air intake
thanks to all
05-01-2011, 06:52 PM
#46
Did you torque your bolts or just take a guess on how how much to tighten them?
05-01-2011, 07:49 PM
#47
sorry i didnt see your first post. the vias has a gasket that will be reused. you could also use rvt sealant and it would work the same. i myself and others just torque the bolts for a nice tight feel. the gasket will seal any air leaks
05-01-2011, 07:51 PM
#48
thanks man!
im sorry that i started offering the needed bolts after your purchase.
Last edited by CXJ Performance; 05-01-2011 at 08:06 PM.
05-02-2011, 04:07 PM
#54
Senior Member
Join Date: Feb 2009
Location: DA Bronx, NY
Posts: 1,265
Cory for the guys who do not want to reuse the gasket, get some RTV silicone GASKET MAKER from any autoparts store and apply it, wORKS PERFECT
its like 3 buks, I have a BOP and used RTV, so have others that use the other brand. Cant go wrong for 25buks
its like 3 buks, I have a BOP and used RTV, so have others that use the other brand. Cant go wrong for 25buks
05-04-2011, 09:52 AM
#58
05-05-2011, 05:57 PM
#62
it does work for the 5.5 gen. yes i will refund as well
- 2002 - 2003 Nissan Maxima (5th generation 3.5L DOHC V6 VQ35DE w/o EGR)
- 2004 - 2008 Nissan Maxima
- 2002 - 2006 Nissan Altima
Last edited by CXJ Performance; 05-05-2011 at 06:00 PM.
05-06-2011, 08:32 PM
#64
i really like my spacers and bop too. great mods and i am so glad i got it from such a great company who did so much r&d and ensured great QC!
EDIT: sorry wrong thread, meant to type this in at NWP's thank you thread.
EDIT: sorry wrong thread, meant to type this in at NWP's thank you thread.
05-07-2011, 04:19 AM
#65
Senior Member
Join Date: Feb 2009
Location: DA Bronx, NY
Posts: 1,265
05-07-2011, 05:26 AM
#66
with close to 3,000 post i find your mistake hard to belive. its seems like a low blow.
maybe in the future once were more known and have a better rep you'll even buy from us. were , young , strong and have a positive out look on bringing not just nissan based performance products out with dyno proven results. we are a small group of engineers with a goal. all profits and monies from our own wallets have been used thus far to further that goal
thank you and everyone who have supported the cause thus far
if your mistake was genuine please delete it and post were it should be. we as vendors are sworn not to bash each other in any threads or post thus you dont see the same from me or them
05-07-2011, 06:53 AM
#67
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
BAD NEWS!!! PRODUCTION IS HALTED!!!!!!!!!!
Today i had a very painful accident at work and i wont be able to make anymore parts for a little while.
I got my finger caught in a plate rolling press and flattened my finger into a popcisle stick. i fractured it from the tip to the knuckle and recieved 9 stitches. the machine pinched it between the roller and the plate i was holding and went so far into in that i had to let it cycle the plate thru. i have 5 bops in black and 5 bare but no name tags or logos. there putting a workers compensation claim in case i need surgery. until a doctor says so im out of work and will not have access to the cnc machines. my partner may still be able to make the spacer kits into production. ill have to take things from there but i felt i had to let everyone aware of my accident. sorry guys
pics
notice how flat it is
Today i had a very painful accident at work and i wont be able to make anymore parts for a little while.
I got my finger caught in a plate rolling press and flattened my finger into a popcisle stick. i fractured it from the tip to the knuckle and recieved 9 stitches. the machine pinched it between the roller and the plate i was holding and went so far into in that i had to let it cycle the plate thru. i have 5 bops in black and 5 bare but no name tags or logos. there putting a workers compensation claim in case i need surgery. until a doctor says so im out of work and will not have access to the cnc machines. my partner may still be able to make the spacer kits into production. ill have to take things from there but i felt i had to let everyone aware of my accident. sorry guys
pics
notice how flat it is
05-07-2011, 07:55 PM
#69
You didn't even "edit" your post... 
05-08-2011, 09:56 AM
#70
05-10-2011, 11:33 PM
#71
installed my plate today.. im very happy with the plate and for the price you cant beat it for the gains you get when you punch it. i was actually shocked that i got torque steering switch lanes to pass someone ont he highway tonight. the car hit redline so easily and all i have a is a cone filter performance wise until tomorrow when i add catback. down low driving does have less power but at those speeds who really cares.
i hate emissions stuff, butterflies and extra crap you dont need. this cleans things up nicely
i hate emissions stuff, butterflies and extra crap you dont need. this cleans things up nicely
05-11-2011, 03:22 PM
#72
installed my plate today.. im very happy with the plate and for the price you cant beat it for the gains you get when you punch it. i was actually shocked that i got torque steering switch lanes to pass someone ont he highway tonight. the car hit redline so easily and all i have a is a cone filter performance wise until tomorrow when i add catback. down low driving does have less power but at those speeds who really cares.
i hate emissions stuff, butterflies and extra crap you dont need. this cleans things up nicely
i hate emissions stuff, butterflies and extra crap you dont need. this cleans things up nicely
thanks anthony for the review.
i personally cut , paint and drill each hole in every plate so its nice to see the hard work really pays off with reviews like that. its also the reason i can offer the plates at a cost everyone can afford.
05-17-2011, 06:30 AM
#74
On a brighter note, Installed mine last night. took it out. And didnt catch traction till 4th gear (roads were a little wet) Played for a while last night. It is a noticeable difference although i didnt see much low end loss personally. Took it easy driving to work this morning and (according to my MPG thing in the guages) got 37 MPG. I also noticed that my rpm's are lower at at certain speeds. All around great part and DEFINATELY worth $20.
Keep up the good work and I look forward to more parts out of you guys. You got a loyal customer here.
05-17-2011, 07:18 AM
#75
Seriously???? You are going to to try and cut down a company you obviously know nothing about. Shows a lot of charactor on your side
On a brighter note, Installed mine last night. took it out. And didnt catch traction till 4th gear (roads were a little wet) Played for a while last night. It is a noticeable difference although i didnt see much low end loss personally. Took it easy driving to work this morning and (according to my MPG thing in the guages) got 37 MPG. I also noticed that my rpm's are lower at at certain speeds. All around great part and DEFINATELY worth $20.
Keep up the good work and I look forward to more parts out of you guys. You got a loyal customer here.
On a brighter note, Installed mine last night. took it out. And didnt catch traction till 4th gear (roads were a little wet) Played for a while last night. It is a noticeable difference although i didnt see much low end loss personally. Took it easy driving to work this morning and (according to my MPG thing in the guages) got 37 MPG. I also noticed that my rpm's are lower at at certain speeds. All around great part and DEFINATELY worth $20.
Keep up the good work and I look forward to more parts out of you guys. You got a loyal customer here.
thanks alot
i ignore comments like above. i will keep in touch with everyone when new products are developed. look out for me around mid june for an exclusive engine mod
08-09-2011, 09:47 AM
#76
Junior Member
Join Date: Dec 2009
Location: Greenville, SC, USA
Posts: 37
Got my bop the other day put it on. Easy install, quite a bit of a difference for 20 bucks!! And it only took 3 days to get it! Thanx Cory! I think it should be mandatory for everyone to have this! 
Thread
Thread Starter
Forum
Replies
Last Post