Does anyone have a wiring diagram for the 6th gen maxima or any input on wiring up the Apexi Neo which would be the same as the old Apexi AFC. Any help would be appreciated.

 

Use this as a starter:
http://www.mohdparts.com/emanage/ins...04AltimaEU.htm

All you need is MAF wire, TPS signal, RPM signal, Power & ground. Don't mess w/ the KS or O2 sensor wires.

And then go here:
http://forums.maxima.org/4740357-post2.html

Wiring it up is the same as any other AFC, but you need a pinout of your ECU, which is given in the first post. A smart thing to do prior to starting is downloading an FSM.

 

Thanks for the help bro.

 

Here is a link to the FSM if you need it.


http://phatg20.info/index.php?option...nc=select&id=1

 

Or here:
http://www.aubreyandcharles.com/NissanServiceManuals/

 

Where can I find a pinout of my ecu? The first link you sent me was for 2002-2004 but I need one for a 2006. Any help?

 

That's what you get for not letting me know you had on 06

.

 

My bad. I thought I did. Let me know if you can find out anything.

 

Why can't you just download the FSM and get the diagram for yourself?

 

In the process of doing that now.

 

Use this only as a guide. But instead, you will need your own 2006 pin-out & wire colors.



I can provide this very same diagram for your 06 later today if you can wait.

 

Please post the 2004 for my reading

 

I can do both, they are probably the same tell you the truth.

 

Thanks bro. I'm gonna take this to the shop now and see what we did wrong. Thanks again.

 

Do you think you can find the one for the 06 or are you sure they are the same layout?

 

Working on it man .... Been dranking a little bit tonight, so it is takin' a smidgen longer...

Step 1, = provide pin out of said year(s) {04-08}:



Step 2, provide AFC pinouts w/ respective colors:

 

Post up some pics of the install once you are all done. I ended up mounting my control in the sunglass drop down. Let us know what you think of the NEO.

 

I have it installed right now but I'm having issues with the correct pins to wire in the rpm and throttle features of the Apexi Neo. Anyone know anything on this? I was actually thinking of placing my piece in the Sunglass drop down as well...

 

So I guess nobody has the Apexi Neo on their 6th gen in here huh...I'm feelin' a little lonely on this one....

 

comeon nmexmax, step 2 lol .....

 

u-tec or t5 for the win neo is a pita

 

message RamBerg , he has the safc2 installed , im sure should be the same wiring, he might be able to help u if nmexmax hasnt chime in

 

Can you explain that in newb terminology...

 

http://www.6thgenmaxima.org/forums/viewtopic.php?t=5737
UTEC
http://www.turboxs.com/shop_prod.php?what_category=3





http://www.6thgenmaxima.org/forums/viewtopic.php?t=4610
TS

http://www.technosquareinc.com/

 

I've provided that information many o' times.

http://forums.maxima.org/6422772-post18.html

Also, it's easy to DL the FSM and reference the pins. Have any of you even attempted this?

 

I didn't do the install, a member from nycmaxima.org did it for me. I will check with him to see if he has a wiring chart. He did a few 6th gens but I don't know about the Neo.

 

bizzump....

 

Here's your Gerber Now use the SAFCII install from Jime (i.e. use common sense)

Since the A34 does not have a tach signal, I'm going to ASSume cyl 1-6 will work...