My 2004 Maxima stearing wheel is shaking (vibrating) when driving at 80 - 100
My 2004 Maxima stearing wheel is shaking (vibrating) when driving at 80 - 100
I bought 3.5 se maxima 2004, 195 kw. There is one problem with my stearing wheel at 80 - 100.. Where is the problem? Tyre balance, warped plastic down the radiator or wheels alignment? And plus I want to ask how much oil (in litres) I need to buy for my maxima for engine and how much oil for transmision. Thank you!
Could need a tire balance, or you could have flat spots on one or more tires.
I actually broke a belt in one of my goodyear touring a/s tires and it definitely caused some shaking at higher speeds before a tech found a slight bulge in one of them. It was especially disappointing because it still had a good bit of tread left
Oil capacities
I'm not sure what transmission you have, but you should consult the owners manual if you have it.
I actually broke a belt in one of my goodyear touring a/s tires and it definitely caused some shaking at higher speeds before a tech found a slight bulge in one of them. It was especially disappointing because it still had a good bit of tread left
Oil capacities
I'm not sure what transmission you have, but you should consult the owners manual if you have it.
Last edited by NC00DEK; Aug 24, 2019 at 08:30 PM.
You can rotate tires from front to rear and see if the vibration follows before rebalancing them but I would balance them anyway.
Is there more shimmy when braking from the HW speed? If yes, then your rotors warped.
Is there more shimmy when braking from the HW speed? If yes, then your rotors warped.
Thread
Thread Starter
Forum
Replies
Last Post
Smoothieking
4th Generation Maxima (1995-1999)
4
Feb 4, 2010 10:52 AM



