New Amber & Wht LED's installed in front blinkers.
#82
Originally Posted by MAXDOUT04
In that video is it me or are the lights staying amber but flashing white? and without resistors how are thet blinking at a normal rate mine are on crack without resistors.
It's a mind trick, when I look at the video I took it seems that way as well. The lights are on solid wht and when you signal they blink to amber and then back to wht...
#95
Originally Posted by xoomer.com
is there a GB for these? If I have to buy these from autolumination I pick the lighttower II 1157 but do I pick white or amber??
#96
Thanks Dan, was about to order the wrong stuff.
Introducing the Switchback
1157 20 LED Combination Amber and White LED Tower Bulbs
Two Colors - One Bulb
CLICK HERE To See How This Operates
![](http://superlumination.com/images/auto_bulbs/3157switcha2.jpg)
![](http://superlumination.com/images/auto_bulbs/3157switchw2.jpg)
$24.99 Each
So I am ordering 2 of these Monday morning.
![](http://superlumination.com/images//auto_bulbs/newflash.gif)
1157 20 LED Combination Amber and White LED Tower Bulbs
Two Colors - One Bulb
CLICK HERE To See How This Operates
![](http://superlumination.com/images/auto_bulbs/3157switcha2.jpg)
![](http://superlumination.com/images/auto_bulbs/3157switchw2.jpg)
![](http://superlumination.com/images/auto_bulbs/1156_pt_wm.jpg)
So I am ordering 2 of these Monday morning.
#97
Originally Posted by xoomer.com
Thanks Dan, was about to order the wrong stuff.
So I am ordering 2 of these Monday morning.
So I am ordering 2 of these Monday morning.
http://autolumination.com/equalizers.htm
#98
i was thinking, could you mount the 3ohm equalizers on the rear lights even though you only have swtichbacks or any leds on the front blinkers? Since there is somewhere in the rear lights that is metal to attach the stabilizers to. would this work?
#99
not sure, but the method that blulyte (spelling) used with the zipties seems like a good idea, but if mounting them in the tailights would be a possibility then that woul be much easier to do!
#101
If you only get LEDs in the front or the rear then you have to get 2 6ohm equalizers, but if you get LEDs in both front and back then you need 2 3ohm equalizers.
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
#104
Originally Posted by !PrjctMax!
If you only get LEDs in the front or the rear then you have to get 2 6ohm equalizers, but if you get LEDs in both front and back then you need 2 3ohm equalizers.
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
#106
No, they weren't mounted in that pic, just sitting there. I pushed them down low away from the plastic before I put my tailight back in. I didn't mount them to metal but I have checked them again and have had no problems....
#109
Originally Posted by !PrjctMax!
If you only get LEDs in the front or the rear then you have to get 2 6ohm equalizers, but if you get LEDs in both front and back then you need 2 3ohm equalizers.
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
http://autolumination.com/images/leds/installation.jpg
Read the bottom red letters
does anyone have pics for the amber leds on their cars? thanks.
#110
Originally Posted by normkit108
oh wow. I'm thinking about getting just the amber leds for the turn signals. sorry, but what would the equalizers function as?
does anyone have pics for the amber leds on their cars? thanks.
does anyone have pics for the amber leds on their cars? thanks.
#111
**** looks ill
im am in the prosees of changing my turn singlas too
its a pain though
did the passenger side but the driver side is hard
cant get though the air filter part...
i take out the air filter, but after that theres no room to change the bulb
im am in the prosees of changing my turn singlas too
its a pain though
did the passenger side but the driver side is hard
cant get though the air filter part...
i take out the air filter, but after that theres no room to change the bulb
#114
Originally Posted by BIGDADDY2587
**** looks ill
im am in the prosees of changing my turn singlas too
its a pain though
did the passenger side but the driver side is hard
cant get though the air filter part...
i take out the air filter, but after that theres no room to change the bulb
im am in the prosees of changing my turn singlas too
its a pain though
did the passenger side but the driver side is hard
cant get though the air filter part...
i take out the air filter, but after that theres no room to change the bulb
You can do it, it just takes some patience. You have to pull the bulb out and into the little cave (I know not a technical term) in between the fender and the metal brace. It's a stretch but I've done it numerous times....
#117
Originally Posted by normkit108
im hoping my mechanic is able to do this..
![ughbowdown](https://maxima.org/forums/images/smilies/uggbowdown.gif)
![doublethumbsup](https://maxima.org/forums/images/smilies/dblthumb2.gif)