All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.
Sponsored by:
Sponsored by: CARiD

It's alive!!! 3.5 swap with cams

Old Mar 24, 2006 | 04:11 PM
  #81  
ajcool2's Avatar
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Man your doing the same thing to your max that I want to do. I was just talking to my bro yestarday about putting the 3.0 cover on the 3.5 when I get it. Then I'll pop my hood whenever they want. I cant wait to have this done. Send me a couple bucks from all the money you win with your new setup. Cant wait to see your time. Good job.
Old Mar 25, 2006 | 08:21 AM
  #82  
4x4Max's Avatar
Supporting Maxima.org Member
iTrader: (12)
 
Joined: Feb 2004
Posts: 2,577
Sounds insane, vq35 is a beast
Old Mar 26, 2006 | 09:38 AM
  #83  
choray911's Avatar
The Crazy Azz Cracka
iTrader: (1)
 
Joined: Aug 2003
Posts: 3,035
From: Chattanooga, TN
A2Z in Soddy runs the dyno jet, which version it is I couldn't tell you. Charlston uses a Mustang and Andrew in Calhoun has a dyno dynamics. I use andrew in Calhoun, With the trans breaks built in the dyno, he can actually do partial throddle tuning and get a better overall tune rather than just a wide open throddle run.

Choray

Originally Posted by 96sleeper
I will probably go to dynolab in marietta since I have dynoed there 4 times and he has all of my run files stored. Are any of the local ones a dynojet?
Old Mar 28, 2006 | 10:35 AM
  #84  
6spd_Hayes's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2002
Posts: 595
From: Harvest, AL
Originally Posted by 96sleeper
lol, I would be going to the dyno this weekend but I have a bachelor party out of town for a friend. I might try to hit up the dyno and track both next weekend, I can't wait either.

So, you want to try to make it to the track on April 7th??

I will have video camera in hand, will have it on the org for you before midnite....... :-)

That was funny about "96sleeper secret manifold mod"!!
Old Mar 28, 2006 | 10:41 AM
  #85  
96sleeper's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Nov 2000
Posts: 1,756
From: Chattanooga, TN
Originally Posted by 6spd_Hayes
So, you want to try to make it to the track on April 7th??

I will have video camera in hand, will have it on the org for you before midnite....... :-)

If you are coming I will try to make it for sure. I might give it a shot this weekend just to see where I am at.


That was funny about "96sleeper secret manifold mod"!!
lol, thanks for the help. After I dyno I will give more info if its okay with you...
Old Mar 28, 2006 | 10:52 AM
  #86  
6spd_Hayes's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2002
Posts: 595
From: Harvest, AL
Originally Posted by 96sleeper
If you are coming I will try to make it for sure. I might give it a shot this weekend just to see where I am at.

lol, thanks for the help. After I dyno I will give more info if its okay with you...
I am still undecided about the track. My wife may or may not be coming (so that will be my deciding factor). If she doesn't come, I will be bringing along my drag radials. Maybe if we have time you can try them out.

Since that is an 1/8th mile, I will be working on beating my best of an 8.84 @ 80. I just did a 2 degree timing advance and can tell a difference in the butt dyno. We will just see though. I may hit my local 1/8th this Sunday to know what to expect.

We can talk about the info dissemination later. Make sure you grab the run files when you dyno. I like the sound of your cams (and the exhaust cut out)!!
Old Mar 28, 2006 | 11:50 AM
  #87  
96sleeper's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Nov 2000
Posts: 1,756
From: Chattanooga, TN
Originally Posted by 6spd_Hayes
I am still undecided about the track. My wife may or may not be coming (so that will be my deciding factor). If she doesn't come, I will be bringing along my drag radials. Maybe if we have time you can try them out.

Since that is an 1/8th mile, I will be working on beating my best of an 8.84 @ 80. I just did a 2 degree timing advance and can tell a difference in the butt dyno. We will just see though. I may hit my local 1/8th this Sunday to know what to expect.

We can talk about the info dissemination later. Make sure you grab the run files when you dyno. I like the sound of your cams (and the exhaust cut out)!!

If your wife comes she can hang out with my wife, and we can still go to the track. 8.84 is killer, I have never run that fast. My car is (was) a 2nd 1/8th mile car. I think I may have hit one 8.9x, but the best slip I can seem to find is a 9.0x. Maybe now with a little more torque I will be faster in the first 1/8th.
Old Mar 30, 2006 | 06:11 PM
  #88  
4DRSpeed's Avatar
Project Ruby......
iTrader: (22)
 
Joined: Mar 2002
Posts: 2,282
From: Maryville, TN
Damn that sounds good!! Makes me want a 3.5 even more now!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM
09maxshawn11
5th Generation Maxima (2000-2003)
5
Sep 30, 2015 10:28 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:02 AM.